Routers & Trimmers

Single Flute Helical For drilling slotting, cutting aluminium anodised duralium and UPVC. Ideal for recessing and slotting extrusions. HSSE is a special grade for machining abrasive anodised finishes. more→*6mm shank.

Trend 50/19 8mm HSSE Helical Plunge Router Cutter

from £32.99 up to £39.99

Compare prices₂→

Single Flute Helical For drilling slotting, cutting aluminium anodised duralium and UPVC. Ideal for recessing and slotting extrusions. HSSE is a special grade for machining abrasive anodised finishes. more→*6mm shank.

Trend 50/17 8mm HSSE Helical Plunge Router Cutter

from £22.99 up to £41.95

Compare prices₅→

Single Flute Helical For drilling slotting, cutting aluminium anodised duralium and UPVC. Ideal for recessing and slotting extrusions. HSSE is a special grade for machining abrasive anodised finishes. more→*6mm shank.

Trend 50/08 8mm HSSE Aluminium Router Cutter

from £21.99 up to £24.99

Compare prices₆→

Single Flute Helical For drilling slotting, cutting aluminium anodised duralium and UPVC. Ideal for recessing and slotting extrusions. HSSE is a special grade for machining abrasive anodised finishes. more→*6mm shank.

Trend 50/06 6mm HSSE Helical Plunge Router Cutter

from £23.99 up to £27.99

Compare prices₆→

Single Flute Helical For drilling slotting, cutting aluminium anodised duralium and UPVC. Ideal for recessing and slotting extrusions. HSSE is a special grade for machining abrasive anodised finishes. more→*6mm shank.

Trend 50/05 8mm HSSE Aluminium Router Cutter

from £21.99 up to £24.99

Compare prices₆→

Single Flute Helical For drilling slotting, cutting aluminium anodised duralium and UPVC. Ideal for recessing and slotting extrusions. HSSE is a special grade for machining abrasive anodised finishes. more→*6mm shank.

Trend 4/90 1/2" TC Two Flute Straight Cutter with TCT Plunge Centre Tip 31

from £73.99 up to £83.95

Compare prices₅→

Two flute straight cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, mortising and drilling. Use Tungsten Carbide tooling when working with abrasive mate more→rials such as chipboard, MDF, plywood, certain hardwoods and hard plastic. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

Trend 4/8 1/2" TC Two Flute Straight Cutter with TCT Plunge Centre Tip. 25

from £49.99 up to £59.99

Compare prices₆→

Two flute straight cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, mortising and drilling. Use Tungsten Carbide tooling when working with abrasive mate more→rials such as chipboard, MDF, plywood, certain hardwoods and hard plastic. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

Trend 4/80 1/2" TC Two Flute Straight Cutter with TCT Plunge Centre TIP.25

from £61.99 up to £79.99

Compare prices₆→

Two flute straight cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, mortising and drilling. Use Tungsten Carbide tooling when working with abrasive mate more→rials such as chipboard, MDF, plywood, certain hardwoods and hard plastic. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

Trend 47/50X1/2TC Professional TCT Two Flute Pierce and Trim Cutter w- you

from £63.99 up to £72.95

Compare prices₅→

Combination pierce and trim cutters. Pierce and cut out apertures in laminate worktops. Base of the cutter acting as a guide follower. Will trim bottom and top laminate simultaneously. Specifications: more→D. 12.7 / 1/2in. C 24mm C2. 24mm

Trend 47/4 1/4" TC Pierce & Trim Cutter 6.3mm

from £25.99 up to £33.99

Compare prices₆→

Combination pierce and trim cutters. Pierce and cut out apertures in laminate worktops. Base of the cutter acting as a guide follower. Single fluted.

Trend 4/7 1/2" TC Two Flute Straight Cutter with TCT Plunge Centre Tip. 22

from £49.99 up to £58.95

Compare prices₅→

Two flute straight cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, mortising and drilling. Use Tungsten Carbide tooling when working with abrasive mate more→rials such as chipboard, MDF, plywood, certain hardwoods and hard plastic. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

Trend 4/70 x 1/2 TCT Two Flute Cutter 25.0 x 25mm TRE47012TC

from £57.95 up to £59.99

Compare prices₅→

Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Cor more→ners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

Trend 46/95 1/4" TC Profiler Cutter 12.7mm DIA

from £39.99 up to £46.95

Compare prices₆→

Two Flute Rounding Over Bits To form corner radius to shelves, table tops, etc. With ball bearing guide for curved work.

Trend 46/93 1/4" TC Bearing Guided Ovolo Cutter

from £63.99 up to £71.95

Compare prices₅→

Ovolo and rounding over cutters without bearing guides are chosen for panel work and edge moulding. Bearing guided cutters are ideal for curved work. All can be used on natural timbers, man-made parti more→cle and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table-tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. Self Guided cutters for rounding over edges, without the need for a side fence. If cutter is lowered a top quirk can be produced. Bull nose moulding can also be produced by taking a second pass from the opposite side of the workpiece. (D= Cutting Diameter, C= Length of Cut, R= Radius)

Trend 46/92 x 1/4 TCT 90 Shank Mounted Template Profiler 15.9 x 19.1mm TRE

from £50.95 up to £51.99

Compare prices₅→

Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight and curved work. more→For profiling and rebating applications only. NOT for plunge, cutting or grooving. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.

Trend 46/91 x 1/4 TCT 90 Shank Mounted Template Profiler 12.7 x 9.5mm TRE4

from £41.99 up to £42.95

Compare prices₅→

Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight and curved work. more→For profiling and rebating applications only. NOT for plunge, cutting or grooving. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.

Trend 46/82 x 1/2 TCT 90 Bearing Guided Triple Flute Cutter 12.7 x 38.1mm

from £79.99 up to £83.95

Compare prices₅→

Self-guiding triple flute cutters provide a super fine finish and longer life. Suitable for laminate or plywood overlay. This trimmer has twin bearings for stability by increasing the bearing surface. more→An industrial profiling tool for longer runs of work when a clean finish is needed. T.C.T. 1/2in Shank A Angle = 90 . C = 38.1mm. D = 12.7mm.

Trend 46/80 1/4" TC Trimming Cutter 12.7mm DIA

from £33.99 up to £39.95

Compare prices₅→

With ball bearing guide. To trim plastic or laminate facings. Used extensively in cabinet making and shop fitting. Suitable for straight or curved work.

Trend 46/6B 1/4" TC Bevel Trimc Utter 45 Degree

from £52.99 up to £60.95

Compare prices₅→

46/6B 1/4" TC Bevel Trimc Utter 45 Degree by Trend

Trend 4/66 22.0mm Professional TCT Two Flute Straight Router Cutters - 1/2

from £37.99 up to £46.95

Compare prices₅→

Two Flute Cutter for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have more→TCT plunge centre tips.

Trend 46/44 x 1/4 TCT Bearing Guided Rebater 24mm x 12.7mm TRE464414TC

from £81.95 up to £85.99

Compare prices₅→

This Trend 46/44 Rebater includes different size bearings for a choice of rebates, they provide easy set up and, accurate, depth of cut. This set is ideal for rebating straight and shaped work pieces, more→particularly with delicate applications such as musical instrument production when a small rebate is required for insertion of purfling. Specifications Tooling TCT. 1/4in Shank. By changing the bearing, the size of the rebate can be altered, It is supplied with 3 bearings. 22.0 mm bearing gives rebate of 1 mm. 19 mm bearing gives rebate of 2.5 mm. 16 mm bearing gives rebate of 4 mm. D = 24 mm. C = 12.7 mm.

Trend 46/390 x 1/2 TCT Bearing Guided Rebater 22.5mm x 50.8mm TRE4639012TC

from £110.95 up to £119.99

Compare prices₅→

This Trend 46/390x1/2TC Large Guided Rebater is bearing guided for straight curved work. It is for use with portable or stationary routers and is supplied as standard with ref BR/191 fitted. There are more→a variety of bearing rings available to give various rebate sizes. These rings are secured between the two bearings. D 50.8 mm C 22.5 mm B 12.7 mm E 19.1 mm E 15.9 mm OL 78 mm Specifications Shank Diameter 1/2 inch. Shank length 35 mm.

Trend 46/38 x 1/2 TCT Bearing Guided Chamfer 45 50 x 19mm TRE463812TC

from £101.95 up to £102.99

Compare prices₅→

These types of cutters are used for edging work and chamfer cutting on man made fibre boards, natural timbers and plastics. Tools are offered to produce various angles for chamfering. Ball bearing and more→pin guarded cutters enable curved work to be undertaken with bearings running along the board edge or a template. Typical trade applications include sign making, freehand engraving, cabinet making and decorative joinery. T.C.T. 1/2in Shank. A = 45 C1 = 19 mm C2 = 26 mm D = 51.5 mm B = 12.7 mm