Routers & Trimmers

Two flute straight plunging bits General-purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Trend 4/51/2" TC Two Flute Straight Cutter with TCT Plunge Centre Tip. 19.

from £59.99 up to £66.95

Compare prices₅→

Two flute straight cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, mortising and drilling. Use Tungsten Carbide tooling when working with abrasive mate more→rials such as chipboard, MDF, plywood, certain hardwoods and hard plastic. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

Trend 4/5 1/2" TC 2FL 19.0mm Straight Cutter

from £33.99 up to £54.99

Compare prices₆→

Two flute straight plunging bits General-purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Trend 4/50 x 1/2 TCT Two Flute Cutter 19.1 x 37mm TRE45012TC

from £52.99 up to £62.99

Compare prices₆→

Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Cor more→ners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

Trend 4/4 18.2mm Professional TCT 2 Flute Straight Cutter with Plunge Cent

from £35.99 up to £41.95

Compare prices₅→

Tungsten Carbide Tipped for abrasive materials such as Chipboard, MDF, Plywood, Hardwoods and Hard Plastics. Two flutes give a clean finish to the cut edges. All cutters are suitable for plunge router more→s. Cutters above and including 9.5mm have TCT plunge Centre tip

Trend 4/30 x 1/2 TCT Two Flute Cutter 18.0 x 50mm TRE43012TC

from £71.95 up to £73.99

Compare prices₅→

Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Cor more→ners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. This Trend 4/30 x 1/2 TCT Two Flute Cutter has the following specification D 18mm (45/64in) C 50mm OL 92mm Shank Diameter 1/2in

Trend 4/2 x 1/2 TCT Two Flute Cutter 16.0 x 19mm TRE4212TC

from £42.99 up to £43.95

Compare prices₅→

Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Cor more→ners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. This Trend 4/2 x 1/2 TCT Two Flute Cutter has the following specification D 16mm (5/8in) C 19mm OL 60mm Shank Diameter 1/2in

Trend 4/29 18.0mm Professional TCT 2 Flute Straight Cutter with Plunge Cen

from £43.99 up to £61.99

Compare prices₆→

Tungsten Carbide Tipped for abrasive materials such as Chipboard, MDF, Plywood, Hardwoods and Hard Plastics. Two flutes give a clean finish to the cut edges. All cutters are suitable for plunge router more→s. Cutters above and including 9.5mm have TCT plunge Centre tip

Trend 4/29 1/2" TC Two Flute Straight Cutter with TCT Plunge Centre Tip. 1

from £44.99 up to £55.99

Compare prices₆→

Two flute straight cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, mortising and drilling. Use Tungsten Carbide tooling when working with abrasive mate more→rials such as chipboard, MDF, plywood, certain hardwoods and hard plastic. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

Trend 4/24 1/2" TC 2FL 16.0mm Straight Cutter

from £42.99 up to £79.99

Compare prices₆→

Two flute straight plunging bits General-purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Trend 4/22 1/2" TC Two Flute Straight Cutter with TCT Plunge Centre Tip. 1

from £55.99 up to £65.95

Compare prices₅→

Two flute straight cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, mortising and drilling. Use Tungsten Carbide tooling when working with abrasive mate more→rials such as chipboard, MDF, plywood, certain hardwoods and hard plastic. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

Trend 4/2 16.0mm Professional TCT 2 Flute Straight Cutter with Plunge Cent

from £33.99 up to £46.99

Compare prices₆→

Tungsten Carbide Tipped for abrasive materials such as Chipboard, MDF, Plywood, Hardwoods and Hard Plastics. Two flutes give a clean finish to the cut edges. All cutters are suitable for plunge router more→s. Cutters above and including 9.5mm have TCT plunge Centre tip

Trend 4/1 x 1/2 TCT Two Flute Cutter 15.0 x 25mm TRE4112TC

from £58.95 up to £59.99

Compare prices₅→

Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Cor more→ners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

Trend 4/15 50.8/2" Professional TCT Two Flute Straight Router Cutters - 1/

from £79.99 up to £91.95

Compare prices₅→

Two Flute Cutter for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have more→TCT plunge centre tips.

Trend 4/1 1/4" TC 2FL 15.0mm Straight Cutter

from £49.99 up to £69.99

Compare prices₆→

Two flute straight plunging bits General-purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Trend 4/10 35.0mm Professional TCT Two Flute Straight Router Cutters - 1/2

from £75.99 up to £87.95

Compare prices₅→

Two Flute Cutter for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have more→TCT plunge centre tips.

Trend 4/08 x 1/4 TCT Two Flute Cutter 25.4 x 19mm TRE40814TC

from £53.95 up to £63.99

Compare prices₅→

The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hin more→ges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

Trend 4/07 22.2mm Professional TCT 2 Flute Straight Cutter with Plunge Cen

from £39.99 up to £44.95

Compare prices₅→

Tungsten Carbide Tipped for abrasive materials such as Chipboard, MDF, Plywood, Hardwoods and Hard Plastics. Two flutes give a clean finish to the cut edges. All cutters are suitable for plunge router more→s. Cutters above and including 9.5mm have TCT plunge Centre tip

Trend 3/9 13.0mm Professional TCT 2 Flute Straight Cutter with Plunge Cent

from £35.99 up to £37.95

Compare prices₅→

Tungsten Carbide Tipped for abrasive materials such as Chipboard, MDF, Plywood, Hardwoods and Hard Plastics. Two flutes give a clean finish to the cut edges. All cutters are suitable for plunge router more→s. Cutters above and including 9.5mm have TCT plunge Centre tip

Trend 3/8L x 1/4 TCT Two Flute Hinge Jig Cutter 12.0 x 19mm TRE38L14TC

from £37.95 up to £37.99

Compare prices₅→

Trend two flute hinge jig cutters with extra long shanks for deep grooving, rebating and morticing which are useful for template work when thickness of template restricts depth. Extra care must be tak more→en to avoid breakage. Take more passes than usual and only cut up to half the diameter of the cutter in one pass. C = 12 mm D = 19 mm 15/32 in OL = 66mm

Trend 3/85 x 1/2 TCT Two Flute Cutter 12.7 x 63mm TRE38512TC

from £49.99 up to £64.99

Compare prices₆→

Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Cor more→ners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

Trend 3/83DCX1/2TC Two Flute Worktop Jig Router Cutter 12.7mm 50mm 1/2" 3/

from £47.95 up to £49.99

Compare prices₄→

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Short shank for Makita 3600B & 3612BR, Ryobi and Hitachi route more→rs. Ideal for cutting kitchen worktops. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 50 • Overall Length Metric: 84

Trend 3/83D 1/2" TC 2FL 12.7mm Straight Cutter

from £37.99 up to £47.95

Compare prices₆→

Two flute straight plunging bits General-purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Trend 3/83 1/2" TC 2FL 12.7mm Straight Cutter

from £35.99 up to £49.99

Compare prices₆→

Two flute straight plunging bits General-purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.