Routers & Trimmers

This jig uses a set of interchangeable templates & with a router will cut the mortise & face-plate recess for popular door locks.

Fast and clean trimming: thanks to 550 W motor spinning at 33,000 RPM, and a rack and pinion depth system allows for easy depth of cut changes Ultra-compact design: This laminate trimmer features slim gripping area for effortless one-handed tool control The included flush trim roller guide: allows flush cutting tasks to be completed with a standard straight-fluted router bit, preventing the risk of marring delicate veneers upon contact Maximum visibility: The included parallel guide provides the added versatility for light groove routing, and the transparent polycarbonate base allows additional light into the cutting area Items Included: GLF 55-6, Fixed base, Parallel guide, Flush trim roller …

Multi-functional table top making jig. Create accurate precise MFT style worktops quickly with a plunge router. For router drilling 20mm holes at 96mm centres. Made from Compact Grade High Pressure Laminate 12mm thick. Two corner radii and 45 degree end cut. Edge guides for initial rows, index pins for indexing for subsequent holes. Recess aperture facility for desk tidy. Jig requires: A portable plunge router with 12.7mm (½") shank capacity and minimum 1300 watts. A template guide bush with 30mm outside diameter ref. GB30/A. A long series TCT plunge cut router cutter with 20mm diameter and 37mm cut length. Two clamps.

46/390 X 1/2 TCT BEARING GUIDED REBATER 22.5MM X 50.8MM

7/32-Inch Cutting Depth To be used on boards from 1/2 to 1-3/8-Inch thick Anti-kickback design, Non-Stick Orange Shield Coating 2 SinterHip Hi-Density Industrial Chrome Carbide cutting edges for long-lasting performance For cutting plywood, hardwood/softwood on router tables only Not for use on hand-held routers CMT bits were rated the best overall in comparison to other brand (Test by Wood Magazine)

Allows grooves and tenons to be cut using a router. Working length based on 30 mm guide bush and 12 mm diameter cutter being used:- Max. without end stops used 412 mm Max. with one end stop used 397 mm Max. with two end stops used 382 mm Max. working width using end stops* (12mm dia. cutter) 18 mm Max. width adjustment depending on router base diameter 70 mm *Due to end stop length

334 X 1/2 TCT AQUAMAC RECESSOR

Allows for routing in hard-to-reach areas and as close as 3/4" to a wall Ideal for counter tops, as well as kitchen and bathroom sink cut-outs Works with 1/4" shank bits For use with Makita compact routers

T4EKL VARIABLE SPEED ROUTER 850 WATT 110 VOLT

This Draining groove jig is made from 12mm hardwearing CNC machined phenolic.

Palm router plunge base design – durably built base designed for easy and precise plunge routing, compatible with Bosch GKF125CE palm routers Extremely smooth and precise plunge action - for easy and accurate plunge routing Micro Fine adjustment – accurate depth setting on the depth rod for precision Quick-clamp System – allows motor to be easily moved from base to base Precision centering design – Enables the subbase (and, if attached, An optional template guide Bushing) to be accurately centered, making it easy to keep bit on the intended cut line when using jigs and other guidance devices

The Makita RP0900X 1/4in & 3/8in Plunge Router is a high-durability tool with an excellent design. It has a 0-35mm (0 - 1-1/8in) plunge depth capacity with 3 adjustable depth stops for repetitive depth routing. It uses a scale level for adjusting depth of routing. It is supplied with a straight guide, 13mm wrench, 22mm wrench, 1/4in collet cone, 3/8in collet cone and a carry case. Specification Collet 1/4 or 3/8in Input Power 900W No Load Speed 27,000/min. Capacity Plunge 0-35mm Weight 2.7kg All vibration figures quoted are Tri-axial to EN60745 2006. Vibration Cutting MDF4 m/sec. Vibration K Factor 1.5 m/sec. Noise Sound Power 100 dB(A). Noise Sound Pressure 89 dB(A). Noise K factor 3 dB(A).

PH/JIG POCKET HOLE JIG

Ease of use: Revolutionary new woodworking depth adjustment system for easy and precise depth adjustment Power: Featuring a 1.25-Hp, 7.0 amp motor for compact versatility with speeds of 16,000-35,000 RPM Convenience: Wide-bit capacity - fixed base accepts bits up to 1-5/16-in wide Consistency: Constant response circuitry - monitors and maintains speed under load for consistent performance - provides overload protection and soft start for reduced start-up torque Comfort: Palm-grip design with soft grip and finger support pockets - provides exceptional comfort and control

One-Hand Router / 710 Watt / 30,000 rpm Idle Speed (max.)

Standard Base for Trim Router

Milling Accessories