Routers & Trimmers

Trend Guide Bushes can be attached to the base of the Router. They are designed to follow the contours of a template. Guide bush guides the router when using a template. Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base. Outside diameter 16mm Inside diameter 14mm Projection from plate 10mm

GB160 GUIDE BUSH 16MM DIA

GB12 GUIDE BUSH 12MM DIA E44175

GAUGE/D60 DIGITAL DEPTH GAUGE

GAUGE/1 DEPTH GAUGE

FTS/S/R FAST TRACK REPLACEMENT ROUGHING STONE 90-120G SILVER

FTS/KIT FAST TRACK PORTABLE SHARPENER

The FSN RA 32 800 allows for accurate repeated hole layouts during furniture construction.

The FSN RA 32 1600 allows for accurate repeated hole layouts during furniture construction.

This non-slip strip ensures better grip of the guide rail on the workpiece.

FOLDING FLUSH CUT SAW 120MM (4.3/4IN) 22TPI

This fine height adjuster simply fits onto the router and allows fine adjustment of the cutter height.

Designed to enable virtually any router to cut ellipses and circles. Used for corner tables, arches, desks and mirrors. Setting-up and operating is simple and effective, as proven by existing industrial users. A connector plate on the end of the bar fits directly onto the fence rods of Trend routers. For the fixing of other makes of routers, an accessory adaptor base plate is required. By using one slide, the jig can be adapted for cutting circles. With additional extension bars, larger ellipses and circles can be cut.

A pair of extension rods for the Trend Eclipse jig, 500mm long for extra large ellipses & circles.

DWS TF6 6IN DIAMOND TAPER FILE

DWS/LF/100 LAPPING FLUID 100ML

DWS DIAMOND TAPER FILE

Hold doors securely with The Trend D/STAND/A Door Stand 32mm - 55mm The Trend D/STAND/A Door Stand is designed to hold doors on their edge while routing hinge recesses and mortise for locks. The D/STAND/A features a non-scratch base and has an adjustable clamp to fit doors between 32mm and 55mm thick. Features: Holds door on its edge while routing hinge recess & mortise for locks Holds door securely Non-scratch base Adjustable clamp for doors 32 mm to 55 mm thick Allows door to be tilted back to assist fitting into the frame Specification: Maximum door weight: 50 Kg Net Weight: 11kg

DOOR CLAMP 55MM CAPACITY (RATCHET TYPE) D/CLAMP/A

Trend DGP/IP/SF Inner Plate Straight Fan The Trend DGP/IP/SF Inner Straight Plate Fan is an accessory designed to be used with the Drainer Groove Pro Jig Frame to create straight fan drainer grooves in solid timber and solid surface worktops. Made from 12mm hardwearing CNC machined phenolic, it is long-lasting and durable. Features: Made from 12mm hardwearing CNC machined phenolic Requires suitable plunge router with 30mm guide bush and R9.5mm cove cutter Must be used with the DG/PRO jig frame to maintain 0.5-degree fall Specification: Pitch: 40 mm to 62 mm Groove length: 432 mm Template Requirements: Guide bush: 30 mm Plunge router: 1/2-inch Cutter Cove: R9.5 mm Length: 500 mm …

Trend DGP/IP/LF Inner Plate Lightning Fan The Trend DGP/IP/LF Inner Plate Lightning Fan is suitable for use with the Drainer Groove Pro Jig Frame. Its job is to create straight fan drainer grooves in solid timber and solid surface worktops. It is made from 12mm CNC machined phenolic which is hard-wearing and robust for professional use. Features: Made from 12mm hardwearing CNC machined phenolic Requires suitable plunge router with 20mm guide bush and R6mm cove cutter with a long shank Must be used with the DG/PRO jig frame to maintain 0.5-degree fall Specification: Pitch: 32 mm to 44 mm Groove length: 425 mm Template Requirements: Guide bush: 20 mm Plunge router: 1/2-inch Cutter Cove: …

Trend DGP/IP/HR Inner Plate Hot Rod The Trend DGP/IP/HR is an accessory inner plate template for use with the Drainer Groove Pro Jig Frame to create grooves for hot rod in solid timber and solid surface worktops. Features: Made from 12mm hardwearing CNC machined phenolic Accepts hot rods of size 100mm, 200mm, 300mm and 400mm Requires suitable plunge router with 30mm guide bush Use Ref. C054AX1/2TC, R6.35mm cove (12.7mm diameter) for standard 12.7mm rods, or Ref. C053CX1/2TC, R6mm cove (12mm diameter) for 12mm rods. Use other cove cutters for other rod diameters. It is desirable to recess the rods into the worktop by approximately one third to one half of the rod diameter Hot rods not …

This Draining groove jig is made from 12mm hardwearing CNC machined phenolic.

CRAFTPRO FOLDING SHARPENING STONE