Routers & Trimmers

9/72 X 1/2 TCT BEARING GUIDED CORNER BEAD CUTTER 4.8 RADIUS

9/71 X 1/4 TCT BEARING GUIDED CORNER BEAD CUTTER 3.2 RADIUS

8127 COLLET SLEEVE 8MM TO 12.7MM

7E/3 X 1/4 TCT PIN GUIDED ROUND OVER 8.0MM RADIUS

7/01 X 1/4 TCT OVOLO & ROUND OVER 2.5MM RADIUS

Tradesman work top jig for up to 650mm worktops. Hard wearing CNC machined Compact Grade High Pressure Laminate 12mm thick jig that cuts both parts of the joint in 15 minutes including setting up. Left hand and right hand corners, 400mm radius peninsular joint, 35mm kitchen door hole. Fixed lengths for 600mm, 616mm, 635mm and 650mm wide worktops. Cuts up to 40mm thick worktops with or without anti-drip postformed edge. Two open ended bolt recesses (dog bone style) for 150mm bolts. 10mm diameter plastic pins with tapered shoulder for tight fit provides three point pin contact to ensure ease of setting up. Pins made from ABS plastic for strength. Jig requires: A portable plunge router

63127 COLLET SLEEVE 6.35MM TO 12.7MM

62/10 X 1/4 TCT DRILL/COUNTERSINK/COUNTERBORE

620/4WS COUNTERSINK

6200/8 TCT COUNTERSINK SET

6200/8 HS COUNTERSINK SET

5/1 X 1/4 TCT HINGE RECESSOR 12.7 X 19MM

50/51 X 8MM HSSE HELICAL PLUNGE BIT 8MM

50/19 X 8MM HSSE STEEL HELICAL PLUNGE BIT 5MM

50/08 X 8MM HSSE HELICAL PLUNGE BIT 8MM

50/06 X 8MM HSSE HELICAL PLUNGE BIT 6MM

50/06 X 1/4 HSSE HELICAL PLUNGE BIT 6MM

50/05 X 8MM HSSE HELICAL PLUNGE BIT 5MM

50/05 X 1/4 HSSE HELICAL PLUNGE BIT 5MM

4/8 X 1/2 TCT TWO FLUTE CUTTER 25.4MM X 25MM

4/80 X 1/2 TCT TWO FLUTE CUTTER 25.4MM X 37MM

47/4 X 1/4 TCT PIERCE & TRIM CUTTER 6.3 X 18MM

4/70 X 1/4 TCT TWO FLUTE CUTTER 25.0MM X 25MM

4/70 X 1/2 TCT TWO FLUTE CUTTER 25.0MM X 25MM