Pliers

• Suitable for safety wiring all types of fasteners, caps, drain cocks, valves and electrical connectors.• Maximum Capacity: ø1.5mm.Suitable for safety wiring all types of fasteners, caps, drain cocks, valves and electrical connectors. Maximum Capacity: ø1.5mm.• Suitable for safety wiring all types of fasteners, caps, drain cocks, valves and electrical connectors. • Maximum Capacity: ø1.5mm. • Model No. SMC53Technical Specification:Length: 190mmMaximum Capacity: ø1.5mmNett Weight: 0.04kgDimensions: Length: 210mm x Height: 5mmWeight: 0.053KgWarranty: 1 year

• Formed steel arms with insulated vinyl handles.• Suitable for ear-type hose clips found on fuel, cooling system and vacuum hoses.• Also used for securing CVJ boot clips.Formed steel arms with insulated vinyl handles. Suitable for ear-type hose clips found on fuel, cooling system and vacuum hoses. Also used for securing CVJ boot clips.• Formed steel arms with insulated vinyl handles. • Suitable for ear-type hose clips found on fuel, cooling system and vacuum hoses. • Also used for securing CVJ boot clips. • Model No. VS1633Technical Specification:Length: 235mmNett Weight: 0.32kgDimensions: Length: 30mm x Height: 310mmWeight: 0.365KgWarranty: 1 year

The IRWIN® Vise-Grip® Curved Jaw (CR) Locking Pliers feature a unique self-energising lower jaw that delivers 3x more gripping power than traditional locking pliers, with absolutely no slipping or stripping. They can establish multiple contact points, guaranteeing a significantly tighter grip. As a result, the CR range is especially well-suited for performing in greasy work environments and for manoeuvring in tight spaces where a worker cannot easily get two hands on a tool. The patented curved jaw securely grips multiple surface shapes including round pipes, square or hex bolts and more. The slotted geometry of the new ‘self-energising’ Vise-Grip CR locking pliers exponentially …

03 01 160 SB Combination PliersWith gripping zones for flat and round material, suitable for versatile use. With cutting edges for soft and hard wire. Long cutting edges for thicker cables. Cutting edges additionally induction-hardened, cutting edge hardness approx. 60 HRC. self-service card/blister. Cutting capacities medium hard wire (diameter): Ø 3.1 mmCutting capacities hard wire (diameter): Ø 2.0 mmCutting capacity copper cable, multiple-stranded: Ø 10.0 mmCutting capacity copper cable, multiple-stranded: 16.0 mm²

These IRWIN® Vise-Grip® WRC Curved Jaw Locking Pliers are ideal for a variety of applications and material shapes. They are made from high-grade heat-treated alloy steel for maximum toughness and durabililty. The hardened teeth are designed to grip from any angle, and the curved jaw shape is better for fitting around curved work shapes. The pliers classic trigger release provides maximum locking force. The hex key adjusting screw tightens to adjust pressure and draw materials together and also provides a controlled release. The in-built wire cutter will cut screws and bolts of up to 1/4 inch (6mm) diameter in progressive bites.These Irwin Vise-Grip Curved Jaw Locking Pliers have the …

• Designed for the installation and removal of ø40-100mm piston rings.• Jaws are shaped to protect the piston ring from damage.• Vinyl gripped handles with spring-return mechanism.Designed for the installation and removal of ø40-100mm piston rings. Jaws are shaped to protect the piston ring from damage. Vinyl gripped handles with spring-return mechanism.• Designed for the installation and removal of ø40-100mm piston rings. • Jaws are shaped to protect the piston ring from damage. • Vinyl gripped handles with spring-return mechanism. • Model No. VS1642Technical Specification:Nett Weight: 0.24kgDimensions: Length: 3mm x Height: 290mmWeight: 0.308KgWarranty: 1 year

Knipex 2201160 Round Nose Pliers 160mm
The Knipex 2201160 Round nose pliers measure 160mm in length with 30mm long jaws. They have plastic coated handles for a comfortable grip and are intended for use bending wire loops.Features:
- For bending wire loops

- Round, short jaws; finely ground

- Smooth tips
Specification:

- Part Number: 2201160
- Pliers: black atramentized

- Head: polished

- Handles: plastic coated

- Weight: 135 g

- Dimensions: 160 x 50 x 13 mm

- Standard: DIN ISO 5745

- REACH compliant: does not contain SVHC

- RoHS compliant: not applicable

- Jaw thickness (joint) (T1): 9.5 mm

- Tips thickness (T2): 3.0 mm

- Jaw length (L3): 30.0 mm
<…

Features: - For stripping solid, stranded or finely stranded conductors with standard insulation- With V-shaped cutting edge for wires and strands up to a max. of íëí‡ 5 mm or 10 mmí_ conductor cross section- With adjustable screw for easy adjustment to the required wire or strand diameter- With opening spring- Handles with ergonomically shaped SoftGripp multi-component sleeves- Made of tool steel, forged, oil-hardenedSpecifications: - Length in millimetres: 160- Length in inches: 6 1/4- Cutting edge shape: Front Cutter- Cable - Al + Cu multi-wired conductor single and stranded conductor - cutting value in millimetres: 5- Cable - Al + Cu multi-wired conductor single and stranded conductor - cutt…

• One of a comprehensive range of Premier Hand Tools, suitable for daily professional use.• Adjustable rigid dividers for the organised storage of a wide variety of pliers.• Holds up to 10 pliers.• Manufactured from ABS plastic.• Ideal for using in tool chest drawers.Adjustable rigid dividers for the organised storage of a wide variety of pliers. Holds up to 10 pliers. Manufactured from ABS plastic. Ideal for using in tool chest drawers.• Adjustable rigid dividers for the organised storage of a wide variety of pliers. • Holds up to 10 pliers. • Manufactured from ABS plastic. • Ideal for using in tool chest drawers. • Model No. PR01Technical Specification:Capacity: 10Length: 250mmDimensions: Len…

Bahco Slip Joint Pliers with parallel action jaws with an accurately machined joint which will not slip under load, when used on workpieces of various shapes. The pliers are made from high performance alloy steel and have a black, anti-rust finish. They have plastic coated handles for increased comfort in use. Parallel, hardened jaws with both flat and pipe gripping jaws. The jaws grip parallel in all positions up to the maximum jaw opening width. Replaceable bolt joint available.

• Part of the Siegen by Sealey range of quality tools at competitive prices.• Manufactured from drop-forged, heat treated steel with a fully polished finish.• Ideal for use in areas with limited access.• Non-slip foam cushion grip handles.• Lifetime guarantee*.Manufactured from drop-forged, heat treated steel with a fully polished finish. Ideal for use in areas with limited access. Non-slip foam cushion grip handles.Technical Specification:Length: 400mmMaximum Jaw Capacity: 70mmNett Weight: 0.51kgType: Needle Nose StraightDimensions: Length: 20mm x Height: 450mmWeight: 0.496KgWarranty: Life

49 21 A01; Circlip Pliers; KNIPEX; 3 10 130

These Faithfull punches are made from uniformly heat treated carbon steel and are used for removing pins in parallel holes. The removal of the pins should first be started with a hand or taper punch to avoid damage to the end of the parallel punch.The set of eight punches include one of each of the following.1.5mm , 2.5mm , 3.0mm , 4.0mm , 5.0 mm , 5.5mm , 6.0mm and 8mm Length: 100mm (4 in)Additional Information:• Punch Type: Set

The Teng Tools Mega Bite range of Pliers have been designed to ensure the highest quality and optimum functionality. The overall length of the pliers gives a maximum leverage to suit the pliers function. These Teng Tools Long Nose Pliers have long, straight jaws with serrated grip surfaces and allow up to a 72 degree cutting angle. They are made from high Carbon Steel, with Titanium coated joints for excellent strength and durabililty. For a comfortable grip, the pliers have vinyl coated handles. The TENMB461 Mega Bite Long Nose Pliers have the following specifications Length 155mm (6 inch). Cutting capacity piano wire 0.5mm. Cutting capacity Steel wire 1.0mm.

Designed specifically for crimping ScotchLok° terminals used in the electronic, telecommunications and the automotive industries. For crimping and Seating UG, UR, and UY connectors. Manufactured from carbon steel, oil hardened and tempered with smoothly ground jaws. Fitted with a spring between the handles for extra control. Display packed.

Forged from selected tool steel with tungsten carbide tipped cutting edges and spring-loaded handles. Ideal for cutting and trimming ceramic or stone tiles. Display packed.

Curved-jaw self-locking nickel-plated pliers. Adjustable jaw opening and soft-grip handles with quick-release lever. Includes 130, 170 and 210mm.

Bahco Slip Joint Pliers with parallel action jaws with an accurately machined joint which will not slip under load when used on workpieces of various shapes. The pliers are made from high performance alloy steel and have a black anti-rust finish. They have plastic coated handles for increased comfort in use. Parallel hardened jaws with both flat and pipe gripping jaws. The jaws grip parallel in all positions up to the maximum jaw opening width. Replaceable bolt joint available. Length: 150mm (6 in). Jaw opening: 23mm (7/8 in). Weight: 100g.PTDBAH222D

Manufactured to exacting European standards individually tested to 10,000 volts and approved for working around live circuits that do not exceed 1,000 volts. The bi-material handles offer the user improved control and grip, incorporating slip guard shoulders for additional safety. They are resistant to temperatures from -20° to +70° C making them ideal for use in demanding or hostile environments. Features: Heat-treated, high chrome steel Tested up to 1,000V, DIN/ASO/ANSI compliant Hand-ground induction hardened blades For cutting copper, aluminium and piano wire Specifications: Dimensions: H:7.1 x W:24.1 x D:2.6 cm Colour: Multi Guarantee:1 year Material: Bi Material Model Number: STA084009

48 21 J31; Circlip Pliers; KNIPEX; 210

Fencing Pliers are ideally suited for fencing and wirework. These versatile pliers perform the following functions: nail extraction, nail driving, staple extraction, wire cutting, wire pulling and wire squeezing. Manufactured from chrome vanadium steel with a rustproof, satin nickel finish and fitted with cushion grip sleeves for user comfort. Features: Rustproof, satin nickel finish Non-slip handles Non-slip handles For fencing and wirework Specifications: Dimensions: H:33.8 x W:3.0 x D:9.0 cm Colour: Multi Guarantee:5 years Material: Chrome Vanadium Steel Model Number: FAIPLF10N

Milwaukee Torque Lock Locking Tools provide faster tool setup and more locking force for the professional tradesmen. The thumb screw provides the user with a more convenient geometry for hand force, while providing clearance to generate more torque with the unique screwdriver through-hole design. Featuring hardened jaws for more gripping power, and forged alloy steel for maximum durability Milwaukee locking tools are made for the toughest jobsite. Milwaukee stands behind their product and offers a Limited Lifetime Warranty with all locking tools. Specifications • Length: 125mm Features and Benefits • Torque Lock faster setup and easy release • Curved Jaw maximizes pressure points …

Loc-Line Assembly Pliers are specially designed to simplify the quick and easy assembly of modular coolant hose systems. Highly recommended for use with Loc-Line products, these pliers ensure a secure and efficient connection. Available for both 1/4" and 1/2" systems, they are constructed from durable, high-quality plastic, ensuring long-lasting performance and reliability. These assembly pliers are an essential tool for anyone working with Loc-Line coolant hoses, making the assembly process faster and more straightforward. Features & Benefits • Available with either a 1/2in. or 1/4in. capacity to suit your requirements • Ensures quick and easy assembly and disassembly of your coolant …

Expert Quality, drop forged from chrome vanadium steel, hardened and tempered with additionally induction hardened cutting edges. Lacquered finish for corrosion protection with heavy duty, soft grip handles with slip guards. Display packed.