Vises & Clamps Bessey

With malleable cast iron arms
Practical thumb screw
Span wide: 150mm

Movement of the lever is converted into an axial movement of the push rod
Adjustable clamping force up to 1,100 N depending on the setting screw in the joint
Span wide: 25mm

The Bessey KFP Board Panel Sheet Carrier has a load bearing capacity of 75kg. Ideal for safely carrying panels such as wood sheets, chipboard panels, glass and plexi glass. They also feature high-friction rubber coating on the moving clamping jaws. Specifications • Weight: 1.01kg • Opening min/max: 10-65mmFeatures & Benefits• Load-bearing capacity 75kg • Safe lifting and carrying of panels such as wood sheets, chipboard panels, glass and plexi glass • High-friction rubber coating on the moving clamping jawsContents• Pack of 1

Pair of * jaw pads for K-Body REVO parallel clamps
Jaw pads are resistant to glue, paint and grease solvents

Quick – up to 5 times faster than regular clamps
Secure – unaffected by vibrations
Span wide: 200mm

Clamping force up to 2,700 N.
Can be replugged for expansion – tool-free at EZM, EZL, EZXL thanks to simple release mechanism via push button on the top.
Ergonomically shaped 2-component plastic handle with pump mechanism and integrated release lever behind the rail.
Rubberised protective caps with cross prism for a secure hold of round, pointed and angular parts.
One-handed operation without effort.

Quick fixing thanks to clamping levers on the side
Makes full-surface working of the work piece possible – even round and flat parts
Patented pull-down mechanism prevents the work piece from lifting from the table surface when clamping – even without fastening screws

Parallel clamping surfaces with extra large contact surfaces
Clamping various shapes, around the rail
Span wide: 300mm

Tempered profile and sliding arm for sprung and elastic clamping
Lever handle with an indexing mechanism for controlled, fast and vibration-proof clamping
Clamping height: 300mm

Screw Clamp / Tool Steel

Tempered profile and sliding arm for sprung and elastic clamping
Lever handle with an indexing mechanism for controlled, fast and vibration-proof clamping
Clamping height: 300mm

Precise, individual clamping
Tempered profile and sliding arm for sprung and elastic clamping
Lever handle with an indexing mechanism for controlled, fast and vibration-proof clamping
Item package weight: 0.94 kilograms

Value for money
Good product with good quality
Durable

Adjustment path (mm): 35 / projection (mm): 70 / weight (kg): 0.58
Useful addition to the BESSEY door frame brace TU and TMS
High-quality 2-component plastic handles
Uncomplicated handling - even for the layman
For quick, precise alignment and fixing of door chucks

Can support loads of up to 350kg
Extremely stable construction with high strength steel piped & non slip PVC contact surfaces
One-hand operation thanks to pump mechanism handle
Quick release button for quick extension & retraction
Contact surfaces pivot from -45 ° to + 45 °

The Bessey STE Telescopic Pump Action Dry Lining Support Prop Clamp is resilient up to a maximum of 350 kg when the telescopic rod is fully retracted. It also has an extremely stable construction due to highly durable steel pipes and non-slip PVC contact surfaces. The pump allows single-handed operation thanks to 2-component plastic handle with pump mechanism. Specifications • Length: 2.5M • Minimum Length: 1450mm • Maximum Length: 2500mmFeatures & Benefits• Can be precisely set to requirements and quickly and safely released • Controllable holding force by turning the support on the grip • Extremely stable construction for up to max 200kg load-bearing capacity …

Complete clamp set in ready to GO standard systainer case
Pre-drilled holes ready for the clamps to be situated as required
Bessey AUTO height adjustable toggle clamps (6 supplied)
One size of the Bessey toggle clamp replaces multiple competitor sizes simultaneously.
Pressure on toggle clamp can be adjusted so that even sensitive workpieces, e.g. With veneered or varnished surfaces, can be gently clamped
16 piece clamp set (10 clamps and 6 adaptors) clamps supplied 4 x stc-hh50 open 40mm horizontally, height auto adjusts, clamping force 2.500 and 2 x stc-ihh25 opens to 35mm push/ pull type, clamping force 2.500 and 6 x Sets of adaptors

One Hand Clamp / Plastic / Max. Load 270 kg

Clamping force up to 2,700 N.
Ergonomically shaped 2-component plastic handle with pump mechanism and integrated release lever behind the rail.
Rubberised protective caps with cross prism for a secure hold of round, pointed and angular parts.
One-handed operation without effort.
International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

One Hand Clamp / Plastic / Max. Load 270 kg

One Hand Clamp / Plastic / Max. Load 270 kg

One Hand Clamp