Electric Underfloor Heating

Key Features:Eurocone compression adaptor 16 x 3/4"Designed for installing underfloor heatingConnects a Warmup S3 manifold to a 16 x 2mm PEX or PE-RT underfloor heating pipeThis Warmup 16 x 3/4" PEX-PERT Eurocone compression adaptor connects a Warmup S3 manifold to a 16 x 2mm PEX or PERT underfloor heating pipe. A useful pipe fitting when setting up your Warmup underfloor heating system.

Key features: Easily secure your ProWarm Tile Backer Pro boards to a timber subfloorOne pack covers 7 boardsThis handy ProWarm 25mm Fixing Pack ensures you can secure your ProWarm tile backer pro boards to a timber subfloor with ease. The ProWarm fixing pack includes 100x25mm Pozi Drive Screws and 100x Washers. The ProWarm fixing pack is capable of fixing 6mm and 10mm ProWarm Tile Backer Pro insulation boards to timber subfloors, with one pack including sufficient fixings for up to 7 boards.Please note: we would also recommend fixing the boards with a 3mm bed of flexible tile adhesive. Additional information:25mm screw

Key features:Quick & easy installationSuitable for all floated floor finishesBoard dimensions: 1200 x 600mm10mm thickProWarm™ XP-PRO Insulation Boards are specifically designed for use with the electric underfloor heating systems. The main two applications are:Floated on top of a concrete or timber subfloor with an underwood foil heating mat laid on top, followed by a floated engineered wood or laminate floor finishFixed to a concrete subfloor with flexible tile adhesive with an under tile mat or loose cable laid on top. This can then be covered with a latex levelling compound and finished with a tile or vinyl floor finishAs well as providing excellent thermal insulation, these panels will im…

Key Features:Glass fibre tape creates waterproof joints between boardsSimple installation with self-adhesive propertiesOne roll per 25 boardsFully complies with CE legislationWe’ve all taken on board the message that improving our insulation can not only make our houses warmer, it can cut the costs of your heating bills too. If you are installing insulation panels in a loft conversion or extension, then this is the tape you’ll need. It’s designed to fasten the insulation panels together securely and too not let that precious warm air escape between the joins. The tape is waterproof too, and one 90 metre roll is enough to securely join 25 standard insulating panels together.Simplicity of UseUsi…

Key features:Quick & easy installationSuitable for all floated floor finishesBoard dimensions: 1200 x 600mm6mm thickProWarm™ XP-PRO Insulation Boards are specifically designed for use with ProWarm's electric underfloor heating systems. The main two applications are:Floated on top of a concrete or timber subfloor with an underwood foil heating mat laid on top, followed by a floated engineered wood or laminate floor finishFixed to a concrete subfloor with flexible tile adhesive with an under tile mat or loose cable laid on top. This can then be covered with a latex levelling compound and finished with a tile or vinyl floor finishAs well as providing excellent thermal insulation, these panels wi…

Key Features:Single-component primerComes ready to useSolvent-free and bond-enhancingUsed to prepare absorbant and non-absorbant walls and floors with/without surface heatingIdeal to use before laying tile adhesives, levelling compounds and Warmup Peel & Stick systemsFrom Warmup, this bond-enhancing, single-component primer is solvent-free and comes ready to use. The primer can be used to prepare absorbent and non-absorbent walls and floors, with or without surface heating. It's the ideal primer to use before laying tile adhesives, levelling compounds, and Warmup Peel & Stick systems and can be used as a deep-penetrating primer on absorbent surfaces.Please Note:Ensure that contacting substrates,…

Key features:Compatible with all ProWarm underfloor heating thermostatsProtect sensitive floor finishes from overheatingRegulate floor temperature and air temperature simultaneouslyThe Prowarm floor probe can be used as either an additional or replacement floor temperature probe for the entire Prowarm thermostat range. This enables the user to regulate the floor temperature which is crucial when using a sensitive floor finish such as vinyl, amtico or Karndean. Additional information:3m length10k Ohms resistance @ 25 Degrees50 years guarantee

Key features:Quick and easy installationSuitable for all floated floor finishesBoard dimensions: 1200 x 600mm6mm thickProWarm™ BACKER-PRO tile backer insulation boards are high quality extruded polystyrene panels covered with a fibreglass mesh, making them durable and easy to fit. They are designed for use with Prowarm under tile heating cables and mats but an also be used as an insulated backer board under a tiled floor finish. Please note these are not suitable for underwood foil heating mats.ProWarm™ BACKER-PRO tile backer insulation boards are particularly suited to underfloor and under tile heating applications. Installation below underfloor heating systems on an existing un-insulated conc…

Key features:Everything you need to install a ProWarm Undertile mat or cableIncludes floor primer to ensure maximum bond strengthIncludes conduit to house floor probeThe ProWarm Undertile Heating Kit Accessories for up to 12m2 offers everything you'll need to install your ProWarm Undertile mat or cable. These installation accessories will ensure a quick and easy process when laying your electric heating mat/cable and assist with a simple installation even for the beginner DIYer.The ProWarm™ Heating Kit Accessories contains the following components designed for use with the ProWarm™ Undertile Heating Mats/Cables:1 x 2m Length of Conduit1 x Roller1x Ultra Prime1x Duct Tape

Key features:Quick & easy installationSuitable for a wide range of floor coveringsBoard dimensions: 1200 x 600mm20mm thickProWarm™ XP-PRO Insulation Boards are specifically designed for use with the electric underfloor heating systems. The main two applications are:Floated on top of a concrete or timber subfloor with an underwood foil heating mat laid on top, followed by a floated engineered wood or laminate floor finishFixed to a concrete subfloor with flexible tile adhesive with an under tile mat or loose cable laid on top. This can then be covered with a latex levelling compound and finished with a tile or vinyl floor finishAs well as providing excellent thermal insulation, these panels wi…

Key features:Repair a cut or damaged underfloor heating mat/cableOne kit contains enough material to repair 1 damaged areaEasy to follow instructions included The ProWarm™ Cable repair kit can be used for the loose cable or the heating mat systems. It offers a step by step guide to repairing a cable and also contains the materials to do so. This convenient repair kit can be used if the heating element has simply been cut straight through or if a small section has been damaged, as the kit provides a bridging wire to span a damaged section measuring up to 12cm in length. It is a low cost solution to fixing a problem with the heating element without the need to replace the entire heating cable or…

Key features:Quick and easy installationSuitable for a wide range of floor finishesBoard dimensions: 1200 x 600mm50mm thickProWarm™ BACKER-PRO tile backer insulation boards are high quality extruded polystyrene panels covered with a fibreglass mesh, making them durable and easy to fit. They are designed for use with Prowarm under tile heating cables and mats but an also be used as an insulated backer board under a tiled floor finish. Please note these are not suitable for underwood foil heating mats.ProWarm™ BACKER-PRO tile backer insulation boards are particularly suited to underfloor and under tile heating applications. Installation below underfloor heating systems on an existing un-insulated conc…

Key features:Quick & easy installationSuitable for all floated floor finishes ProWarm™ ProFoam Insulation Boards are specifically designed for use with the underwood foil electric underfloor heating systems. They can be floated over a concrete or timber subfloor, and can easily be cut to size or shape using a Stanley knife. Once laid, the Prowarm underwood foil heating mat can be laid on top, followed by a floated engineered wood or laminate floor finish. ProWarm™ ProFoam Insulation Boards have a high compressive strength (30tonnes / m2) and are water resistant, making them an excellent choice for multiple applications. They are extremely lightweight at just 70 grams per sheet making them easy…

6mm Pro Range heating cable designed for covering with a 50mm screed for heating beneath nearly any floor covering. This loose cable is particularly suitable for new build and major renovation work where it is very quick to install and where the cable-to-cable distance can be varied as required. The cable spacing dictates the output of the system per square meter and with the correct output the cables can provide primary and secondary heating in even badly insulated rooms. Supplied with a 2m coldtail and robust 100% earth shielded heating cable and coldtail to comply with the 18th Edition, and covered by Heat Mat's Lifetime Warranty.

6mm Pro Range heating cable designed for covering with a 50mm screed for heating beneath nearly any floor covering. This loose cable is particularly suitable for new build and major renovation work where it is very quick to install and where the cable-to-cable distance can be varied as required. The cable spacing dictates the output of the system per square meter and with the correct output the cables can provide primary and secondary heating in even badly insulated rooms. Supplied with a 2m coldtail and robust 100% earth shielded heating cable and coldtail to comply with the 18th Edition, and covered by Heat Mat's Lifetime Warranty.

Key features:Quick and easy installationSuitable for a wide range of floor coverings500mm wide - perfect for installationDurable and toughConstructed using multi-strand wires The ProWarm 150w sticky mat system is suitable for use as a primary source of heat in a new build/well insulated home, or as a secondary source of heat in a poorly insulated property. We recommend carrying out a heat loss survey to guarantee the output will be sufficient. The ProWarm™ Electric Underfloor Heating Sticky Mat provides an effective and energy-efficient underfloor heating solution for heating your home, suitable for installation under tile, stone, ceramic or similar. Integrating easily as part of your existing fl…

150W/sqm Combymat heating mat for heating floating laminate and engineered board floors without the need for wet trade. For floors using carpet or luxury vinyl overlay boards can be installed on top of the heating system to allow those floor coverings to be laid. Installation is simple with the cut-and-turn system and the mat is suitable for primary and secondary heating in moderately well insulated rooms. Supplied with a 3m coldtail and earth shielded heating cable to comply with the 18th Edition, and covered by Heat Mat's Lifetime Warranty.

6mm Pro Range heating cable designed for covering with a 50mm screed for heating beneath nearly any floor covering. This loose cable is particularly suitable for new build and major renovation work where it is very quick to install and where the cable-to-cable distance can be varied as required. The cable spacing dictates the output of the system per square meter and with the correct output the cables can provide primary and secondary heating in even badly insulated rooms. Supplied with a 2m coldtail and robust 100% earth shielded heating cable and coldtail to comply with the 18th Edition, and covered by Heat Mat's Lifetime Warranty.

6mm Pro Range heating cable designed for covering with a 50mm screed for heating beneath nearly any floor covering. This loose cable is particularly suitable for new build and major renovation work where it is very quick to install and where the cable-to-cable distance can be varied as required. The cable spacing dictates the output of the system per square meter and with the correct output the cables can provide primary and secondary heating in even badly insulated rooms. Supplied with a 2m coldtail and robust 100% earth shielded heating cable and coldtail to comply with the 18th Edition, and covered by Heat Mat's Lifetime Warranty.

150W/sqm Combymat heating mat for heating floating laminate and engineered board floors without the need for wet trade. For floors using carpet or luxury vinyl overlay boards can be installed on top of the heating system to allow those floor coverings to be laid. Installation is simple with the cut-and-turn system and the mat is suitable for primary and secondary heating in moderately well insulated rooms. Supplied with a 3m coldtail and earth shielded heating cable to comply with the 18th Edition, and covered by Heat Mat's Lifetime Warranty.

3mm Pro Range heating cable supplied with fixing tapes for heating beneath nearly any floor covering. This loose cable is particularly suitable for very small or irregularly shaped rooms where the cable-to-cable distance can be varied as required. The cable spacing dictates the output of the system per square meter and with the correct output the cables can provide primary and secondary heating in even badly insulated rooms. Supplied with a 2m coldtail and robust 100% earth shielded heating cable and coldtail to comply with the 18th Edition, and covered by Heat Mat's Lifetime Warranty.

Key features:Quick and easy installationSuitable for a wide range of floor coverings500mm wide - perfect for installationDurable and toughConstructed using multi-strand wires The ProWarm 150w sticky mat system is suitable for use as a primary source of heat in a new build/well insulated home, or as a secondary source of heat in a poorly insulated property. We recommend carrying out a heat loss survey to guarantee the output will be sufficient. The ProWarm™ Electric Underfloor Heating Sticky Mat provides an effective and energy-efficient underfloor heating solution for heating your home, suitable for installation under tile, stone, ceramic or similar. Integrating easily as part of your existing fl…

6mm Pro Range heating cable designed for covering with a 50mm screed for heating beneath nearly any floor covering. This loose cable is particularly suitable for new build and major renovation work where it is very quick to install and where the cable-to-cable distance can be varied as required. The cable spacing dictates the output of the system per square meter and with the correct output the cables can provide primary and secondary heating in even badly insulated rooms. Supplied with a 2m coldtail and robust 100% earth shielded heating cable and coldtail to comply with the 18th Edition, and covered by Heat Mat's Lifetime Warranty.

The Ezewarm EzeMat underfloor heating system is suitable for most projects and is quick and easy to fit. It features a thin dual-fluoropolymer coated heating wire evenly spaced and taped to a glassfibre mesh with a pressure sensitive adhesive that can be repositioned easily without losing adhesion. The EzeMat is available in a choice of 160 W/m² and 200 W/m² heat outputs.