Chargers & Jump Starters

INTRODUCING THE CT PROCapable of multiple starts of over 28L diesel engines - Suitable for hauliers, plant, cv & psv workshops and many others who need to rely on their booster pack this winter. Easily move the pack around your workshop without worrying about injury 2000/1000 CRANKING AMPS – enough to start 28L diesel engines from completely flat 2 Year warranty on the whole pack & lifetime warranty on housing (excluding fuse) Curved clamps with LED in negative clamp

High efficiency diagnostic charger and tester for LiFePO4 / LFP batteries. Ideal for: LiFePO4 (LFP) 4s / 5s batteries from 2.5 – 120Ah. SAVE mode with BMS reset : starts from 0.5V with continuous monitoring / testing of charge acceptance or bad / shorted cell condition. Unnecessary (and unsafe) charging of a bad battery is prevented. CHARGING AMPS : 10A (AmpMatic) Included: Weatherproof battery lead & standard battery clip set

Product 1: Simple to connect and easy to use: Fully automatic, spark free, reverse polarity protected. Ambient temperature minus 20 degree Celsius to plus 50 degree Celsius Product 1: Tough and reliable: Designed for outdoor use at any temperature. Developed and tested in Sweden Product 1: Flexible: compatible with many different types of vehicle batteries Product 1: Maintains: ideal for carefree long-term maintenance charging Product 2: Compatible: CTEK MXS 3.6, MXS 5.0, MXS 5.0 Polar, MXS 5.0 Test&Charge Product 2: Tough: hardwearing silicone bumper, designed and tested in Sweden Product 2: Non-slip: Will help the charger grip on angled or slippery surfaces Product 2: Enhanced grip:

Ideal for motor bike, city cars, family cars, 4x4's, camper vans and vans. Suitable for 12V batteries with a battery capacity up to 160Ah (more than 98% of cars and vans)160 ah Optimized to maintain a high level of performance in any weather cold (“Cold charge” mode). And a practical 8 A “Power Supply” mode for maintaining an optimal charge on vehicles during wintering or demonstration. Total protection: against short circuits, polarity reversals and overloads Compact, lightweight design and sealed against dust and liquids (IP65) Advanced technology charger suitable for the latest Stop/Start vehicles Charging capacity from 15 to 160 Ah (240 Ah in charge maintenance) Fully automatic and inte…

The Clarke IBC7 is suitable for use with all types of 12V/24V lead acid batteries and can deliver up to 7A of charging. This unit also includes detachable ring terminals and detachable battery clamps fitted with an inline fuse for added usage.The IBC7 can be used as a constant DC 12V power supply and can also charge batteries up to 200Ah in size.

The Optimate 3 is a unique affordable 6-step 'all-in-one' 12V battery optimiser, totally automatic and fully protected against user errors. There are no switches and short-circuiting the charger output resets the program, without sparks or blown fuses. The Optimate 3 is affordable, compact, intelligent and forgiving of errors, making it the perfect tool for regular or long-term maintenance of batteries not in daily use. Designed to diagnose, recover, charge, test and optimally maintain automatically. The OptiMate 3 retains all the fully automatic, 100% safe, easy-to-use characteristics, of the 2 million OptiMates produced since 1995, but is now microprocessor-controlled, lighter and more

O-121 TM Style Connector, NOT SAE Version

Rugged 2mm thick black sheet metal hanger for your NJORD GO Offers easy access to the EVSE & neat cable storage Lockable with a padlock, easy to remove and carry with built-in handle Includes all of the required fixings Fit Type: Universal Fit

Features: 1.8m cable Suitable for 2.0Ah 3.0Ah 4.0Ah and 5.0Ah D20 batteries. D20 interchangeable battery system allows you to combine one battery with any of the tools within the D20 series.PTDDRPDIR55913

Steel case with carry handle this single phase charger features plenty of ventilation to help maintain low transformer temperatures. A large ammeter displays rate of charge and a dash-mounted fuse provides polarity protection in the event that clips are connected incorrectly. Rocker switches control variable output to the battery to maintain peak condition. Suitable for regular and low maintenance batteries.28A 12/24V Battery Charger• Steel case with a sturdy carry handle this single phase charger features good ventilation to help maintain low transformer temperatures.• A large ammeter displays rate of charge and a dash-mounted fuse provides polarity protection in the event of the

Bluetooth Smart - High efficiency - Also charges Li-ion (LiFePO?) batteries Adaptive 6-stage charge algorithm: test - bulk ? absorption - recondition ? float ? storage Storage Mode: less maintenance and aging when the battery is not in use NIGHT and LOW setting - Protected against overheating - Eleven LEDs for status indication Dimensions: 235H x 108W x 65D (mm) - Weight: 1.3 (kg) - Warranty: 5 Years

Compatible with AEG chargers: LM, LD, LI, LT 10/20 Cable length: 210 cm Diameter: 16 AWG For quick and easy connection

Designed for 12 V batteries from 1.2 to 32 ah CAN BUS compatibility for motorcycles equipped with a 12 V socket Protection of the vehicle’s on-board electronics Ultra-compact design, light and portable Maintains the charge of batteries up to 100 Ah Recovers even deeply discharged batteries (SOS Recovery) Fully automatic and intelligent charging curve in 7 stages (50 % faster than a traditional charger) Very compact, lightweight design and waterproof against dust and liquids (IP65) Total protection against short circuits, polarity reversals and overloads Delivered with clamps and terminals connection

Liquid crystal displayFor status monitoring and set-up Load outputOver-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. The connect and disconnect voltages are adjustable. Day/night timing of the load outputThis option allows for a pre-set ON-time after dusk. Programmable battery charge algorithmPreprogrammed algorithms for AGM, GEL, Flooded or LiFePO4 batteries (with internal BMS only). Made in: Netherlands Current: …

Motorcycle Battery Charger / Battery Charge / Protection Reverse Polarity / Length of Cable 150 cm / Protection Class IP67

Suitable for 6V and 12V lead-acid (SLI, Gel, EFB, AGM) and Li-ion batteries 6A charging power and up to 30% fast charging thanks to RF MCU control Real-time power monitoring and smart microprocessor technology for automatic voltage and current RPA22rerere0232023Precise and gentle charging with diagnostic, rescue and maintenance function and auto start function after power failure Compact housing with integrated LCD display, hook attachment, non-slip housing base and convenient 1-button operation. 1.5 metre cable, comfort plug and speed connect system for quick cable change. Power supply (power supply e.g. when changing batteries) and IP65 dust and water protection

Charging in 12 volt free mode: 2 A/14.4 V Charging in 12 V fast mode: 4 A / 14.4 V Charging in winter mode: 4 A / 14.7 V The device is equipped with protection against short circuit, overload and reverse polarity.