Chargers & Jump Starters

Motorcycle Battery Charger / Battery Charge / Protection Overheat Protection / Protection Class IP 65

Protect your GBX75 jump starter with a lightweight, crush-resistant, anti-shock, and weather-resistant case. Made from a rugged and durable EVA material with a soft melange velvet lining for a secure, scratch-free fit. Secure enclosure with a durable, precision steel-rimmed zipper, a built-in reinforced handle, and custom over-molded pull tabs. Portable carrying case design that's compact and lightweight and fits in most glove boxes or compartments. Customized to fit the GBX75 UltraSafe Lithium Jump Starter, plus included accessories.

The OptiMate 1 Duo Automatic Maintenance Charger is a cost effective 12V and Lithium Battery maintenance charger, providing you with more battery power for a longer battery life. Simply connect and forget.0.6A (constant current) charging AmpsIndoor use only - lowest temperature: -4°F / -20°CLow Volt Start of 4VSTD, AGM and GEL 12V batteries from 2 30Ah and Lithium (LiFePO4) 12.8/13.2V batteriesGlobal (100-240V 50-60Hz), high efficiency (CEC listed), fully sealed inputDust proof case with wall mounts, with 6ft / 180cmAC supply lead and 6ft/180cm charge lead ending in SAE connectorNo risk of overchargingTotally safe for vehicle electronicsSparks suppressedSafe for long-term battery

Jump Start Charger / Case

Especially for 12 V batteries from 1.2 to 32 ah, trickle charge up to 100 ah possible. suitable for motorcycles with a 12 V-can bus connection: it can be charged unguarded and safely without ignition key (cable optional). The charger allows restoration of deeply discharged batteries (SOS recovery). Protection against short circuit and overload as well as reverse polarity. An integrated temperature sensor prevents overheating of the internal electronics. Automatic switch-off when the battery is disconnected. Extremely compact design, lightweight and portable, connection with waterproof quick connection plug, completely dust and waterproof housing (IP65) and sturdy housing with wall brackets.…

Victron Energy Blue Smart IP22 12-Volt 30 amp 230V with 3 Output is the new professional battery charger with wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available The Blue Smart Charger features a microprocessor controlled adaptive battery management, The adaptive feature will automatically optimize the charging process relative to the way the battery is being used High efficiency and also Protected against overheating: With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard Also charges Li-ion batteries: Li-ion batteries are charged with a simple bulk …

CHARGE YOUR 12V BATTERY FROM ANOTHER 12V BATTERY! NO AC POWER REQUIRED!Recharge your trailered motorcycle, ATV or speed boat’s battery on the way to the venue! SAVE: Low Volt Start of 1V. CHARGING AMPS: 2A. Model TM-500 IDEAL FOR: STD, AGM & GEL 12V batteries from 3 – 96Ah. USE: Indoor / Outdoor (lowest temperature: -4°F / -20°C). STYLE: Weatherproof case with wall mounts, with 6ft / 180cm AC supply lead and 6ft / 180cm charge lead ending in SAE connector. Weatherproof battery lead, standard battery clip set & fused battery clip set included. INPUT: 12-16 V, 2.7A max,

Suitable for lithium iron phosphate 12 V batteries from 1.2 to 125 Ah, it can also be used for charging up to 170 Ah. 2 charging modes: (4 A): for charging small batteries from 1.2 Ah to 15 Ah. (6 A): for charging batteries from 15 Ah to 125 Ah. CAN bus compatibility for motorcycles with 12V connection: unattended and safe charging without ignition key (optional cable) UVP (low voltage protection) wake up function: reactivates a battery after deep discharge and automatically starts charging. The charger has a simple, error-safe user interface. Protection of vehicle electronics: protection against short circuits, reverse polarity and overload, anti-spark system. Auto standby when the battery …

The Sip Advanced Battery Charger Gx10 Is The Ultimate Tool For Charging Support And Diagnostics Combining Intelligent Charging Maintenance Supply Reconditioning And Testing In One Process. • 12V Output Voltage 10A Output Current • Energy-Efficient Charging For High Cost Savings • Multi-Step Microprocessor-Controlled Charging • Integrated Alternator And Battery Test Features • Automatic Maintenance Mode On All Batteries • Suitable For Atvs Motorcycles Cars Vans Boats And Trucks For High Versatility In All Applications • Perfect For Lead Acid; Agm Gel (+Ca-Ca) Wet Efb Start-Stop And All Lifepo4 Battery Types • Reconditioned Supply Test Lead Lithium Modes

Jump Leads / Length of Cable 300 cm / Portable

The Gunson 77115 maintenance battery charger is a fully automatic, microprocessor controlled unit delivering a maximum charge rate of 2A . It is suitable for 6 or 12V batteries with capacities between 10AH to 80AH. It is a maintenance battery charger and as such is not suitable for charging severely discharged batteries. It charges in three stages, initially pulse-charging to assist with battery desulphurisation (if necessary), then brings the battery up to 100% capacity. The final stage is a maintenance pulse charge (float mode) which will maintain the battery in a fully charged state without overcharging. It features short-circuit protection, overload current protection, and over voltage protection.…

Portable 12 Volt power pack with many uses. This high capacity compact, rechargeable jumpstart unit will go anywhere to start a car or operate lighting, recharge mobile phones (via a compatible in-car type charger), laptop computers, power tools, etc. Easily recharged from car or mains supply; all connectors and adaptors supplied.

Charging current A: 2.2 Input voltage, from V: 12 Input voltage, up to V: 24 Input voltage (s) V: 12-24

Victron Energy Blue Smart IP22 Charger 12 20 1 230V BPC122042022 Color : Blue Victron Energy