Chargers & Jump Starters

The Startronic 800 is a battery less booster pack designed for use on 12V vehicles. Equipped with super capacitors it draws residual voltage from a vehicle's flat battery to charge itself (in around 2 minutes) and is then able to boost start the engine. Recharging from the mains is not required but can also be charged via a cigarette lighter socket (approx 3mins). Able to provide up to 800Amps starting current, the Startronic 800 can be used to start both petrol & diesel cars and vans. Protection built in against short circuits & polarity reversal the batteryless technology means the unit is always operational even after years of storage unused & will function without loss of performance

Product 1: Protect your GENIUS1, GENIUS2, GENIUS5, and GENIUS10 charger with a lightweight, crush-resistant, anti-shock, and weather-resistant case. Product 1: Made from a rugged and durable EVA material with a soft melange velvet lining for a secure, scratch-free fit. Product 1: Secure enclosure with a durable, precision steel-rimmed zipper, a built-in reinforced handle, and custom over-molded pull tabs. Product 1: Portable carrying case design that's compact and lightweight and fits in most glove boxes or compartments. Product 2: Extend the reach of your battery charger and accessories. Add an additional 3-meters of length to any connection Product 2: Built-in 20A micro-blade fuse for

This special accessory plug lead allows connection to the 12V DIN accessory sockets fitted to some BMW, Ducati, Honda & Triumph motorcycles.Key Features - Black SAE Right Angle 0.15m- Length: 6 /15cm- 90° DIN connector- Industry standard 2-pin SAE connectorKey Features - Black SAE Right Angle 1m- Length: 40 /100cm- 90° DIN connector- Industry standard 2-pin SAE connectorKey Features - Black SAE 0.3m- Length: 12 /30cm- DIN connector- Industry standard 2-pin SAE connectorKey Features - Black SAE 1.2m- Length: 47 /120cm- DIN connector- Industry standard 2-pin SAE connectorKey Features - White TM- Length: 47 /120cm- White TM Connection- As found on Pre-2012 Optimate and Pre-2015 Accumate

Smart Battery Charger for 24v and 12v Batteries The HYSC-7000 is a SMART 230V car battery charger from Hyundai suitable for car batteries, motorbike, motorhomes, caravan leisure batteries and more Charge A Variety Of Batteries Designed for charging all types of 12V lead acid, 24V lead acid batteries AND 12v lithium-ion batteries, including WET (Flooded), MF (Maintenance-Free), EFB (Enhanced Flooded Battery), AGM (Absorbed Glass Mat), AGM+ and LIB (Lithium-Ion) batteries. It is suitable for charging battery capacities from 1.2 to 130 amp-hours and maintaining all battery sizes. Battery Repair Mode Extend the life of tired batteries with Repair Mode, an advanced battery recovery mode for

Up to 150 A peak current: for transmitting the charging current to start almost completely discharged batteries Up to 1.6 litres: suitable for starting vehicles with a petrol engine with up to 1.6 litres displacement 75A continuous current: for continuous current transmission and to protect against overheating, a continuous current of 75A is given Copper coated aluminium cable Cable length: 2.5 metres

Victron Energy Orion-Tr Smart 24/12-Volt 30 amp 360-Watt DC-DC Non-Isolated Charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth and IP43 protection Can be used in 12-Volt or 24-Volt systems and is suitable for both lead acid and lithium batteries, unlimited multiple units can be connected in parallel to increase output power With Bluetooth Smart enabled the unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch For use in dual battery systems in vehicles or on boats where the alternator and the start battery are used to charge the service battery Screw terminals: The screw terminals give the advantage of …

Ideal for: 12V lead-acid STD & AGM batteries from 3-240Ah and 12.8V/13.2V Lithium LFP (LiFePO4) batteries from 2-120Ah Charge mode for 12V lead-acid batteries, including wet and AGM Charge mode for 12.8V LiFePO4 (“Lithium” LFP) batteries Power Supply mode for battery support during vehicle diagnostics, tuning or troubleshooting

A mains powered 4A intelligent battery charger for use on 6V and 12V automotive batteries. Fully automatic, it features a 10-stage charging cycle which monitors the state of the battery and adjusts the charging output to suit. Automatically drops to a trickle charge of

With a heavy duty steel case and high power battery, the PowerStart emergency jump starter is ideal for starting vehicles up to 900hp. The heavy-duty copper cables provide efficient power transfer and the large easy to read battery indicator provides quick knowledge of the battery and its current state of charge. Completing the product, is on board spike and surge suppressing to provide safety and reduced risk of any damage to the vehicle.

Reliable, affordable, powerful

Victron Energy Smart IP43 24-Volt 25 amp 85-250V (3) features 3 isolated outputs (3 Bank) - All outputs can supply the full rated output current The Smart Charger features our well-known ‘adaptive’ battery management system that can be preset to suit different types of batteries. The ‘adaptive’ feature will automatically optimise the charge process relative to the way the battery is being used Bluetooth Smart enabled: Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available Automatic voltage compensation: The charger compensates for voltage drop over the DC cabling by slightly…

Product 1: Enables your car battery to be charged through a 12V cigarette socket Product 1: Compatible with all CTEK chargers up to 7A Product 1: Fits 12mm and 21mm sockets Product 1: Easy to fit and has a 60mm length cable Product 2: Easier connection: 2.5 metre cable, for connection to further away or hard to reach batteries Product 2: Tough & durable: hardwearing, flexible cables, designed and tested in Sweden Product 2: Secure: snug and safe connection via CTEK’s unique in-built connect system Product 2: Compatible: the Connect 2.5M Extension is designed for with CTEK chargers up to 10A output.

Designed for easy installation and low maintenance, the Bosch EV300 Level 2 AC Charging Station is a compact, yet powerful charger, providing 32A capacity and charging up to 4 times faster than with a standard EV cord EV300 is UL listed and tested to all applicable industry standards and built to be weather-resistant so, whether installed indoors or out, this charger will safely and reliably charge in rain, snow, sleet, ice - or in the comfort of your garage EV300 features simple, at-a-glance LED indicators that provide current charging status - readily visible from across the garage or driveway - for easy identification, a tamper resistant mounting bracket, and easy to manage 16 foot cable …

12V 8A Auto battery charger/maintainer - This vehicle charger automatically performs the charging function in 9 stages. The first 5 stages perform diagnostics and recovery depending on the condition of the battery. After recovery a bulk charge brings the- LED Selectable modes; Motorcycle car winter start Calcium and DC output- Suitable for 12V Lead Acid batteries- Also provides 12V output including SLA WET AGM VRLA and Lead calcium- Power supply mode provides a 12V supply for powering appl- Battery clamp connectors- Ring terminal lead - Auxiliary power (cigar lighter) adaptorPTDCLA6267025