Other Sound & Hi-Fi

Canon Easy Service Plan Installation service

Canon 4623B001AA

Very lightweight, low-profile ferrite magnet compression driver with power rating of 15 W RMS (30 W continuous) and nominal impedance of 8 Ohm. It utilizes the Finite Element Analysis (FEA) techniques used to optimise both magnetic and acoustic design and is ideal for entry-level two-way and three-way sound reinforcement cabinets. The driver is equipped with a 1” voice coil made of copper clad aluminium with PETP film diaphragm and surround material. It is supplied with partial phase plug assembly (for applications where outer phase plug and horn form single moulding as part of front baffle). Frequency range: 1.5 kHz-20 kHz. Sensitivity: 107 dB. Mounting information: width – 90 mm, depth – 52…

Hear every detail within the high frequencies of your sound. The Celestion CDX1-1430 compression driver has a 1.4 copper-clad aluminium voice coil with a neodymium magnet. Delivering an extended frequency response with detail and definition. Guaranteed to project your sound. Every delicate nuance is faithfully reproduced - from the crystal-clear highs to the well-defined midrange. The CDX1-1430 has a nominal impedance of 8 ohms and is capable of handling 50 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1430 is the perfect choice.

1" exit neodymium magnet compression driver.Maximum modal suppression phase plugDeep-drawn titanium diaphragm with polyamide surround1,500Hz recommended min. crossover freq (12dB/oct)
Made in: China
Тype: PA
Diameter: 1"
Impedance: 8 Ohm
Power RMS: 50 W
Power: 100 W
Power (Watt): 100.0
Power RMS (Watt): 50.0
Weight: 0,75 kg
Frequency Range: 800 Hz - 20 kHz
Magnet Type: Neodymium
Sensitivity: 107 dB
Diameter (inch): 1.0

Hear every detail within the high frequencies of your sound. The Celestion CDX1-1731 compression driver has a 1.75 copper-clad aluminium voice coil with a neodymium magnet. Delivering an extended frequency response with detail and definition. Guaranteed to project your sound. Every delicate nuance is faithfully reproduced - from the crystal-clear highs to the well-defined midrange. The CDX1-1731 has a nominal impedance of 8 ohms and is capable of handling 40 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1731 is the perfect choice.

Superb design and high build quality makes this well-established ferrite magnet compression driver ultra-reliable. Ideal as a drop-in replacement HF driver used with two-way and three-way cabs, CDX1-1745 provides 80 W continuous power handling (40W RMS AES standard) and 110 dB sensitivity. Features Celestion’s proprietary Sound Castle clamping system for greatly reduced distortion and increased lifespan.
Weight: 3,0 kg
Power (Watt): 80.0
Power RMS (Watt): 40.0
Frequency Range: 1200 Hz - 20 kHz
Magnet Type: Ferrite
Diameter (inch): 1.0
Sensitivity: 110 dB
Made in: China
Impedance: 16 Ohm
Тype: PA
Diameter: 1"
Power RMS: 40 W
Power: 80 W…

Hear every detail within the high frequencies of your sound. The Celestion CDX1-1745 compression driver has a 1.75 copper-clad aluminium voice coil with a ferrite magnet. Guaranteed to project your sound without sacrificing the quality. Designed to deliver an extended frequency response with pristine highs that complement well-defined low frequencies. The CDX1-1745 has a nominal impedance of 8 ohms and is capable of handling 40 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1745 is the perfect choice.

Hear every detail within the high frequencies of your sound. The Celestion CDX14-2420 compression driver has a 2.4 copper-clad aluminium voice coil with a neodymium magnet. Delivering an extended frequency response with detail and definition. Guaranteed to project your sound. Every delicate nuance is faithfully reproduced - from the crystal-clear highs to the well-defined midrange. The CDX14-2420 has a nominal impedance of 8 ohms and is capable of handling 70 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX14-2420 is the perfect choice.

Hear every detail within the high frequencies of your sound. The Celestion CDX14-3050 compression driver has a 3 copper-clad aluminium voice coil with a neodymium magnet. Delivering an extended frequency response with detail and definition. Guaranteed to project your sound. Every delicate nuance is faithfully reproduced - from the crystal-clear highs to the well-defined midrange. The CDX14-3050 has a nominal impedance of 8 ohms and is capable of handling 75 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX14-3050 is the perfect choice.

Bass your music deserves. The Celestion CF1840H 18 low frequency driver has a nominal impedance of 4 ohms and is capable of handling 1000 watts of continuous power. Designed specifically for subwoofers the CF1840H provides a narrow frequency range from 30Hz to 2500Hz. The Celestion CF1840H is constructed with a lightweight cast aluminium chassis. Providing structural integrity and ensuring minimal interference with the ferrite magnet. With a carbon-fibre loaded paper cone the 18 driver is able to fill large venues with incredibly deep bass responses.

Balanced and well-defined mids. The Celestion FTR08-2011D is an 8 mid-range driver with a 2 round copper voice coil and ferrite magnet. With a nominal impedance of 8 ohms and a 300 watt continuous power rating the FTR08-2011D faithfully reproduces every detail within the mid frequencies. The perfect choice for a three-way multi-driver speaker. The FTR08-2011D is constructed with a lightweight cast aluminium chassis. Providing structural integrity and ensuring minimal interference with the voice coils ferrite magnet. With a kevlar loaded paper cone the 8 driver is able to deliver superior acoustic performance. Easy to install using the four mounting slots this compact driver is designed to fit …

With 700 W continuous power handling (350W RMS AES standard), this robust, cast aluminium replacement driver has been designed for superior sound reinforcement. Purpose-built for mid/bass applications, it really comes into its own when used with compact 12” enclosures. The efficient, Finite Element Analysis-optimised magnet structure delivers high BL (magnetic flux) for a tight, controlled low end performance that delivers truly detailed, high-definition sound reproduction.
Sensitivity: 96 dB
Magnet Type: Ferrite
Power (Watt): 700.0
Power RMS (Watt): 350.0
Diameter (inch): 12.0
Made in: China
Power: 700 W
Impedance: 8 Ohm
Diameter: 12"
Тype: Speaker unit
Frequency Range: 40 Hz - 4 kHz…

6.5'' coaxial loudspeaker providing 150Wrms (AES standard) power handling and 92dB sensitivity. Full range frequency response: 110 – 20,000Hz. FEA (Finite Element Analysis) optimized ferrite magnet assembly acts as common motor for both LF and HF drivers resulting in enhanced coherence. Robust cast aluminum chassis is designed to minimize unwanted reflections, further reducing acoustic distortion. Demodulation ring reduces flux modulation, minimizing electromagnetic distortion. 2'' edgewound copper clad aluminum voice coil wound on high temperature glass fibre former. 100° nominal HF coverage.
Power RMS (Watt): 75.0
Power (Watt): 150.0
Тype: PA
Impedance: 8 Ohm
Made in: China
Power RMS: 75 W…

Outstanding full-range sound reproduction. The Celestion FTX0820 is a coaxial driver with a nominal impedance of 8 Ohms and a total of 240W RMS power handling. Offering clear and defined audio from 70Hz all the way up to 20kHz the FTX0820 is perfect for a wide variety of system applications. This high-performance driver features a coaxially-mounted 1.4 polyimide compression driver that utilises an FEA-optimised ferrite magnet assembly. This assembly acts as a common motor for the LF and the HF drivers for significantly improved coherence. The FTX0820 also features a demodulation ring that reduces flux modulation resulting in minimised electromagnetic distortion. With eight mounting slots in …

Outstanding full-range sound reproduction. The Celestion FTX1225 is a coaxial driver with a nominal impedance of 8 Ohms and a total of 360W RMS power handling. Offering clear and defined audio from 50Hz all the way up to 20kHz the FTX1225 is perfect for a wide variety of system applications. This high-performance driver features a coaxially-mounted 1.75 polyimide compression driver that utilises an FEA-optimised ferrite magnet assembly. This assembly acts as a common motor for the LF and the HF drivers for significantly improved coherence. The FTX1225 also features a demodulation ring that reduces flux modulation resulting in minimised electromagnetic distortion. With eight mounting slots …

Versatile 12 twin-cone design. The Celestion K12H-100TC boasts a nominal impedance of 8 Ohms and 100W RMS power handling. With an extended frequency response ranging from 50Hz all the way up to 10kHz the K12H-100TC is perfect for a wide variety of system applications. The K12H-100TC boasts a 1.41kg ferrite magnet and a 1.75 high-temperature copper voice coil for exceptional reliability and performance. Reliability is further increased with an optimised cone neck/voice coil assembly as well as minimising high-frequency distortion and providing improved overall sound quality. The secondary cone is terminated by a pressure-formed cloth dust cap to enhance the clarity of the mid-band whilst a double-roll …

Versatile 12 twin-cone design. The Celestion K12H-200TC is a 12 boasts a nominal impedance of 8 Ohms and 200W RMS power handling. With an extended frequency response ranging from 50Hz all the way up to 10kHz the K12H-200TC is perfect for a wide variety of system applications. The K12H-200TC boasts a 1.41kg ferrite magnet and a 2 high-temperature copper voice coil for exceptional reliability and performance. Reliability is further increased with an optimised cone neck/voice coil assembly as well as minimising high-frequency distortion and providing improved overall sound quality. The secondary cone is terminated by a pressure-formed cloth dust cap to enhance the clarity of the mid-band whilst …

Mids as they were meant to be heard. The Celestion TF0510MR is a 5 mid-range driver with a nominal impedance of 8 Ohms and a 30W RMS power rating. With the ability to reproduce mid frequencies with outstanding clarity and detail the TF0510MR is the perfect choice for a three-way multi-driver speaker system. The closed-back design prevents your low-frequency drivers backwave radiation from affecting the TF0510MRs motion eliminating the need for a separate mid-range enclosure in your cabinet. The pressed steel chassis and kevlar-loaded paper cone ensure your driver is well-protected and reliable whilst simultaneously delivering excellent acoustic performance. Easy to install using the four mounting …

6” mid-range driver with nominal impedance of 8 Ohm that provides 95 dB sensitivity and 100W RMS power rating (200 W continuous), ideal for two-way systems. It achieves optimal performance in compact enclosures. It features a 1.5” high temperature copper voice coil wound on polyimide former for increased reliability, vented ferrite magnet assembly for enhanced cooling and rigid pressed steel chassis design for maximum energy transfer. It is also equipped with a single suspension, polyimide former and Kevlar loaded paper cone with cloth sealed surroundings. Frequency range: 85 Hz-6 kHz. Overall diameter: 178 mm. Overall depth: 74 mm. Cut-out diameter: 147 mm. Weight: 1.4 kg.
Power RMS: 100 W…

Mids as they were meant to be heard. The Celestion TF0615MR is a 6 mid-range driver with a nominal impedance of 8 Ohms and a 50W RMS power rating. With the ability to reproduce mid frequencies with outstanding clarity and detail the TF0615MR is the perfect choice for a three-way multi-driver speaker system. The closed-back design prevents your low-frequency drivers backwave radiation from affecting the TF0615MRs motion eliminating the need for a separate mid-range enclosure in your cabinet. The pressed steel chassis and kevlar-loaded paper cone ensure your driver is well-protected and reliable whilst simultaneously delivering excellent acoustic performance. Easy to install using the four mounting …

Class-leading bass reproduction. The Celestion TF1830 is an 18 low frequency driver with a nominal impedance of 4 Ohms and a 500W RMS power rating. Perfect for subwoofer driver replacements upgrades or building your own custom cab the TF1830 boasts a frequency range of 35Hz all the way up to 1000Hz. Balanced Airflow Venting provides enhanced cooling for the TF1830. The drivers cone is crafted from glass-loaded paper with weather-resistant impregnation. Combined with a pressed steel chassis your TF1830 is designed to remain protected and reliable whilst delivering outstanding acoustic performance. With eight mounting slots the Celestion TF1830 is easy to install in cut-outs measuring 16.57.…

CEP 1003940511 desk tray/organizer Polystyrene (PS) Multicolour

Ingeniously designed this magnetic pencil cup will enable you to always have at hand board markers and small office supplies.
Ideal for magnetic whiteboards and flat metallic surfaces. Not suitable for use on magnetic glass boards.
The back equipped with a magnet can support up to 300 g.
Capacity: 8 whiteboard markers/1 remote control/1 pad of Post-It...
Overall dim: 78 x 74 H 95 mm.
100% recyclable high quality plastic PS.