Other Sound & Hi-Fi

Special original DPA microdot to TA-4F Switchcraft adapter that connects the DPA's d:fine line of headset microphones, the d:screet series of miniature microphones as well as the d:vote range of instrument microphones to adapter for Shure, TOA, PGXI and Line 6 wireless systems, providing flexible, simple and affordable possibilities.
Made in: Denmark

Adapter for powering Miniature Microphones via standard P48 phantom power. Designed for use with miniature microphones from DPA. Belt clip is included. This adapter is active-signal balanced, which improves suppression of induced electromagnetic noise. Common Mode Rejection Ratio (CMRR) is better than 60 dB from 50 Hz to 15 kHz. The adapter is functional at 12 V phantom power but needs 48 V ±4 V to reach full specifications. The adapters for wireless systems give you flexible, simple and affordable possibilities. You are no longer bound to one wireless system. As circumstances change, you can just switch your adapter, instead of incurring the cost of a whole new microphone. And when you make t…

Microphone Pre-Amp / 19 Inch Size / Processor Type Equalizer / Number of Channels 2 / Rack Height 2 RU

Drawmer 1973 3 Band Stereo FET Compressor is a new affordable and dynamic unit designed with a culmination of 30 years of development and experience. The Drawmer 1973 3 Band Stereo FET Compressor combines the functionality and control of the world class Drawmer S3 with the familiarity and quality of the illustrious 1960 and 1968 providing three bands of transparent intuitive compression for the price of a conventional single full band compressor.

Signal Processor / 19 Inch Size / Effects Equalizer

Signal Processor / 19 Inch Size

The Drawmer CMC3 Compact Monitor Controller combines the compact design of the CMC2 with the high-end audio quality of the MC2.1 to deliver this powerful controller for your studio monitors. Designed for precision the CMC3 features a wide range of connections including four stereo inputs as well as a SPDIF digital input. You can connect up to three sets of stereo monitors with an additional control for a subwoofer output. You can listen to multiple studio monitors simultaneously or switch between them for checking mixes. Basing its circuit design on the MC2.1 the CMC3 delivers unparalleled audio fidelity resulting in transparent and ultra-accurate sound reproduction. Dial in your volume with …

DrayTek G2540xs Managed Gigabit Ethernet (10/100/1000) 1U Black

Draytek Vigor 2832 wired router Gigabit Ethernet White

DrayTek VigorSwitch G2282x L2+ Managed 24-Port Gigabit Switch with 4 x 10GbE SFP+ Ports and Power Backup Input

Draytek P1282 Managed Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) 1U Black

Signal switch pedal from MXR. The A/B Box allows you to route your instrument's signal to two separate output amp paths. Use it to switch between amps or run them both at the same time with different effect configurations so you can find your ultimate sound. Use the Thru jack to connect to a tuner, amp or other device that you want to receive a constant signal. The A/B Box comes in a heavy-duty die-cast housing with high quality jacks and switches.
UK/EU Power supply included: No
Battery Operation: Yes
Power Supply: Adapter or Battery
Battery Type: 9V
Made in: USA

The MXR Tap Tempo switch features adjustable tip/ring configuration so you can control the delay time of a wide variety of delay pedal types. This pint-sized footswitch is ruggedly built for a lifetime on the road.
Battery Operation: No
UK/EU Power supply included: No
Made in: USA
Power Supply: Passive

The MXR Iso-Brick Pro Power Supply is designed to deliver clean, steady voltages to a diverse range of pedal types, allowing you to confidently power your entire pedalboard without any extra bulk.Power Outputs:Fully Isolated Outputs: Each of the Iso-Brick Pro’s outputs is fully isolated to preserve signal purity and eliminate environmental noise.Fixed Outputs:Two 9V DC outputs at 500mA each.Four 9V DC outputs at 300mA each.Switchable Outputs:Two switchable outputs that can be set to 9V, 12V, or 18V DC at 500mA.Dedicated 9V DC output at 1.5A for high-demand multi-effects units like the Line 6 HX Effects processor and HX Stomp amp/processor.18V DC link output at 2.0A for connecting to a secondary po…

Durable 893323 holder Passive holder Tablet/UMPC Silver

Durable 508158 monitor mount / stand Charcoal Desk

Durable 508201 monitor mount accessory

Durable 509623 monitor mount / stand 81.3 cm (32") Clamp Silver

Durable 509723 monitor mount / stand 81.3 cm (32") Clamp Silver

Durable TWIST Active holder Mobile phone/Smartphone, Tablet/UMPC Black

Durable Tablet holder Passive holder Tablet/UMPC Silver

Durable 893223 holder Passive holder Tablet/UMPC, Telephone Silver

Durable 893523 holder Tablet/UMPC Silver Passive holder

Durable VARICOLOR 10