Drill Chucks 13 mm

Tough viscous Wera bits bits for Phillips screws and universal use. 5/16" hexagon, suitable for holders as per DIN ISO 1173-D 8. Features and Benefits • For Phillips screws • Ductile and tough for hard materials • 5/16" hexagon drive (Wera connecting series 2) Contents 851/2 Z bits, PH 2 x 32 mm

Tough viscous Wera bits bits for Phillips screws and universal use. 5/16" hexagon, suitable for holders as per DIN ISO 1173-D 8. Features and Benefits • For Phillips screws • Ductile and tough for hard materials • 5/16" hexagon drive (Wera connecting series 2) Contents 851/2 Z bits, PH 1 x 32 mm

Tough viscous Wera bits bits for Phillips screws and universal use. 5/16" hexagon, suitable for holders as per DIN ISO 1173-D 8. Features and Benefits • For Phillips screws • Ductile and tough for hard materials • 5/16" hexagon drive (Wera connecting series 2) Contents 851/2 Z bits, PH 4 x 32 mm

Tough viscous Wera bits bits for Phillips screws and universal use. 5/16" hexagon, suitable for holders as per DIN ISO 1173-D 8. Features and Benefits • For Phillips screws • Ductile and tough for hard materials • 5/16" hexagon drive (Wera connecting series 2) Contents 851/2 Z bits, PH 3 x 32 mm

Fast Drilling in Metal - The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron and plastics. It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers. There is a low risk of breakage, especially for drill bits below …

Fast Drilling in Metal - The HSS Twist Drill Bit PointTeQ enables fast drilling in metal due to its PointTeQ tip design. Quick and easy drilling starts are possible as the self-centering tip prevents wandering. Because of its increased drilling rate, less heat and wear are generated. The PointTeQ tip design remains sharp and ensures continuous durability. This bit is suitable for drilling clearance and pilot holes in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron and plastics. It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers. There is a low risk of breakage, especially for drill bits below …

Core drill made of heavy-duty high speed steel. Suitable for steel (such as T-brackets, large sheets), cast iron, non-ferrous and light metals.For use in magnetic-stand and pillar drilling machines with morse taper retainer. In connection with RUKO arbor holders no. 108 302 / 108 303, with RUKO EasyLock no. 108 312 / 108 313 or a weldon direct shank such as the RUKO magnetic-stand A10 drill.Specifications: - Ø: 13,0 mm- Total length: L1 63,0 mm- Shank Ø: 19,0 mm- for machines: A10 / RU25 / RU40- Material: HSS- Surface: Bright- Cutting direction: right hand cut- Shank: Weldon shank- Cutting: depth 30,0 mm- Weight: 0,07000 KG

Forstner Bits / 1 Piece / 12.7 mm Drill Diameter

Bit Holder / 1 Piece / Metal

• SUITABLE - for both 10mm and 13mm chucks. • WIDE USE - Fits most compatible Sealey and other leading branded tools. • SUITABLE FOR - Fixed, Corded and Cordless drills. • EASY USE - Featuring T handle for easy use. Suitable for both 10mm and 13mm chucks. Fits most compatible Sealey and other leading brands chucks. Ideal for Fixed, Corded and Cordless drills. Featuring T handle for easy use.

Crafted to fit chucks with a 13mm size, this chuck key is a versatile addition to your toolkit. The robust construction of the key facilitates efficient tightening and loosening of drill bits, providing a reliable solution for your drilling needs. The ergonomic design of the key offers a comfortable grip, enhancing user control during drilling operations. Features & Benefits • Fits drills with 13mm keyed chucks

Crafted to fit chucks within the 10-13mm size range, this chuck key is a versatile addition to your toolkit. The durable construction of the key facilitates efficient tightening and loosening of drill bits, providing a reliable solution for your drilling needs. The ergonomic design of the key offers a comfortable grip, enhancing user control during drilling operations. Features & Benefits • Fits drills with 10-13mm keyed chucks

Makita Impact Black Socket Adaptors let you use sockets in an impact driver or drill driver. The black coating is to prevent rusting and corrosion and so increasing durability for a longer life than that of standard bits. Specifications • Makita Part Number: B-66874 • Shank: 1/4" Hex • Square Drive: 1/2" • Length: 50mm Features & Benefits • Black coating to prevent rusting and corrosion • High durability with a longer life than standard bits • Impact rated meaning they are suitable for use in impact drivers • Works well with 25mm and 50mm Impact Black screw bits

Keyless Chuck for use on mains powered, cordless drills and drill drivers. Quick and easy to use, this chuck can be operated by hand for fast bit changes and features a non-slip locking system.

Faithfull heavy-Duty keyed chuck for use on both Rotary and Impact drills. Fitted with an anti-thrust bearing to increase the amount of grip and to prevent slipping when under load. Designed in accordance to DIN 6349The FAICHUCK12 comes complete with key and adaptor for use with SDS and SDS Plus machines.When used with SDS machines, the drill MUST NOT be used in hammer mode1/2in x 20 UNF thread. Capacity 13mmComplete with chuck key.Additional Information:• Chuck Type: Chuck & Key• Keyed/Keyless: Keyed

Adapter for Sockets - Looking for a quick solution to use sockets without an impact wrench? Try this Adapter for Sockets. It features a square drive with a 1/4" hex shank allowing you to connect sockets to your drill driver or impact driver. Use this Adapter for Sockets when you need to secure and remove fastners, such as bolts and nuts, using your drill or impact driver. It features a square drive, which acceptes square impact sockets and a pin locking mechanism to secure them in place. For heavier applications, such as wheel changing, we recommend using Bosch sockets with an impact wrench. 1/4” Hex shank for use with three-jaw drill driver chucks and hexagonal drill driver chucks. Features an…

Heavy duty steel drill chuck with knurled grips and black finish. Suitable for use with mains powered and cordless machines. Keyless mechanism for quick & easy accessory changes.

The most popular drill chuck for portable power tools.Not suitable for hammer action.Chuck has a through hole to accept a left handed retaining screw on a reversing drill.1.5 - 13mm Chuck Drill Size Range1 /2" x 20 Unf Female inturnal Mount

DeWalt DT7002 1/2" Keyless Drill Chuck. Features & Benefits • Drilling accessory • Includes chuck key Specifications • Manufacturer Code: DT7002-QZ • Diameter: 13mm

For use with most manufacturers rotary and hammer drills. Carton packed.

Keyless chuck for use on mains powered, cordless drills and drill drivers. Quick and easy to use, this chuck can be operated by hand for fast bit changes. The all steel construction provides a long working life making this chuck ideal for use on professional hammer drills. The chuck also features a non-slip locking system for impact drilling and holesaw applications1/2in x 20 UNF thread.Heavy-duty all steel constructionJaw locking system for hammer useAdditional Information:• Chuck Type: Chuck• Keyed/Keyless: Keyless

Keyed chucks up to 16 mm Features and Benefits • Replacement key 1 607 950 045 Specifications Chuck capacity: 1.5–13.0mm Mount, range: 1/2" – 20 Drill chuck, type: Bosch system chucks

With a 13mm capacity and 1/2" x 20 UNF thread, this reversible chuck accommodates a wide range of drill bits, making it a versatile addition to your toolkit. The inclusion of a key ensures easy and secure bit changes, enhancing overall convenience during your drilling tasks. The reversible feature allows you to switch between forward and reverse rotation, providing optimal control and manoeuvrability. Whether you're driving screws or drilling holes, this feature ensures efficiency and ease of use, reducing the need for manual repositioning. The compatibility of the 13mm Reversible Chuck with SDS+ Adaptor expands its versatility, allowing seamless integration with SDS+ rotary hammers. Features …

Secure Drill Bit Clamping - The Keyed Drill Chuck is a simple and reliable solution for fixing drill bits for any type of job. It provides a consistently strong clamping force that securely fastens cylindrical or hex shank drill bits. Its jaws are conveniently tightened and loosened with a key, making it easy to handle. Keyed drill chucks are available with different mounts (1/2" - 20, 3/8"- 24, 5/8" - 16, B16, and SDS plus), for a wide range of capacities and are compatible with most common drills. Check technical details for information regarding impact resistance or suitability for anti-clockwise rotation. Features and Benefits • Secure Drill Bit Clamping for Any Job • Keyed Drill …