Drill Chucks 16 mm

The Irwin Blue Groove 6X drill bits are ideal for drilling wood and offer 6x faster drilling penetration than a standard flat bit. Their 'Tri-Flute' design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal break out and the tapered flute reduces binding. The drill bits are also heat treated for extra durability.Diameter : 16 mm.Length : 165 mm.

2x Longer Lifetime - The BiM Progressor Hole Saw offers 2x longer lifetime than its predecessor. It has been redesigned with Bosch Bi-Metal with 8% cobalt alloy for increased durability. Additionally, it has an enhanced progressive tooth strip that enables faster cuts. Use this hole saw when drilling holes in wood, drywall, plastics, metal, non-ferrous metal and stainless steel. It is suitable for use with all corded and cordless drill drivers. For use with the Bosch Power Change Plus keyless arbor: offering accuracy and robustness. Features and Benefits • Long Life • BiM Progressor Hole Saw offers 2x longer lifetime than predecessor • Redesigned with Bi-Metal with 8% cobalt …

Excellent Lifetime - The Forstner Bit delivers excellent lifetime for drilling accurate-fit holes. Its toothed-edge design creates less friction and heat for increased durability. The precision drill bit's short centring tip has two main and one periphery (toothed-edge) cutting edges for spot-on results. Equipped with large chip-free zones, which allow for optimised chip removal, the bit's fast drilling accuracy is further supported. It enables the smooth splinter-free drilling of blind holes as well as edge and slant drilling, e.g. fixing hinges, dowelling and the removal of knotholes. Use when drilling in soft and hard wood, veneered wood and non-laminated chipboard. It is intended for use …

High-performance ground standard twist drill made from heavy-duty high speed steel. The fully ground twist drill has a precise concentricity. Thanks to the split point, this drill has good centring properties and requires little pressure. Ideally suitable for drilling larger drilling diameters on all commonly-used drilling machines with a clamping chuck up to 13,0 mm.Specifications: - Ø: 16,0 mm- Total length L1: 178,0 mm- DIN: 338- Material: HSS-G- Surface: bright- Cutting direction: right hand cutting- Shank: reduced- Drilling depth 5 x D- Point cut Shape C: Split point- Point angle: 118°- Helix angle: 25-30°- Tolerance: h8- Profile of flute: normal- Core: normal- Weight: 0,19000 KG

Powerful right-hand cutting high-performance drill with distinctive heat resistance. Ideal for drilling high-strength stainless, acid-resistant and heat-resistant steel. Ideally suitable for drilling larger drilling diameters on all commonly-used drilling machines with a clamping chuck up to 13,0 mm.Specifications:- Ø : 16,0 mm- Total length L1: 178,0 mm- DIN: 338- Material: HSSE-Co 5- Cutting direction: right hand cutting- Shank: reduced- Drilling depth: 5 x D- Point cut Shape C: Split point- Point angle: 130°- Helix angle: 25-30°- Tolerance: h8- Profile of flute: Normal- Core: Normal- Weight: 0,19000 KG

Forstner Bits / 1 Piece / 15.88 mm Drill Diameter

For use in magnetic-stand and pillar drilling machines with morse taper retainer. In connection with RUKO arbor holders no. 108 302 / 108 303, with RUKO EasyLock no. 108 312 / 108 313 or a weldon direct shank such as the RUKO magnetic-stand A10 drill.Core drills made of cobalt alloyed heavy-duty high speed steel with increased heat resistance. Ideal for drilling materials that are difficult to cut and for the highest demands. Suitable for working with unalloyed and alloyed steel (up to a strength of 1200 N/mm²), hot and cold-working steel and also for reinforced and case-hardened steel.Specifications:- Ø: 16,0 mm- Total length L1: 63,0 mm- Shank: Ø 19,0 mm- for machines: A10 / RU25 / RU40- Mat…

Depth 55mm. Cbn Grinding. For Magnetic Base Drill Presses And Foot Drills With Morse Taper Connection, Using Adapter 108 302 / 108 303. (Ruko Drills Rs 20, Rs 30). Suitable For Drilling Beams And Sheets Of Steel, Cast Steel, Light And Non-Ferrous Metals. Great Cutting Power And Long Life. Translucent Plastic Case With Hanger.Specifications: - Ø (Mm): 16- Ø Stem (Mm): 19- Number Of Teeth: 5

Features & Benefits: • Model No. S3 Specifications: Model No S3 Brand: Sealey Nett Weight: 0.067kg

For use in magnetic-stand and pillar drilling machines with morse taper retainer. In connection with RUKO arbor holders no. 108 302 / 108 303, with RUKO EasyLock no. 108 312 / 108 313 or a weldon direct shank such as the RUKO magnetic-stand A10 drill.Specifications:- Ø: 16,0 mm- Total length L1: 63,0 mm- Shank: Ø 19,0 mm- For machines: A10 / RU25 / RU40- Material: HSS- Cutting: direction right hand cut- Shank: Weldon shank- Cutting depth: 30,0 mm

16mm Bormax 2.0 Metric Forstner Bit, 1622016 Premium quality,unique design disperses wood chips when drilling , Very accurate , Wave profile ensures no scortching of the hole. Rapid drilling in soft wood, European hard wood, chipboard, MDF etc. Rapid chipping of solid wood and chipboard. Less effort is needed for drilling., 1622, 162201600

Use with morticing machines to cut square holes. Contains 6, 10, 13 and 16mm chisels. High carbon hardened and tempered steel. Finely ground and polished with honed edges.

• High carbon steel 16mm chuck and B16 arbor.• Suitable for Model No's GDM50B - GDM200F (Except GDM180B).High carbon steel 16mm chuck and B16 arbor. Suitable for Model No's GDM50B - GDM200F (Except GDM180B). Hand tightening of chuck collar grips drill bit securely with three high carbon steel jaws.• High carbon steel 16mm chuck and B16 arbor. • Suitable for Model No's GDM50B - GDM200F (Except GDM180B). • Model No. GDMX/KCTechnical Specification:Application(s): GDM Series Pillar Drills (GDM50B - GDM200F [Except GDM180B])Chuck Capacity: 16mmNett Weight: 0.83kgDimensions: Length: 55mm x Height: 53mmWeight: 0.857KgWarranty: 1 year

1.5/8" Bormax 2.0 Imperial Forstner Bit, 1622235 Premium quality,unique design disperses wood chips when drilling , Very accurate , Wave profile ensures no scortching of the hole. Rapid drilling in soft wood, European hard wood, chipboard, MDF etc. Rapid chipping of solid wood and chipboard. Less effort is needed for drilling., 1622, 162223500

• Suitable for PDM Series drilling machines with a JT3 arbor.Suitable for PDM Series drilling machines with a JT3 arbor.• Suitable for PDM Series drilling machines with a JT3 arbor. • Model No. PDM/KCTechnical Specification:Application(s): PDM Series Pillar DrillsChuck Capacity: 16mmNett Weight: 0.83kgDimensions: Length: 99mm x Height: 50mmWeight: 0.86KgWarranty: 1 year

Prima I Key Type Drill Chuck Impact-resistant key-type drill chuck. Conical/threaded mount with DIN ISO 10887 (toothing in acc. with DIN 6349). Prima I for use on stationary drills and machine tools Features For clockwise and counterclockwise rotation. Thread or taper mount for maximum drive force and precision Increased clamping force due to proven transmission principle from sprocket and drill chuck key Universally applicable for stationary box column drills, machine tools High concentricity of up to 0.15 mm

SUPRA-I Heavy industrial drill chucks for drilling machines and and-operated drills Features Rapid clamping and releasing of the drilling Tools without key. Self-clamping flat jaw drill chuck with metal sleeve. Highest concentricity of up to 0.12 mm Increase in the clamping force proportional to the cutting force by the automatic re-clamping function Easy and quick clamping of tools Strong retaining ring Functional components made from steel

1 x Mill Chuck Set, MT3 - M12 Diameter, 4 - 16mm