Guitar Accessories

Genuine Fender three-ply black pickguard for Telecaster electric guitar models that features eight countersunk pickguard screw holes around the perimeter of the pickguard. There are also two very small holes for mounting chrome-covered classic Telecaster rhythm pickup.
Original Colour by Producer: Black
Made in: USA

Three-saddle chrome bridge assembly for use on vintage-style Telecaster guitars. Mounting hardware is included.
Тype: Electric
Made in: USA
Original Colour by Producer: Chrome
Suitable for: Telecaster
Colour: Chrome
Number of Strings: 6
Material: Steel

The “cut” 3-saddle top-load/string-through Tele bridge delivers classic Tele tone and feel with a stylishly sleek silhouette and flexible setup options allowing you to tailor the tension and tone of each string to your liking. The American Pro II Telecaster Deluxe bridge sports a svelte “cut” design with compensated brass barrel saddles, accurate intonation and vintage-informed tone. Strings can be top-loaded for reduced tension, resulting in a mellower twang and springy attack that’s perfect for rock n roll.
Package Quantity (pcs): 1
Number of Strings: 6
Colour: Chrome
Made in: USA
Package Contents: Hex Key;Screws
Тype: Telecaster
Material: Brass

The top-load/string-through Telecaster bridge with compensated “bullet” saddles is our most comfortable, flexible Tele bridge yet – retaining classic brass-saddle tone and providing excellent intonation and flexible setup options, allowing you to tailor the tension and tone of each string to your liking. The compensated “bullet” brass barrel saddles are rounded off on the sides for comfort while providing accurate intonation and vintage-informed tone. Strings can be top-loaded for reduced tension, resulting in a mellower twang and springy attack that’s perfect for rock n roll.
Colour: Chrome
Number of Strings: 6
Package Quantity (pcs): 1
Handedness: Right …

4-bolt guitar neck plate from American series with “Fender Corona California” stamp that fits most of Fender guitars and bass guitars requiring a 4-bolt neck mount with Micro-Tilt adjustment. Plate is made of chrome with hole for neck tilt adjustment, and does not have serial number. Mounting hardware included.Measurements: 56mm x 38mm center to center mounting holes
Colour: Chrome
Made in: USA

This Fender replacement neck plate is a 70s vintage-style four-bolt mount neck plate with an engraved "F" logo and a chrome finish. It fits most Fender guitars and basses that require a four-bolt neck mount without Micro-Tilt adjustment.

Genuine Fender 4-way switch for Telecaster guitar that allows user to change the Telecaster pickup wiring from series to parallel for increased output and a fatter tone with the flick of a switch. It comes with mounting screws, 50’s style round switch tip, and wiring diagram.
Package Quantity (pcs): 1
Made in: USA
Colour: Black
Switch: 4 Way

There’s no denying the allure of a roasted maple neck. Resistant to humidity shifts and featuring a gorgeous, dark look, they have more sustain and add a unique note to the instrument’s voice. This roasted maple Modified Esquire neck has the back shape of an early 50’s Esquire but with a flatter fingerboard radius and larger frets for modern playability. Fender replacement necks are made at Fender manufacturing facilities to the same specifications as those used on Fender instruments. This Ensenada, Mexico-made Esquire neck features a maple fingerboard, a 9.5” radius and 22 narrow tall frets. The one-piece roasted maple neck has a thick early 50’s “U” …

Gold anodized pickguard, designed for Fender '58 Precision Bass. It has 10 holes, thumb rest hole and pickup cover holes. It is compatible with most modern Precision type basses. It is not compatible with the five-string models, left-handed models and American Deluxe models. Colour: Gold.
Original Colour by Producer: Gold
Number of Holes: 17
Тype: Precision Bass
Made in: USA

The Fender 5-Position - 4 Pole Stratocaster/Telecaster Pickup Selector will give you the crisp seamless switching that Fender is known for. It features a standard 5-way switch on one side and a "super switch" blade on the other making it ideal for American Pro Elite and Ultra HSS Stratocaster models. With one white and one black switch tip you can accessorise your style while the included mounting hardware means you can easily install it to your guitar straight away.

5-position pickup switch for Telecaster and Stratocaster guitars that comes with one white Stratocaster switch tip and one black barrel-style Telecaster switch tip. It is used on American made Fat & Double Fat Stratocaster and the Nashville Telecaster models, and is great for 4-conductor wired pickups.
Colour: Black;White
Switch: 5 Way
Made in: Mexico
Package Quantity (pcs): 1

Stratocaster Neck is well-suited to any playing style. Designed for speed and comfort, this neck sports the player´s favourite "C" neck profile, which, thanks to its classic and comfortable shape, offers a natural fret-hand feel. Other features include a 7,25"-radius, pau ferro fingerboard, 21 vintage style frets, synthetic bone nut and a gloss urethane finish on the back.
Handedness: Right Handed
Fretboard: Pau Ferro
Neck Profile: C
Fretboard Inlays: White Dot
Made in: Mexico
Fingerboard Radius: 7,25"
Neck: Maple
Number of Frets: 21
Colour: Natural
Scale (mm): 648.0
Variant: Stratocaster
Тype: Stratocaster
Frets Size: Vintage
Finish: Gloss
Nut: Synthetic Bone
Nut Width (mm): 42.0…

This Fender six-saddle hardtail bridge assembly is used on Classic and Pawn Shop series instruments and includes six stamped saddles intonation screws springs and saddle height adjustment screws. It does not include bridge mounting screws.

The Fender 6-Saddle Vintage-Style Telecaster Bridge Assembly is the perfect way to get that classic Fender tone. This bridge is designed for string-through bodies on the American Vintage series and Deluxe Nashville Telecaster guitars. With its six individually adjustable saddles and chrome finish this assembly will provide an authentic vintage look and feel while also delivering a warm open sound. This bridge assembly offers exceptional playability with its smooth string action and precise intonation. Thanks to the included mounting hardware and adjustment wrench installation is effortless so you can get your guitar up and running in no time. Whether youre a seasoned musician or just starting …

These high-quality 70s style Fender tuning machines are finished in chrome with the "F" logo and come supplied with mounting hardware. They fit American Vintage and Classic Series models but will not retrofit to American Standard American Deluxe or Standard Series models.

Specially voiced to reproduce the authentic sound of a vintage 1954 Stratocaster®, the 70th Anniversary 1954 Single-Coil Strat® pickups are full of the woody warmth and bell-like, crystalline tone that made Fender instruments famous. Their low-output design features authentic touches including beveled alnico 3 magnets, cloth-covered wire and vintage-correct shaped covers with softer top-corner radius. The 70th Anniversary 1954 Strat® pickups conjure authentic tones that sparkle and bark when pushed.
Тype: Single Coil
Wiring: 2 pole
Series: Pure Vintage
DC Resistance: 5,8 kOhm
Impedance: 5,8 kOhm
Compatible with: Stratocaster
Pickups: Passive
Position: Bridge/Middle/Neck
Original C…

The Fender 72 Telecaster Custom Knobs (4) are replacement parts specifically for the Mexico-made 72 Telecaster Custom. They include all mounting set screws youll need to install them and should fit the majority of 250k 1/4" pots if youre looking to give another guitar some tasty Tele style. Includes two volume and two tone knobs in the classic style each numbered from 1-10.

The Fender Adjustable Guitar Stand is a superb way to showcase your instrument when not in use. Designed for acoustics electrics and basses this is stand welcomes almost any guitar and promises to keep it safe. All thanks to a strong sturdy metal construction and padded yokes which protect even the most delicate nitrocellulose finishes. This Fender Instrument Stand also boasts an adjustable neck height to accommodate a variety of guitar types while its lower support swivels to ensure both standard and offset body styles can rest peacefully. A quality design which does exactly what you need it to.

The Fender American Performer Stratocaster Neck is a US-made replacement that features the outstanding comfort you expect from a Strat neck, with a stylish look to boot. Crafted from premium maple with a rosewood fingerboard, the American Performer sports a modern "C"-shaped neck profile and satin finish that’s smooth and cooperative no matter the playing style. The 22 jumbo frets allow for wide, expressive bends while a stylish '70s-era headstock adds mass and sustain.
Replacement neck for a Fender or Squier electric guitar
Crafted in the same US facility as American-made Fender guitars
9.5" radius
Spacious rosewood fingerboard makes wide, expressive bends easier than ever
Nut Width (…

The Fender American Performer Stratocaster Neck is a US-made replacement that features the outstanding comfort you expect from a Strat neck, with a stylish look to boot. Crafted from premium maple with a matching maple fingerboard, the American Performer sports a modern "C"-shaped neck profile and satin finish that’s smooth and cooperative no matter the playing style. The 22 jumbo frets allow for wide, expressive bends while a stylish '70s-era headstock adds mass and sustain. It’s the perfect replacement neck upgrade for your Fender or Squier guitar.
Crafted in the same US facility as American-made Fender guitars
9.5" radius
Spacious maple fingerboard makes wide, expressive bends …

The Fender American Performer Telecaster Neck is a US-made replacement that features the outstanding comfort you expect from a Telecaster neck, with a stylish look to boot. Crafted from premium maple with a matching maple fingerboard, the American Performer sports a modern "C"-shaped neck profile and satin finish that’s smooth and cooperative no matter the playing style. The 22 jumbo frets allow for wide, expressive bends while a stylish '70s-era headstock adds mass and sustain. It’s the perfect replacement neck upgrade for your Fender or Squier guitar.
Crafted in the same US facility as American-made Fender guitars
9.5" radius
Spacious maple fingerboard makes wide, expressive bends …

Telecaster / Maple Neck / Fingerboard Material Rosewood

This American Professional II Telecaster neck is your ideal neck replacement solution for improved playability and a sharp look. Built from solid maple with a matching maple fingerboard, the deep "C"-shaped neck profile brings classic Telecaster comfort and agility that you can trust because it was built in the same facility as Fender’s US-made instruments.
Smooth rolled fingerboard edges supply more contact space and playability
25.5" scale length
Maple fingerboard with 22 narrow-tall frets and a 9.5" fingerboard radius
Fender's Super-Natural satin finish ensures maximum comfort
Crafted with premium materials, including a bone nut for enhanced tone, resonance, and sustain
4 pre-drilled …

There’s no denying the allure of a roasted maple neck. Resistant to humidity shifts and featuring a gorgeous, dark look, they have more sustain and add a unique note to the instrument’s voice.Crafted in the same facility as Fender U.S.-made instruments, the American Professional II Stratocaster Neck draws from more than sixty years of innovation, inspiration and evolution to meet the demands of today’s working player. Fender popular Deep “C” neck now sports smooth rolled fingerboard edges and a “Super-Natural” satin finish that provides a supremely comfortable feel. Other features include a 9.5"-radius maple fingerboard, bone nut and 22 narrow-tall frets …