Laser Measuring Tools

6 Piece Engineer's Marking and Measuring Set supplied in a wooden storage case. Contains the following tools: 3 x Precision Stainless Steel Squares 50mm (2in), 100mm (4in), 150mm (6in), accurate to BS939 Grade B standard1 x Steel Centre Finder, capacity: 38mm 1 x Stainless Steel Rule 150mm (6in)1 x Scriber 135mm (5¼in) Features: 3 x Precision Stainless Steel Squares 50mm (2in), 100mm (4in), 150mm (6in) 1 x Steel Centre Finder 38mm capacity 1 x Steel Centre Finder 38mm capacity 1 x Stainless Steel Rule 150mm (6in) 1 x Scriber 135mm (5¼in) Specifications: Dimensions: H:24.5 x W:4.6 x D:21.2 cm Colour: Silver Guarantee:5 years Material: Steel Model Number: FAIESMEASURE

Trammel Heads are used to draw circles and measure sizable distances with the accuracy of a divider. Also for layout, marking templates and drawing large circles. The trammel heads clamp on to any wood or metal bar up to 31mm wide. They feature needle point legs and one trammel can also hold a pencil. Features: Beam not supplied For laying out and scribing circles For laying out and scribing circles One trammel can also hold a pencil Specifications: Dimensions: H:9.8 x W:2.4 x D:7.2 cm Colour: Black Guarantee:5 years Material: Plastic Model Number: FAITRAMMEL

Get five VL53L0X Time of Flight sensors 940 nm. The Time of Flight Sensor is a compact module that accurately measures how long it takes for...

Details: All essential functions in a compact packageMeasurement of lengths, calculation of areas and volumes, intuitive use Large backlit...

1. 3 pieces of wood 0.5 inches deep 2. 3 pieces of wood 1 inch deep 3. Wood 3 x 1.5 inches deep 4.Metal Detection 5.Alternating current 6. Metal...

Multiple measurement methods: Laser Distance Measure supports the following measurements: single distance measurement, continuous measurement, area...

Multiple measurement methods: Laser Distance Measure supports the following measurements: single distance measurement, continuous measurement, area...

Multiple measurement methods: Laser Distance Measure supports the following measurements: single distance measurement, continuous measurement, area...

4-in-1 Depth Detection Function - Wall Stud Finder Wall Scanner has four different scanning modes namely Wall Stud Scan, Depth Mode, Metal Scan and...

Features:Higher accuracy: Indicators for measuring reference marks/battery level/buzzer indication/signal strength. Our products can quickly measure...

JSN-SR04T-V3.0 ultrasonic ranging module can provide 21cm-600cm non-contact distance sensing function, ranging accuracy can reach 3mmThis product...

Carefully crafted from high quality tool steel, these squares are accurate to BS939 Grade B standard. The stock and blade are precision ground to ensure straightness and accuracy, and the spring steel blade is hardened and tempered for increased durability. Features: Blade hardened and tempered for durability Precision ground to BS standard Grade B workshop accuracy Precision ground to BS standard Grade B workshop accuracy Specifications: Dimensions: H:32.8 x W:2.6 x D:19.7 cm Colour: Silver Guarantee:5 years Material: Steel Model Number: FAIES9

4 Piece Engineer's Squares Set supplied in a wooden storage case. Carefully crafted from high-quality tool steel, these squares are accurate to BS939 Grade B standard. The stock and blade are precision ground to ensure straightness and accuracy, and the spring steel blade is hardened and tempered for increased durability. Sizes: 50, 75, 100, 150mm Features: 1 x 50mm (2in) 1 x 75mm (3in) 1 x 75mm (3in) 1 x 100mm (4in) 1 x 150mm (6in) Specifications: Dimensions: H:24.1 x W:3.4 x D:18.1 cm Colour: Silver Guarantee:5 years Material: Carbon Steel Model Number: FAIESSET4

Mainly made of light aluminum alloy, it has excellent texture and can serve you for a period of . It has a wide range of applications and can be...

Aluminium Wide Track Cutting Guides are durable cutting guides, wider and more durable than many guides. With induction hardened bars, easy clamping and a strengthened wide profile design. They can be fixed to most work surfaces/tables. Suitable for wood plate or bar cutting applications. Features: Induction hardened bars Easy clamping Easy clamping Can be fixed to most work surfaces/tables Suitable for wood plate or bar cutting applications Specifications: Dimensions: H:124.0 x W:5.0 x D:7.5 cm Colour: Silver Guarantee:5 years Material: Aluminium Model Number: FAIWTCG36

Digital inclinometer with laser line and four magnetic sides for measuring angles and tilt percentages on metal and other surfaces. Wide range of uses including setting suspension camber and caster, collision avoidance bumper mounted radar and parking assist systems. Absolute zero measure on any flat surface with accuracy ±0.2° and measuring range 4 x 90°. Large backlit LCD display makes it easier to see in a low-lit environment. Power supply 3.7V lithium battery. USB Type-C (cable included). Features: • DIGITAL INCLINOMETER WITH LASER LINE AND FOUR MAGNETIC SIDES – Used to measure angles and tilt percentages on metal and other surfaces • WIDE RANGE OF USES – Including set…

High-visibility composite case with rubber cover, wrist strap and belt clip. Steel blade with Metric and Imperial scale and magnetic tip. Strong rewind mechanism with slide-button lock and push-button locks on side and base for added versatility. Features: • One of a comprehensive range of Sealey Hand Tools, suitable for daily use • High-visibility, composite case with rubber cover, wrist strap and belt clip • Steel blade with Metric and Imperial scale and magnetic tip • Strong rewind mechanism with slide-button lock and side and base mounted push-button locks for added versatility • Display Box of 12 • Lifetime guarantee* Specifications: Guarantee:Life Model Number: …

Locking wing divider to measure between two points. Suitable for transferring or comparing measurements or for scribing an arc, radius, or circle, features adjustment screw for fine adjustments. Brushed metal finish. Features: • Locking wing divider to measure between two points • Suitable for transferring or comparing measurements or for scribing an arc, radius, or circle • Adjustment screw for fine adjustments • Brushed metal finish Specifications: Guarantee:1 Year Model Number: AK97109

Comprising three Metric micrometers. Steel yoke, satin chrome finished thimble and sleeve with heavily machined knurling and locking mechanism. Supplied in foam lined, storage case with two calibrated spacers and thimble wrench. Features: • Set comprising Metric micrometers from the standard range • Set includes three external micrometers ranging from 0-75mm • Supplied in foam lined, storage case with two calibrated extension bars and thimble wrench • Lifetime guarantee* Specifications: Guarantee:Life Model Number: AK9651M

High quality steel rule permanently marked in Metric and Imperial graduations. Includes hanging hole. Features: • High quality steel rule permanently marked in Metric and Imperial graduations • Includes hanging hole • Lifetime guarantee* Specifications: Guarantee:Life Model Number: AK9643

Digital micrometer with spring loaded satin chrome pin. Easy-to-read LCD digital display with auto-off feature. Zero display in any position for relative and tolerance readings. Display switchable between Metric and Imperial units. Features: • Digital micrometer with spring loaded satin chrome pin • Easy-to-read LCD digital display with auto-off feature • Zero display in any position for relative and tolerance readings • Display switchable between Metric and Imperial units Specifications: Guarantee:1 Year Model Number: AK9638D

7-Button digital micrometer with satin chrome thimble and sleeve with hardened and tempered, satin finish stainless steel digital vernier caliper. Large, easy-to-read LCD read-outs. Displays switchable between Metric and Imperial units. Zero display at any point allows comparative measurement. Supplied in storage case with micrometer adjustment wrench. Features: • 150mm(6") Digital vernier caliper and 25mm(1") micrometer • 7-Button digital micrometer with satin chrome thimble and sleeve with hardened and tempered, satin finish stainless steel digital vernier caliper • Large, easy-to-read LCD read-outs • Displays switchable between Metric and Imperial units • Zero display …

Precision ground base with 6-button electronic gauge. Includes fine adjustment control carriage for accurate use. Six digit LCD read-out displays in Metric or Imperial. Features absolute and comparative functions. Tolerance function enables fast check of batch work. Supplied with scriber foot and clamp. Powered by CR2032 battery (supplied). Features: • Precision ground base with 6-button electronic gauge • Includes fine adjustment control carriage for accurate use • Six digit LCD read-out displays in Metric or Imperial • Features absolute and comparative functions • Tolerance function enables fast check of batch work • Supplied with scriber foot and clamp • …

7-Button digital micrometer with satin chrome thimble and sleeve. Large, easy-to-read 9mm high LCD read-out. Display switchable between metric and imperial units. Zero display in any position for relative and tolerance readings. Auto-power-off. Supplied with adjustment wrench and storage case. Features: • 7-Button digital micrometer with satin chrome thimble and sleeve • Large, easy-to-read 9mm high LCD read-out • Display switchable between metric and imperial units • Zero display in any position for relative and tolerance readings • Auto-power-off • Supplied with adjustment wrench and storage case Specifications: Guarantee:1 Year Model Number: AK9635D