Voltage Monitoring Relays

RELAY, PCB 5A DPCO 24VDC Contact Current AC Max:8A Coil Resistance:900ohm Contact Configuration:DPDT Approval Bodies:BEAB, CSA, DEMKO, IMQ, SEMKO, NF-USE, SETI, SEV, UL, VDE Approval Category:BEA more→B, CSA, DEMKO, IMQ, NF-USE, SEMKO, SETI, SETI, SEV, UL, VDE Coil Current:27mA Coil Operating Lower Percent Limit:80% Coil Operating Upper Percent Limit:150% Coil Voltage VDC Nom:24VDC

Good product with good quality Easy to use Value for money

Time Relay Multifunctional Relay Multifunctional Time Relay Relay PCU-510 DUO F&F 5403

RELAY, PCB 10A SPCO 24VDC Contact Current AC Max:10A Coil Resistance:1.2kohm Contact Configuration:SPCO Approval Bodies:BEAB, CSA, DEMKO, IMQ, SEMKO, NF-USE, SETI, SEV, UL, VDE Approval Category: more→BEAB, CSA, DEMKO, IMQ, NF-USE, SEMKO, SETI, SETI, SEV, UL, VDE Coil Current:20mA Coil Operating Lower Percent Limit:80% Coil Operating Upper Percent Limit:150% Coil Voltage VDC Nom:24VDC

Single-phase SSR for low heat generation, enables carrying 25 A (G3PJ-[]25B(-PU)) even for close mounting of three SSRs to contribute to downsizing of control panels.

Easy and fast installation thanks to wireless technology Intuitive and simple commissioning through embedded web page or EcoStruxure Power Commission Monitor electrical loads from a computer and be more→notified by email notification through a Local Access Network (LAN) reduce footprint and less wiring thanks to wireless communication devices Get access to data in the way you need, with local display and web page (instant values)

Extremely thin relays integrated with heat sinks. Downsizing achieved through optimum design of heat sink. Mounting possible via screws or via DIN track. Close mounting possible for linking terminals. more→(Except for G3PA-260B-VD and G3PA-450B-VD-2). Applicable with 3-phase loads. Replaceable power element cartridges. Complies with VDE 0160 (finger protection), with a dielectric strength of 4,000 V between input and load. Complies with VDE 0805, IEC 950. Certified by UL, CSA, and VDE (reinforced insulation). The G32A-A Power Device Cartridge (a Triac Unit) can be replaced with a new one. When the temperature indicator has changed from pink to red, the triac circuitry may have malfunctioned

BASE FOR 11 PIN PLUG-IN For Use With:60 Series Relay Colour:Blue External Depth:26mm External Length / Height:67mm External Width:38mm

Extremely thin relays integrated with heat sinks. Downsizing achieved through optimum design of heat sink. Mounting possible via screws or via DIN track. Applicable with 3-phase loads. Replaceable pow more→er element cartridges. Complies with VDE 0160 (finger protection), with a dielectric strength of 4,000 V between input and load. Complies with VDE 0805, IEC 950. Certified by UL, CSA, and VDE (reinforced insulation). The G32A-A Power Device Cartridge (a Triac Unit) can be replaced with a new one. When the temperature indicator has changed from pink to red, the triac circuitry may have malfunctioned possibly by an excessive flow of current, in which case, dismount the damaged cartridge for

This PowerTag NSX 250A is an energy sensor with wireless communication for 3P+N electrical networks. With its Monoconnect design, it is dedicated to Compact NSX 100/160/250, Compact NS 100/160/250, Co more→mpact INS250 and Compact INV 100/160/200/250. It has to be associated with a concentror or a gateway to provide circuit monitoring and diagnosis down to load level Energy sensor that provides accurate real-time measurements and energy values. The Performance category is Class 1. The Imax maximum current is 250A. The Ib Base current is 40A. The Saturation current is 500A and the Ist Starting current is 160mA. The Un Rated voltages are Phase-to-neutral 230VAC +/- 20 Percent and Phase-to-phase 400VAC …

Extremely thin relays integrated with heat sinks. Downsizing achieved through optimum design of heat sink. Mounting possible via screws or via DIN track. Close mounting possible for linking terminals. more→(Except for G3PA-260B-VD and G3PA-450B-VD-2). Applicable with 3-phase loads. Replaceable power element cartridges. Complies with VDE 0160 (finger protection), with a dielectric strength of 4,000 V between input and load. Complies with VDE 0805, IEC 950. Certified by UL, CSA, and VDE (reinforced insulation). The G32A-A Power Device Cartridge (a Triac Unit) can be replaced with a new one. When the temperature indicator has changed from pink to red, the triac circuitry may have malfunctioned