0-10V 8 Directions Environmental Signal Output Polycarbonate Wind Speed Sensor Anemometer

Feature: 1. The outer casing is made of polycarbonate material with high mechanical strength, high hardness and corrosion resistance. 2. Small size, light weight, easy to carry and assemble, with 8 indication directions, easy to operate. 3. With the internal smooth bearing system, it ensures the accuracy of information collection and is more convenient to use. 4. Rust-resistant, anti-exposure, high impact strength, long-term use in outdoor environments and anti-electromagnetic interference treatment can be applied to both four-wire and three-wire connections. 5. It adopts high-performance bearing, has low rotational resistance and accurate measurement, and is widely used in wind direction measurement in greenhouses, environmental protection, weather stations, ships, docks, and aquaculture. Specification: Condition: 100percent Brand New Item Type: Wind Speed Sensor Material: Polycarbonate Application: Widely used in wind direction measurement in greenhouses, environmental protection, weather stations, ships, docks, and aquaculture. Power Supply Wiring: Wide voltage 10-30V DC power input. Only 24V power supply is available for 0-10V output equipment. v:* {behavior:url(#default#VML);} o:* {behavior:url(#default#VML);} x:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} v:* {behavior:url(#default#VML);} o:* {behavior:url(#default#VML);} x:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Parameter: DC Power Supply (Default) 10-30V DC Maximum Power Consumption Voltage Output 1.2W Transmitter Circuit Operating Temperature -20 celsius to +60 celsius , 0percent RH-80percent RH Measuring Range 8 Indication Directions Dynamic Response Time less than 0.5s Output Signal Voltage Output 0-10V Load Capacity Voltage Output Output Resistance less than 250 Ohm Calculation Method: 0-10V Output Comparison Table Output Value (V) Corresponding Wind Direction Approximately equal to0 North Wind Approximately equal to1.4286 Northeast Wind Approximately equal to2.8571 East Wind Approximately equal to4.2857 Southeast Wind Approximately equal to5.7143 South Wind Approximately equal to7.1429 Southwest Wind Approximately equal to8.5714 West Wind Approximately equal to10 Northwest Wind Product Size: Approx. 23.5 x 18.5 cm / 9.3 x 7.3 in Weight: Approx. 317g / 11.2oz Common Problems and Solutions: No output or output error possible causes: 1) The range corresponding error causes the error PLC calculation. Please refer to the technical indicators for the range. 2) The wiring method is incorrect or the wiring sequence is wrong. 3) The power supply voltage is incorrect (24V power supply for 0-10V type). 4) The distance between the transmitter and the collector is too long, causing signal disturbance. 5) The PLC collection port is damaged. 6) Equipment damage . Package List: 1 x Wind Speed Sensor1 x Cable1 x Screw Kit (4 x Screw, 4 x Nut) Note: 1. The user should not disassemble it by himself, and should not touch the sensor core to