Dark mode
United Kingdom

Behringer 2600-VCO Modular System

Photos - Synthesizer Behringer 2600-VCO Modular System
£63.00 
Buy!
Muziker.co.uk

Behringer Behringer 2600-VCO Modular System

Muziker.co.uk
Delivery: in United Kingdom
Report
Behringer 2600-VCO Modular System
£63.00 

Buy Behringer 2600-VCO Modular System

When you make a purchase through links on our site, we may earn an affiliate commission.

Behringer Behringer 2600-VCO Modular System

The original 2600 came out in the '70s and was a mainly all discrete transistor design with some op-amps. The discrete circuitry gave the 2600 a very distinctive sound and were used by artists like Jean Michel Jarre, Depeche Mode, Stevie Wonder and so many more. The 2600-VCO is a compact and versatile module, giving you a VCO featuring four simulta... moreneous waveforms with the ability to control a wide frequency band for amazing flexibility. Modular synths were a landmark development in electronic music and today, it’s about to get better.This is the Behringer 2600-VCO. An analog VCO module and an authentic reproduction of the original ARP 2600 circuitry that can fit in a standard Eurorack case. The best part? It’s at a very affordable price. Mix the 2600-VCO in with your existing rig or start your modular synth journey from here. Either way you’re sure to have a lot of fun.The 2600-VCO is a feature rich module with four simultaneous waveforms: sine, triangle, saw and pulse which allow for an awe-inspiring palette of tonal possibilities. You can even control the oscillators frequency which ranges from 10 Hz to 10 kHz and from 0.03 Hz to 30 Hz when the 2600-VCO is switched to LF mode. The VCO can also be tuned to other instruments or VCOs with the Fine Tune knob. Adjust the pulse width range anywhere from 10% to 90% and you’ll be ready to rock whether you’re in a band or integrating the 2600-VCO into your monstrous setup!The 2600-VCO comes with an array of FM and CV inputs. Each FM input comes with their own attenuator to control the level of modulation. A separate PWM input can be used if you want to control or modulate the Pulse waveform. The 2600-VCO even accepts control voltages from a keyboard or MIDI/CV converter which you can turn on or off with the Keyboard On/Off switch, which also switches the VCO to low frequency mode. Power Supply: EURORACK Sound Engine: Analog Made in: China LFO: Yes Faders: 4 Modulation: Yes UK/EU Power supply included: No Battery Operation: No Display: No USB: No Colour: Black Oscillators: Yes Arpeggiator: Yes Package Contents: Manual Outputs: Jack 3,5mm TS Inputs: Jack 3,5mm TS Weight (g): 150.0 Envelope: ADSR Height (cm): 12.9 Effect Types: Oscilator Тype: Eurorack Module Width (cm): 4.2 Depth (cm): 8.1
Muziker.co.uk
Delivery: in United Kingdom
Report
£63.40
The original 2600 came out in the '70s and was a mainly all discrete transistor design with some op-amps. The discrete circuitry gave the 2600 a very distinctive sound and were used by artists like Jean Michel Jarre, Depeche Mode, Stevie Wonder and so many more. The 2600-VCO is a compact and versatile module, giving you a VCO featuring four simultaneous waveforms with the ability to control a wide frequency band for amazing flexibility. Modular synths were a landmark development in electronic music and today, it’s about to get better.This is the Behringer 2600-VCO. An analog VCO module and an authentic reproduction of the original ARP 2600 circuitry that can fit in a standard Eurorack case. The best part? It’s at a very affordable price. Mix the 2600-VCO in with your existing rig or start your modular synth journey from here. Either way you’re sure to have a lot of fun.The 2600-VCO is a feature rich module with four simultaneous waveforms: sine, triangle, saw and pulse which allow for an awe-inspiring palette of tonal possibilities. You can even control the oscillators frequency which ranges from 10 Hz to 10 kHz and from 0.03 Hz to 30 Hz when the 2600-VCO is switched to LF mode. The VCO can also be tuned to other instruments or VCOs with the Fine Tune knob. Adjust the pulse width range anywhere from 10% to 90% and you’ll be ready to rock whether you’re in a band or integrating the 2600-VCO into your monstrous setup!The 2600-VCO comes with an array of FM and CV inputs. Each FM input comes with their own attenuator to control the level of modulation. A separate PWM input can be used if you want to control or modulate the Pulse waveform. The 2600-VCO even accepts control voltages from a keyboard or MIDI/CV converter which you can turn on or off with the Keyboard On/Off switch, which also switches the VCO to low frequency mode.
Power Supply: EURORACK
Sound Engine: Analog
Made in: China
LFO: Yes
Faders: 4
Modulation: Yes
UK/EU Power supply included: No
Battery Operation: No
Display: No
USB: No
Colour: Black
Oscillators: Yes
Arpeggiator: Yes
Package Contents: Manual
Outputs: Jack 3,5mm TS
Inputs: Jack 3,5mm TS
Weight (g): 150.0
Envelope: ADSR
Height (cm): 12.9
Effect Types: Oscilator
Тype: Eurorack Module
Width (cm): 4.2
Depth (cm): 8.1
Product description is based on database from online stores. Be sure to verify all information directly with seller before purchasing.

How to place an order?How to add store?
Remember that online store is responsible for accuracy of information about price, warranty and delivery!
Filters