MSW Core Drill - 1500 W - 2100 rpm

On a construction site, time is money. The machines you rely upon should waste neither. The core drilling machine from MSW reliably drills holes in hard construction materials such as concrete, masonry, or asphalt. The drill barely vibrates in use, which ensures precise drill holes. Simply pack the core drilling machine into the well-organised case and take it to the construction site, where you can use it for precise drilling in any scenario. The core drill boasts 1500 W of power and a speed of 2100 RPM, making it suitable for hand-guided core drilling with diameters up to 102 mm. Thanks to its low energy consumption, you can also use the core drill with a power generator. For precise drilling results, use the built-in spirit level and the additional side handle. Achieve optimal drilling results by selecting from various power levels, using the largest diameter drill at the lowest speed. When drilling, rely on a dependable water cooling system. A high-quality forged steel water connection is integrated directly into the core drill. This reduces wear on the drill bit. Moreover, the machine will require less maintenance and boast a longer overall service life. You'll also decrease dust production during drilling, and your core drilling machine will experience less heat. Opt for maximum freedom of movement with the 2.19 m long power cable. Thanks to the residual current circuit breaker (PRCD - Portable Residual Current Device) integrated in the cable, you can always use the device safely. Should there be a short circuit in the drill or cable, operation immediately ceases.