MSW Core Drilling Machine - 2,000 W - 1,950 rpm

The handy core drilling machine MSW-DDM150 from MSW reliably drill holes in hard construction materials such as concrete, masonry or asphalt with the help of diamond core bits. It can also successfully drill large-calibre holes up to 150 mm in diameter. The integrated residual current protection circuit provides protection for both the user and the core drilling machine. On a construction site, time is money. Accordingly, there are high requirements when it comes to the devices you use. With 2,000 W and a maximum speed of 1,950 rpm, the diamond core drill from MSW provides generous power reserves for core drillings up to 150 mm in diameter. You can work with a wide variety of diamond drills. The diamond coring machine masters everything from holes in concrete to reinforced concrete, cement, masonry, asphalt and stone. You can drill holes both horizontally and vertically, depending on your needs. Two stable handles which you can securely position to the core drill enable you to drill as appropriate for the material. Depending on the drill diameter, you can drill up to depths of 100 mm. In addition to freehand drilling, you can also drill using a stand (not included in delivery). The guide rail enables you to achieve very precise holes up to 160 mm. The equally solid and compact powerhouse can be easily controlled via an intuitive on/off switch on the control panel. The residual current protection circuit (PRCD - Portable Residual Current Device) integrated into the cable provides protection against accidents for the user as well as the drill. Should there be a short circuit in the drill or cable, operation immediately ceases. A restart lock provides further protection in case of power failure. Delivery includes a carrying case for safe transportation.