RAIJINTEK NYX PRO Aluminium Full Tower Showcase - Titanium Tempered Glass

With the NYX PRO , Raijintek presents a first-class showcase chassis. The NYX PRO has been developed with water cooling in mind and is ideal for Modders and Enthusiasts alike.The interior is divided into several chambers with plenty of space for many high-end components and a full custome water loop. The solid steel chassis is surrounded by aluminum and tempered glass panels, expansion cards are installed vertically.FEATURES:Striking Aluminium Full-Tower ShowcaseSupports EEB and E-ATX Motherboardsboards up to 330 mmIncluded riser cable for mounting GPU's verticallyExterior panels made of Tempered Glass and AluminiumMatt black interior with two chambersSpace for two 360 radiators3x USB 3.0 Type A and audio connectionsSupports Graphics Cards up to 496 millimeters longThe Raijintek NYX PRO is a purebred showcase case and was designed for the installation of powerful hardware. 360mm radiators can be installed in the front and on the top of the chassis. The case is designed for use with AiO or custom water cooling, but alternatively case fans can also be attached to the radiator positions. A maximum height of 75mm clearance is provided for CPU coolers.Raijintek specifically designed the NYX PRO to install Graphics Cards vertically, which is why there is hardly any space for air coolers. Because the graphics cards are displayed vertically in this case and mounted in the left chamber. A riser cable is included for installing the GPU, however, for a second graphics card another riser cable must be purchased separately. Two included graphics card holders support heavy graphics cars. The motherboard is installed upside down in the right chamber .There is space for a 3.5" and a 2.5" drive underneath the case bottom and two 2.5" drives and optionally a 3.5" or 2.5" drive can be installed on the motherboard tray. This makes installastions of two hard disks and three SSDs or one hard disk and four SSDs possible. The ATX power supply is installed in the bottom of the chassis.The outer panels consist partly of 4mm thick Tempered Glass and partly of 3mm thick aluminum. The open nature of the chassis allows views into the interior from all sides. Cables can be laid unobtrusively through numerous openings in the steel core of the chassis. The front panel and top panel of the Raijintek NYX PRO are hinged for easy access to the interior.SPECIFICATIONS:Dimensions (W x H x D): 265 x 658 x 595mmMaterials: Steel, aluminium, Tempered GlassWeight: 13.75kgColour: Titanium (outer panels), Black (chassis)Motherboard Form factors:EEB / E-ATX (up to 305 x 330 mm)ATXMicro-ATXMini-ITXTotal fans possible:3x 120 / 2x 140 mm (front)3x 120 / 2x 140 mm (cover)Radiator mountings:3x 360/280 mm (front)1x 360/280 mm (cover)Drive bays:1x 3.5 inches (bottom)1x 3.5 / 2.5 inches (MB tray)1x 2.5 inches (bottom)2x 2.5 inches (MB tray)Power supply: 1x standard ATXExpansion slots: 2x 2 (vertical)I / O panel:3x USB 3.0 type A (USB 3.2 Gen 1, internal connection)2x 3.5 mm jack (3-pin, TRS, audio in