When you make a purchase through links on our site, we may earn an affiliate commission.
Draper 83 Piece HI-TORQ Socket Set - 21444 - Metric 1/4" and 1/2" Sq Dr To
The Draper socket sets have been made from chrome vanadium steel (CR-V) for strength and durability to meet the demand of dif... moreferent uses with high-quality satin chrome plating for corrosion protection. All components included have been manufactured and tested in accordance with DIN and ISO standards
The 72-tooth ratchet provides an easy to use reverse lever to quickly change the direction with ease. With you, in mind, the ratchet has been designed with an ergonomic soft-grip handle for continuous comfort while using.
The Draper Hi-Torq sockets provide optimum leverage with minimal risk of damage to the tools. This is achievable as the ratchets securely grip flats surfaces rather than the corner of fixings. Preventing the risk of the ratchet slipping and causing additional damage to the surface and tool
The set includes universal joints, extension bars and a sliding T-bar that enables you to operate effectively in hard-to-reach spaces as well as spark plug socket, pliers, flexible hose screwdriver, and a pickup tool with integral LED light.
This socket set has been built to last to help tackle everyday maintenance tasks around the home or workshop. Supplied in a sturdy, robust plastic case to ensure the tools are protected while being transported or in storage
Draper lifetime warranty
Draper Hi-Torq 83 Piece 1/4" and 1/2" Drive Socket Set Metric Combination
This high-quality metric socket set is made from chrome vanadium steel (CR-V) which is correctly hardened and tempered for st... morerength and durability. The components are finished with satin chrome plating for corrosion protection. Manufactured and tested in accordance with valid DIN and ISO standards. The 1/2, 72-tooth ratchets are equipped with an easy-to-use reverse lever to change the direction. It has a quick-release button to allow the rapid locking and quick release of sockets. Fitted with an ergonomic soft grip handle. The Draper HI-TORQ® sockets deliver optimum leverage with minimal risk of damage. That is because they are engineered to securely grip the flats rather than the corners of the fixings. So, they are less likely to slip and there is less risk of stripping the edges – even if the fixings are already damaged. There is a selection of Draper HI-TORQ®® combination spanners with 12-point ring ends that are chamfered and deep offset at 15 degrees. This delivers maximum leverage by transferring torque to the flats. It also simultaneously prevents slipping or damage to the fastener. The open end is also offset at 15 degrees for easier working in confined spaces. A wide range of screwdriver bits is organised in its own plastic storage case. The bits are made from high-quality CR-V steel and have a shot blast finish. The set includes many attachments and tools, including universal joints, extension bars and a sliding T-bar. There is also a spark plug socket, pliers, flexible hose screwdriver, and a pickup tool with integral LED light for retrieving nuts and washers in poorly lit, tight areas. Supplied in a robust plastic case for ease of transportation and storage. Features and Benefits • Made from chrome vanadium steel with satin chrome plating for corrosion protection • 72-tooth ratchets with easy-to-use reverse lever to change the direction • Ratchets have quick-release button for rapid locking and release of sockets • Draper HI-TORQ® sockets deliver optimum leverage with minimal risk of damage • Includes selection of Draper HI-TORQ® combination spanners with 12-point ring ends • Many attachments and tools, including universal joints, extension bars and a sliding T-bar • Robust case for transportation and storage Contents 16 x 1/2" Sq. Dr. Six-point Draper HI-TORQ® sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24, 27, 30, 32mm 3 x 1/2" Sq. Dr. Six-point Draper HI-TORQ® impact sockets: 17, 19, 21mm 1 x 1/2" Sq. Dr. Universal joint 1 x 1/2" Sq. Dr. 10mm spark plug 1 x 1/2" Sq. Dr. Extension bar, 125mm 1 x 1/2" Sq. Dr. Extension bar, 250mm 1 x 1/2" to 3/8" Sq. Dr. Bit adaptor 1 x 1/2" Sq. Dr. Quick-release 72-tooth ratchet handle 12 x 1/4" Sq. Dr. Six-point Draper HI-TORQ® sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13mm 5 x 1/4" Sq. Dr. Six-point Draper HI-TORQ® deep sockets: 6, 7, 8, 9, 10mm 1 x 1/4" Sq. Dr. Universal joint 2 x 1/4" Sq. Dr. Extension bars: 50, 100mm 1 x
This high-quality metric socket set is made from chrome vanadium steel (CR-V) which is correctly hardened and tempered for st... morerength and durability. The components are finished with satin chrome plating for corrosion protection. Manufactured and tested in accordance with valid DIN and ISO standards. The 1/2, 72-tooth ratchets are equipped with an easy-to-use reverse lever to change the direction. It has a quick-release button to allow the rapid locking and quick release of sockets. Fitted with an ergonomic soft grip handle. The Draper HI-TORQ® sockets deliver optimum leverage with minimal risk of damage. That is because they are engineered to securely grip the flats rather than the corners of the fixings. So, they are less likely to slip and there is less risk of stripping the edges – even if the fixings are already damaged. There is a selection of Draper HI-TORQ®® combination spanners with 12-point ring ends that are chamfered and deep offset at 15 degrees. This delivers maximum leverage by transferring torque to the flats. It also simultaneously prevents slipping or damage to the fastener. The open end is also offset at 15 degrees for easier working in confined spaces. A wide range of screwdriver bits is organised in its own plastic storage case. The bits are made from high-quality CR-V steel and have a shot blast finish. The set includes many attachments and tools, including universal joints, extension bars and a sliding T-bar. There is also a spark plug socket, pliers, flexible hose screwdriver, and a pickup tool with integral LED light for retrieving nuts and washers in poorly lit, tight areas. Supplied in a robust plastic case for ease of transportation and storage. Features and Benefits • Made from chrome vanadium steel with satin chrome plating for corrosion protection • 72-tooth ratchets with easy-to-use reverse lever to change the direction • Ratchets have quick-release button for rapid locking and release of sockets • Draper HI-TORQ® sockets deliver optimum leverage with minimal risk of damage • Includes selection of Draper HI-TORQ® combination spanners with 12-point ring ends • Many attachments and tools, including universal joints, extension bars and a sliding T-bar • Robust case for transportation and storage Contents 16 x 1/2" Sq. Dr. Six-point Draper HI-TORQ® sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24, 27, 30, 32mm 3 x 1/2" Sq. Dr. Six-point Draper HI-TORQ® impact sockets: 17, 19, 21mm 1 x 1/2" Sq. Dr. Universal joint 1 x 1/2" Sq. Dr. 10mm spark plug 1 x 1/2" Sq. Dr. Extension bar, 125mm 1 x 1/2" Sq. Dr. Extension bar, 250mm 1 x 1/2" to 3/8" Sq. Dr. Bit adaptor 1 x 1/2" Sq. Dr. Quick-release 72-tooth ratchet handle 12 x 1/4" Sq. Dr. Six-point Draper HI-TORQ® sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13mm 5 x 1/4" Sq. Dr. Six-point Draper HI-TORQ® deep sockets: 6, 7, 8, 9, 10mm 1 x 1/4" Sq. Dr. Universal joint 2 x 1/4" Sq. Dr. Extension bars: 50, 100mm 1 x
The Draper socket set is a high-quality metric socket set made from chrome vanadium steel (CR-V) which is correctly hardened... moreand tempered for strength and durability. All parts are manufactured according to the valid DIN and ISO standards. With the components with satin chrome plating for corrosion protection. The 72-tooth ratchet is equipped with an easy-to-use reverse lever to change the direction. It has a quick-release button to allow the rapid locking and quick release of sockets. With comfort in mind, the ratchet handles have been designed and fitted with ergonomic soft-grip handles for continuous comfort while using. The Draper HI-TORQ® sockets deliver optimum leverage with minimal risk of damage. That is because they are engineered to securely grip the flats rather than the corners of the fixings. They are less likely to slip and there is less risk of stripping the edges – even if the fixings are already damaged. Within this set you will find a selection of Draper Hi-Torq combination spanners with a 12-point ring ends that are chamfrered with a deep offsset at 15°. This delivers maximum leverage by transferring torque to the flats. It also simultaneously prevents slipping or damage to the fastener. With the open end is also offsets at 15° to allow working in confined spaces easier and a wide range of screwdriver bits. The set includes 16 x 1/2" Sq. Dr. six-point Draper HI-TORQ® sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24, 27, 30, 32mm, 3 x 1/2" Sq. Dr. six-point Draper HI-TORQ® impact sockets: 17, 19, 21mm, 1 x 1/2" Sq. Dr. Universal joint, 1 x 1/2" Sq. Dr. Spark plug, 10mm, 1 x 1/2" Sq. Dr. Extension bar, 125mm & 250mm, 1 x 1/2" to 3/8" Sq. Dr. Bit adaptor, 1 x 1/2" Sq. Dr. Quick-release 72-tooth ratchet handle, 12 x 1/4" Sq. Dr. six-point Draper HI-TORQ® sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13mm, 5 x 1/4" Sq. Dr. six-point Draper HI-TORQ® Deep sockets: 6, 7, 8, 9, 10mm, 1 x 1/4" Sq. Dr. Universal joint, 2 x 1/4" Sq. Dr. Extension bars: 50, 100mm, 1 x 1/4" Sq. Dr. Sliding T-Bar, 1 x 1/4" Hex (F) to 1/4" Sq. Dr. adaptor (F), 1 x 1/4" Sq. Dr. Quick-release 72-tooth ratchet handle, 4 x 3/8" 75mm Spline bits: M12, M14, M16, M18, 1 x 1/4" Hex (M) to 1/4" Sq. Dr. adaptor (M), 1 x 1/4" Sq. Dr. Spinner handle, 1 x 7mm Flexible hose screwdriver, 6 x Combination spanners: 10, 11, 12, 13, 14, 17mm, 1 x Mini long nose pliers, 1 x Mini side cutting pliers, 1 x Pick Up tool, 1 x 1/4" Hex 25mm Plain slot screwdriver bit: 4mm, 4 x 1/4" Hex 25mm PH-type screwdriver bits: No.0, No.1, No.2, No.3, 3 x 1/4" Hex 25mm PZ-type screwdriver bits: No.1, No.2, No.3, 7 x 1/4" Hex 25mm Draper TX-STAR® screwdriver bits: T8, T10, T15, T20, T25, T27, T30 and 4 x 1/4" Hex 25mm screwdriver bits: 3, 4, 5, 6mm. Every item included in the set has its own designated place within the case to ensure everything remains organised and in place while in transport or in storage. This comes with the Draper
The Draper socket set is a high-quality metric socket set made from chrome vanadium steel (CR-V) which is correctly hardened... moreand tempered for strength and durability. All parts are manufactured according to the valid DIN and ISO standards. With the components with satin chrome plating for corrosion protection. The 72-tooth ratchet is equipped with an easy-to-use reverse lever to change the direction. It has a quick-release button to allow the rapid locking and quick release of sockets. With comfort in mind, the ratchet handles have been designed and fitted with ergonomic soft-grip handles for continuous comfort while using. The Draper HI-TORQ® sockets deliver optimum leverage with minimal risk of damage. That is because they are engineered to securely grip the flats rather than the corners of the fixings. They are less likely to slip and there is less risk of stripping the edges – even if the fixings are already damaged. Within this set you will find a selection of Draper Hi-Torq combination spanners with a 12-point ring ends that are chamfrered with a deep offsset at 15°. This delivers maximum leverage by transferring torque to the flats. It also simultaneously prevents slipping or damage to the fastener. With the open end is also offsets at 15° to allow working in confined spaces easier and a wide range of screwdriver bits. The set includes 16 x 1/2" Sq. Dr. six-point Draper HI-TORQ® sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24, 27, 30, 32mm, 3 x 1/2" Sq. Dr. six-point Draper HI-TORQ® impact sockets: 17, 19, 21mm, 1 x 1/2" Sq. Dr. Universal joint, 1 x 1/2" Sq. Dr. Spark plug, 10mm, 1 x 1/2" Sq. Dr. Extension bar, 125mm & 250mm, 1 x 1/2" to 3/8" Sq. Dr. Bit adaptor, 1 x 1/2" Sq. Dr. Quick-release 72-tooth ratchet handle, 12 x 1/4" Sq. Dr. six-point Draper HI-TORQ® sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13mm, 5 x 1/4" Sq. Dr. six-point Draper HI-TORQ® Deep sockets: 6, 7, 8, 9, 10mm, 1 x 1/4" Sq. Dr. Universal joint, 2 x 1/4" Sq. Dr. Extension bars: 50, 100mm, 1 x 1/4" Sq. Dr. Sliding T-Bar, 1 x 1/4" Hex (F) to 1/4" Sq. Dr. adaptor (F), 1 x 1/4" Sq. Dr. Quick-release 72-tooth ratchet handle, 4 x 3/8" 75mm Spline bits: M12, M14, M16, M18, 1 x 1/4" Hex (M) to 1/4" Sq. Dr. adaptor (M), 1 x 1/4" Sq. Dr. Spinner handle, 1 x 7mm Flexible hose screwdriver, 6 x Combination spanners: 10, 11, 12, 13, 14, 17mm, 1 x Mini long nose pliers, 1 x Mini side cutting pliers, 1 x Pick Up tool, 1 x 1/4" Hex 25mm Plain slot screwdriver bit: 4mm, 4 x 1/4" Hex 25mm PH-type screwdriver bits: No.0, No.1, No.2, No.3, 3 x 1/4" Hex 25mm PZ-type screwdriver bits: No.1, No.2, No.3, 7 x 1/4" Hex 25mm Draper TX-STAR® screwdriver bits: T8, T10, T15, T20, T25, T27, T30 and 4 x 1/4" Hex 25mm screwdriver bits: 3, 4, 5, 6mm. Every item included in the set has its own designated place within the case to ensure everything remains organised and in place while in transport or in storage. This comes with the Draper
Draper 21444 Hi-Torq® Metric Socket Set 1/4in & 1/2in Sq. Dr. (83 Piece) e
This high-quality metric socket set is made from chrome vanadium steel (CR-V) which is correctly hardened and tempered for st... morerength and durability. The components are finished with satin chrome plating for corrosion protection. Manufactured and tested in accordance with valid DIN and ISO standards. The 1/2 72-tooth ratchets are equipped with an easy-to-use reverse lever to change the direction. It has a quick-release button to allow the rapid locking and quick release of sockets. Fitted with an ergonomic soft grip handle. The Draper HI-TORQ® sockets deliver optimum leverage with minimal risk of damage. That is because they are engineered to securely grip the flats rather than the corners
Draper Hi-torq Metric Socket Set 1/4" & 1/2" Sq. Dr. &
This high-quality metric socket set is made from chrome vanadium steel (CR-V) which is correctly hardened and tempered for st... morerength and durability. The components are finished with satin chrome plating for corrosion protection. Manufactured and tested in accordance with valid DIN and ISO standards. The 1/2, 72-tooth ratchets are equipped with an easy-to-use reverse lever to change the direction. It has a quick-release button to allow the rapid locking and quick release of sockets. Fitted with an ergonomic soft grip handle. The Draper HI-TORQ sockets deliver optimum leverage with minimal risk of damage. That is because they are engineered to securely grip the flats rather than the corners of
The Draper socket set is a high-quality metric socket set made from chrome vanadium steel (CR-V) which is correctly hardened and tempered for strength and durability. All parts are manufactured according to the valid DIN and ISO standards. With the components with satin chrome plating for corrosion protection. The 72-tooth ratchet is equipped with an easy-to-use reverse lever to change the direction. It has a quick-release button to allow the rapid locking and quick release of sockets. With comfort in mind, the ratchet handles have been designed and fitted with ergonomic soft-grip handles for continuous comfort while using. The Draper HI-TORQ® sockets deliver optimum leverage with minimal risk of damage. That is because they are engineered to securely grip the flats rather than the corners of the fixings. They are less likely to slip and there is less risk of stripping the edges – even if the fixings are already damaged. Within this set you will find a selection of Draper Hi-Torq combination spanners with a 12-point ring ends that are chamfrered with a deep offsset at 15°. This delivers maximum leverage by transferring torque to the flats. It also simultaneously prevents slipping or damage to the fastener. With the open end is also offsets at 15° to allow working in confined spaces easier and a wide range of screwdriver bits. The set includes 16 x 1/2" Sq. Dr. six-point Draper HI-TORQ® sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24, 27, 30, 32mm, 3 x 1/2" Sq. Dr. six-point Draper HI-TORQ® impact sockets: 17, 19, 21mm, 1 x 1/2" Sq. Dr. Universal joint, 1 x 1/2" Sq. Dr. Spark plug, 10mm, 1 x 1/2" Sq. Dr. Extension bar, 125mm & 250mm, 1 x 1/2" to 3/8" Sq. Dr. Bit adaptor, 1 x 1/2" Sq. Dr. Quick-release 72-tooth ratchet handle, 12 x 1/4" Sq. Dr. six-point Draper HI-TORQ® sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13mm, 5 x 1/4" Sq. Dr. six-point Draper HI-TORQ® Deep sockets: 6, 7, 8, 9, 10mm, 1 x 1/4" Sq. Dr. Universal joint, 2 x 1/4" Sq. Dr. Extension bars: 50, 100mm, 1 x 1/4" Sq. Dr. Sliding T-Bar, 1 x 1/4" Hex (F) to 1/4" Sq. Dr. adaptor (F), 1 x 1/4" Sq. Dr. Quick-release 72-tooth ratchet handle, 4 x 3/8" 75mm Spline bits: M12, M14, M16, M18, 1 x 1/4" Hex (M) to 1/4" Sq. Dr. adaptor (M), 1 x 1/4" Sq. Dr. Spinner handle, 1 x 7mm Flexible hose screwdriver, 6 x Combination spanners: 10, 11, 12, 13, 14, 17mm, 1 x Mini long nose pliers, 1 x Mini side cutting pliers, 1 x Pick Up tool, 1 x 1/4" Hex 25mm Plain slot screwdriver bit: 4mm, 4 x 1/4" Hex 25mm PH-type screwdriver bits: No.0, No.1, No.2, No.3, 3 x 1/4" Hex 25mm PZ-type screwdriver bits: No.1, No.2, No.3, 7 x 1/4" Hex 25mm Draper TX-STAR® screwdriver bits: T8, T10, T15, T20, T25, T27, T30 and 4 x 1/4" Hex 25mm screwdriver bits: 3, 4, 5, 6mm. Every item included in the set has its own designated place within the case to ensure everything remains organised and in place while in transport or in storage. This comes with the Draper
Product description is based on database from online stores. Be sure to verify all information directly with seller before purchasing.
This website uses cookies. Proceeding to use this website gives your consent for gathering and processing your data for analytic and marketing purposes.
