Buy TP-LINK MC111CS network media converter 100 Mbit/s Single-mode Black
When you make a purchase through links on our site, we may receive a affiliate commission.
TP Link RJ45 to 100Mbits Single Mode SC Fibre Converter Black
The MC111CS is a media converter designed to convert 100BASE-FX fibre to 10100Base-TX copper media or vice versa. Adopting WD... moreM technology, MC111CS takes only one fibre cable to transmit and receive data, which will save half cabling cost for you.
TP-Link TP-Link MC111CS network media converter 100 Mbit/s Single-mode Black
Complies with 802.3u 10/100Base-TX, 100Base-FX standards Auto-negotiation of Half-Duplex / Full-Duplex transfer mode Adopts W... moreDM technology, transmitting and receiving data on one single fiber Work with MC112CS WDM single fiber media converter Extends fiber distance up to 20km (12.5 miles) The MC111CS is a media converter designed to convert 100BASE-FX fiber to 10/100Base-TX copper media or vice versa. Adopting WDM technology, MC111CS takes only one fiber cable to transmit and receive data, which will half cable cost for you. Designed with IEEE 802.3u 100Base-TX and 100Base-FX standards, the MC111CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC111CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1550nm on transferring data and at 1310nm on receiving data. So the other end device to cooperate with the MC111CS should work at 1310nm on transferring data and at 1550nm on receiving data. Another TP-LINK´s media converter MC112CS is just one of the examples to cooperate with MC111CS. Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs. The MC111CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers(12.5 miles). Network Cable types supported Cat3, Cat4, Cat5, Cat5e Duplex system Full, Half Auto MDI/MDI-X Yes Ethernet LAN data rates 10,100 Mbit/s Networking standards IEEE 802.3, IEEE 802.3u Maximum data transfer rate 100 Mbit/s Performance Fiber mode structure Single-mode Wavelength-division multiplexing (WDM) Yes Maximum transfer distance 20000 m Features LED indicators Yes Product colour Black Internal No Ports & interfaces Fiber optic connector SC Fiber ports quantity 1 Ethernet LAN (RJ-45) ports 1 Connectivity technology Wired Power Power consumption (max) 2.49 W Weight & dimensions Height 27 mm Depth 73 mm Width 95 mm Operational conditions Storage relative humidity (H-H) 5 - 90% Operating relative humidity (H-H) 10 - 90% Storage temperature (T-T) -40 - 70 °C Operating temperature (T-T) 0 - 40 °C Packaging content Manual Yes Certificates Compliance certificates RoHS Logistics data Harmonized System (HS) code 85176990 leaflet manual pdf
Highlights: • Complies With 802.3U 10/100Base-Tx 100Base-Fx Standards • Link Fault Passthrough An... mored Far End Fault Minimize The Loss Caused By Link Failure Timely • Adopts Wdm Technology Transmitting And Receiving Data On One Single Fiber What This Product Does The Mc111cs Is A Media Converter Designed To Convert 100Base-Fx Fiber To 100Base-Tx Copper Media Or Vice Versa. Adopting Wdm Technology Mc111cs Takes Only One Fiber Cable To Transmit And Receive Data Which Will Save Half Cabling Cost For You. Designed Under Ieee 802.3U 10/100Base-Tx And 100Base-Fx Standards The Mc111cs Is Designed For Use With Single-Mode Fiber Cable Utilizing The Sc-Type Connector. The Mc111cs Supports Longwave (Lx) Laser Specification At A Full Wire Speed Forwarding Rate. It Works At 1550Nm On Transferring Data And At 1310Nm On Receiving Data. So The Other End Device To Cooperate With The Mc111cs Should Work At 1310Nm On Transferring Data And At 1550Nm On Receiving Data. Another Tp-Link&Acute;S Media Converter Mc112cs Is Just One Of The Examples To Cooperate With Mc111cs. Other Features Of This Module Include The Ability To Be Used As A Stand Alone Device (No Chassis Required) Or With Tp-Link&Acute;S 19&Acute;&Acute; System Chassis Auto Mdi/Mdi-X For Tx Port Auto Negotiation Of Duplex Mode On Tx Port And Front Panel Status Leds. The Mc111cs Will Transmit At Extended Fiber Optic Distances Utilizing Single-Mode Fiber Up To 20 Kilometers.
Highlights: • Complies With 802.3U 10/100Base-Tx 100Base-Fx Standards • Link Fault Passthrough And Far End Fault Minimize The Loss Caused By Link Failure Timely • Adopts Wdm Technology Transmitting And Receiving Data On One Single Fiber What This Product Does The Mc111cs Is A Media Converter Designed To Convert 100Base-Fx Fiber To 100Base-Tx Copper Media Or Vice Versa. Adopting Wdm Technology Mc111cs Takes Only One Fiber Cable To Transmit And Receive Data Which Will Save Half Cabling Cost For You. Designed Under Ieee 802.3U 10/100Base-Tx And 100Base-Fx Standards The Mc111cs Is Designed For Use With Single-Mode Fiber Cable Utilizing The Sc-Type Connector. The Mc111cs Supports Longwave (Lx) Laser Specification At A Full Wire Speed Forwarding Rate. It Works At 1550Nm On Transferring Data And At 1310Nm On Receiving Data. So The Other End Device To Cooperate With The Mc111cs Should Work At 1310Nm On Transferring Data And At 1550Nm On Receiving Data. Another Tp-Link&Acute;S Media Converter Mc112cs Is Just One Of The Examples To Cooperate With Mc111cs. Other Features Of This Module Include The Ability To Be Used As A Stand Alone Device (No Chassis Required) Or With Tp-Link&Acute;S 19&Acute;&Acute; System Chassis Auto Mdi/Mdi-X For Tx Port Auto Negotiation Of Duplex Mode On Tx Port And Front Panel Status Leds. The Mc111cs Will Transmit At Extended Fiber Optic Distances Utilizing Single-Mode Fiber Up To 20 Kilometers.
The product description is generated based on data from online stores. Before purchasing be sure to verify all information directly with the seller.
