Crown CT23008-125HX
Cutting Discs217
 |
The Best for Ceramic Diamond Cutting Disc delivers clean cuts in tiles for fittings in installation work. Smooth cuts with minimal chipping are made possible by the continuous cutting rim. Additionall more→y, the diamond matrix is optimised to cut through tiles. Use this disc on porcelain, tiles and ceramic. Appropriate for GWS 10,8-76 V-EC Professional cordless angle grinder with 10 mm toolholder • Clean Cuts in Tiles • Best for Ceramic Diamond Cutting Disc delivers clean cuts in tiles • Smooth cuts with minimal chipping are made possible by the continuous cutting rim • Diamond matrix is optimised to cut through tiles Specifications: Diameter mm: 125 Bore diameter mm: 22.23 …
 |
Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs more→must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjus
 |
The BOSCH PROFESSIONAL X-Lock Self Adhesive 125 mm Grinder Sanding Plate is a high-quality accessory designed for use with electric tools, specifically grinders. This sanding plate is perfect for remo more→ving rust, paint, and other coatings from various surfaces. It is made of durable materials to ensure longevity and effectiveness.T
 |
The Expert for Stone Cutting Disc provides powerful cutting performance in stone with maximum safety. The disc is composed of high-quality silicon carbide and resin specifically designed for work on s more→tone with impressive results. The disc's precision-manuf
 |
• Aluminium oxide flap disc for descaling, derusting, weld preparation, weld cleaning and general surface preparation.• Abrasive flaps are attached to rigid disc with epoxy adhesive - does not require more→backing pad.• Depressed centre disc suitable for electric and air tools.• Size/Bore: ø125/22mm.
 |
These Makita Type 41 Pro Cutting discs are designed for fast clean cutting and are particularly suitable for use with cordless angle grinders for around 40% longer battery life over a standard cutting more→wheel. They are manufactured from high quality bonded 60G aluminium oxide for long life and are suitable for cutting steel and stainless steel. Please note generic stock image shown for illustration purposes only. Refer to the description for the specifications. Specifications • Diameter: 125mm • Thickness: 1.2mm • Bore: 22.23mmContents
 |
The Standard for Metal Cutting Disc cuts reliably through metal. Its aluminium oxide disc is designed for general use with metal. Use this disc for cutting metal. Bosch cutting discs comply with the m more→aximum safety requirements, such as EN 12413. It is compatible with angle grinders.With depressed centre• Reliable Cutting in Metal• Standard for Metal Cutting Disc cuts reliably through metal• The aluminium oxide disc is designed for general use with metalSpecificat
 |
Bosch X-LOCK Cutting Blade Carbide Multi Wheel.Specifica
Wire & Cup Brushes199
 |
Price from £11.95 up to £13.71
Compare prices4→Compare prices and buy Sealey Wire Brush Set 5pc Brassed
• Suitable for use with power tools up to the maximum rated speed (4500rpm).• Shaft: ø6mm.• Contents: Brushes; Wire Cup; ø50mm, 75mm, Flat Wire; ø50mm, 75mm, ø25mm Decarbonising/C
 |
Price from £13.49 up to £26.95
Compare prices6→Compare prices and buy Bosch Professional X-lock Heavy Metal 75x0.5x125 M Brush Cup Silver 260862
X-Lock Heavy For Metal Cup Brush, Knotted Wire Provides An Aggressive Cleaning Performance It Is Suitable For Use With X-Lock Angle Grinders.Featur
 |
Price from £5.49
Compare prices3→Compare prices and buy Lessmann Precision End Wire Brush 60mm 12mm 6mm Shank LES451161
The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for worki more→ng on edges and recesses and the inside of bores etc.The Lessmann End Brush With Shank has the following specification: Wire Type: Steel.Diameter: 12mmWire Height: 20mmOverall Length: 60mmWire Gauge: 0.30.Max Speed: 20,000/rpm.Addi
 |
Price from £30.95
Compare prices3→Compare prices and buy Lessmann Knot End Wire Brush 29mm 6mm Shank 456278
The Lessmann Knot End Brushes are fitted with a 6mm shank. When the brush is in rotation it will open up and increase in diameter. This enables the operator to work in hard to reach areas such as dril more→led holes and recesses of all kinds.The Lessmann Knot End Brush With Shank has the following specification: Diameter: 29mm.Wire: 0.35 Steel.Additiona
 |
Price from £5.95 up to £6.70
Compare prices5→Compare prices and buy Makita D-66070 Wire Brush Set for Drill (3 Piece)
Makita D-66070 Wire Brush Set for Drill (3 Piece)
The Makita D-66070 is a 3 Piece Wire Brush Set designed to be used with power tools to remove rust and paint from metal objects.Feature
more→> - Cup type: light duty for removing coatings, rust, and cleaning. For flat or irregular surfaces/edges.
- Wheel type: light duty for removing coatings, rust, and cleaning. For flat or irregular surfaces/edges.
- End type: light duty for working on hard to reach areas (pipes and profiles).
Specificatio
- Part Number: D-66070
- Number of Pieces: 3
The Makita D-66070 is a 3 Piece Wire Brush Set designed to be used with power tools to remove rust and paint from metal objects.Feature
more→> - Cup type: light duty for removing coatings, rust, and cleaning. For flat or irregular surfaces/edges.
- Wheel type: light duty for removing coatings, rust, and cleaning. For flat or irregular surfaces/edges.
- End type: light duty for working on hard to reach areas (pipes and profiles).
Specificatio
- Part Number: D-66070
- Number of Pieces: 3
 |
Price from £2.95
Compare prices3→Compare prices and buy Faithfull Point End Crimped Wire Brush 12mm 6mm Shank WBSI12P
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBSI12P Wire End Brush has the following specifications: Type: Pointed end. Face diameter: 12/60 mm x 20 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm steel. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
 |
Price from £5.58 up to £5.95
Compare prices3→Compare prices and buy Sealey Decarbonising Brush Set 2pc
• Brassed and crimped steel brushes with flat and pointed fill. Suitable for decarbonising cylinder head ports and components.• Shank ø: 6mm.Brassed and crimped steel brushes with flat and pointe more→d fill. Suitable for decarbonising cylinder head ports and components.• Brassed and crimped steel brushes with flat and pointed fill. • Suitable for decarbonising cylinder head ports and components. • Shank Diameter: ø6mm. • Model No. VS1801Technical Specification:N
 |
Price from £3.49
Compare prices3→Compare prices and buy Faithfull Crimped Wire Wheel Brush 75mm 6mm Shank WBS75C
This Faithfull crimped steel Wire Circular Brush is designed for light to medium-duty applications such as cleaning metal surfaces prior to welding or painting. Fitted with a 6mm (1/4in) shank and des more→igned to operate with power tools up to a maximum of 4,500/min. Shaft: 6mm (1/4in). Wire: 0.30mm crimped steel wire. Conforms to ISO 9001 and DIN EN1083-1 and 2 standards.Diame
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
