Einhell Professional TP-RO 18 Set Li BL Solo (4350410)
Diamond Core Bits & Milling Cutters281
 |
Single fluted Tungsten Carbide straight cutter for fast free cutting. Single flutes should be chosen where speed and clearance rates are more important than the finish. Depth of cut should not exc more→eed cutter diameter. Specifications • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 25.4 • Cut Length Imperial: 1 • Overall Length Metric: 60.5
 |
Clarkson 01PM/03PM standard series multi flute end mills. Made from M42 High Speed Steel with 8% cobalt. Sizes 2.0mm - 20.0mm: Four Flutes Sizes 21.0mm - 38.0mm: Six Flutes Sizes 40.0mm - 50.00mm: Eig more→ht Flutes BS 122/4. Specifications • Milling Diameter: 9mm • Shank Diameter: 10mm • Length of Cut: 21mm • Overall Length: 66.5mm • Square End Helix Angle: 30° Features and Benefits • Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Multidirectiona
 |
SNAP/CS Trend Snappy Countersink with heat treated tool steel countersink with a HSS drill. Adjustable for different length screws and can produce counterbored hole for woodplugs. The drill produce pi more→lot holes only. SNAP/CS/10: D= 3/8 inch (9.5 mm) D2= 1/8 inch (3.25 mm) Shank Diameter= 1/4 inch HEX Screw size: Softwood (S/W)= No.10, Hardwood (H/W)= No. 8 SNAP/CS/12 D= 1/2 inch (12.7 mm) D2= 9/64 inch (3.5 mm) Shank Diameter= 1/4 inch HEX Screw size: S/W=No.12, H/W=No.10 SNAP/CS/8 D= 3/8 inch (9.5 mm) D2= 7/64 inch (2.75 mm) Shank Diameter= 1/4 inch HEX Screw size: S/W=No.8, H/W=No.6
 |
Trend Snappy 9.5mm diameter countersink - with adjustable drill 9.5mm diameter countersink with pilot drill designed for Imperial gauge screws. The perfect, fast swap accessory for clean, consisten more→t finishes. Made from hardened tool steel for assured performance. "Made from hardened tool steel for assured performance. Made from hardened tool steel for assured performance. Fitted with high quality 2mm diameter replaceable HSS (High Speed Steel) designed for piloting in hardwoods using No4 Imperial gauge screws. Easily adjustable drill length for different timber thicknesses and fast alignment. Can be used to make countersinks and also counterbores when used with Trend Snappy SNAP/PC/95T …
 |
To suit user preference, the table shows angles from the horizontal and the profiles show angles from the vertical. Specifications • Shank Diameter: 1/4 • Dia Metric: 14.3 • Dia2 Metri more→c: 12.7 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 52 • Angle: 104
 |
Drill, countersink, and counterbore in one step with the Stanley Countersinks. Built with sturdy materials, the STA62507 is a reliable companion, ready to tackle challenges in both workshop and job si more→te environments. Its ergonomic design prioritizes user comfort during extended use, providing a secure grip and precise control. From woodworking to various applications, this tool empowers you to achieve exceptional outcomes. Its versatility positions it as an indispensable asset for tackling a wide range of challenges. Features & Benefits • Complete two jobs in one • For use with STA62380-XJ Flip and Drive connector • For use in hard and soft wood, composite board and MDF Specifications …
 |
HSS Three Flute 90° Countersink. Specifications • Nominal Diameter: 16.5mm • Shank Diameter: 10mm • Overall Length: 60mm • Capacity: 2.5mm - 16.5mm Features and Benefits &bull more→; Produces countersinks for cap screws • Self centering and chatter free • Can be used for chamferring • DIN 335C
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
