Graphite 59G087
Cutting Discs241
 |
The X Lock system makes it easier to swap out angle grinder accessories than ever before. Simply pull the X Lock lever on the machine to release any attached accesory, and press the new accessory into more→place until it locks with an audible click. There is no need for additional tools or detachable components and X Lock accessories are mounted safely and securely in a matter of seconds. These Makita X Lock cutting discs can be used in standard angle grinders as well as X Lock machines. Features & Benefits • X Lock mechanism allows accessories to be attached without a nut, flange or spanner • No need to worry about missing parts or tools • X Lock accessories can be swapped over in …
 |
The X-LOCK Backing Pad Hook and Loop is ideal for sanding applications with sanding paper of all grit sizes. The Backing Pad´s thermostable plastic material makes it resistant to high temperatures and more→breakage. A special edge profile enables easy sanding paper changes. Changing backing pads is fast and convenient thanks to the keyless X-LOCK system. It is suitable for use with X-LOCK angle grinders. X-LOCK Backing Pad, Hook and Loop Ideal for all paper sanding sheets with hook & loop fastening • Ideal for Sanding Applications with Sanding Paper of All Grit Sizes • X-LOCK Backing Pad Hook and Loop is ideal for sanding applications with sanding paper of all grit sizes • Resists h…
 |
Depressed Centre Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Discs wit more→h a 1.8mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They have been developed to make angle grinders more versatile in use by allowing better access in some applications. Metal cutting discs must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure …
 |
Use this disc for grinding welding seams and coarse-sanding metal surfaces. Changing flap discs is fast and convenient thanks to the keyless X-LOCK system. X-LOCK flaps discs also fit standard angle g more→rinders.• Excellent Lifetime• X-LOCK X571 Best for Metal Flap Disc offers an excellent lifetime on metal applications&bu
 |
These Makita Tungsten Carbide Grit Blades for X-LOCK grinders are suitable for cutting a variety of materials including plaster board, PVC, FRP & copper. Supports the X-LOCK system which allows for sa more→fe and easy disc installation and removal. Specifications • Diameter: 125 mm • Fitting: X-LOCK • Thickness: 2mm • Pack Quantity: 1 • TC Grit: 30/40 Features & Benefits • Suitable for cutting a variety of materials including plaster board, PVC, FRP & copper • Supports the X-LOCK system which allows for safe and easy disc installation and removal
 |
Professionals Value Angle Grinders For Their Ability To Cut Tough Materials Like Concrete, Stone And Metal. With The Expert Carbide Multi Wheel This Wonderful Tool Can Be Even More Versatile, Efficien more→tly Cutting All Kinds Of Softer Materials Such As Wood, Plastic And Modern Composites. With The Expert Carbide Multi Wheel, Your Angle Grinder Becomes Even More Versatile. For Many Tradesmen, It May Be The Only Power Tool They Need.Features:- Exceptional Durability Is Built In With Bosch Carbide Technology.- Advanced Steel Body Keeps Constant Speed And Depth.- Extra Strong Laser Bonding Of Carbide Grit And Steel Body.- Long Life Cutting Multiple Materials- Click It On With X-Lock – The Fastest Ac…
 |
The Multi Construction Rapido Cutting Disc provides powerful and fast cutting performance across various materials. Its special abrasive mix enables work on various materials. In addition, the thin di more→sc offers easy and fast cutting with little force exertion, less noise and minimum dust. Use this disc for cutting metal, Inox, non-ferrous metals, stone, marble and plastic. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413, FEPA and oSa. It is compatible with angle grinders.Straig
 |
Expert Diamond Pipe Cut Wheel For Longest Life Cutting & Chamfering Pipes:- There are many ways to cut and chamfer pipes, but most are time consuming and involve specialized equipment: with the EXPERT more→Diamond Pipe Cut Wheel you can get a perfect chamfered cut from your angle grinder – and this is a highly durable accessory to boot.- The perfect accessory for pipe cutting, it doesn't shatter if dropped, produces no chemical smell or extra dust during cutting, and maintains a constant cutting depth and speed throughout its long life.Specificat
Wire & Cup Brushes207
 |
7.76Buy!
£
£
Electricalworld.com
Delivery: in United Kingdom
Report
• Suitable for use with power tools up to the maximum rated speed (4500rpm).• Shaft: ø6mm.• Contents: Brushes; ø50mm Wire Cup, ø50mm Flat Wire, ø25mm Decarbonising/C
 |
Price from £8.49
Compare prices3→Compare prices and buy Lessmann Precision End Wire Brush Pointed End 12mm 6mm Shank LES451162
The Lessmann End Brushes are fitted with a 6mm shank for cleaning and de-burring in hard to reach areas. They are ideal for the removal of paint and the cleaning of moulds and castings. Also for worki more→ng on edges and recesses and the inside of bores etc.The Lessmann Pointed End Brush With Shank has the following specification: Wire Type: Steel.Diameter: 12mm.Wire Height: 20mm.Wire Gauge: 0.30.Max Speed: 20,000/rpm.Addi
 |
Price from £4.00 up to £4.49
Compare prices5→Compare prices and buy Bosch 0.3mm Crimped Steel Wire Wheel Brush 50mm 6mm Shank 2608622112
The Wire Wheel provides a good fine surface finish. Fitted with crimped wire for light- to medium-duty cleaning applications on small surfaces, it is ideal for removing annealing colour on welded seam more→s. The wire wheel is suitable for cleaning work at high circumferential speeds on smaller steel surfaces, edges or in grooves. Moreover, it is suitable for removing rust, roughing, mat sanding and paint stripping. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. It is intended for use with drills with 6-mm shank.Wire …
 |
Price from £4.49 up to £5.77
Compare prices4→Compare prices and buy Sealey Flat Wire Brush 100mm 6mm Shank SFB100
Suitable for use with power drills. Ø6mm Shaft. Crimped brassed steel filaments add extra rigidity and cleaning power. Features & Benefits: • Suitable for use with power drills. Ø6mm Shaft. • Crimped more→brassed steel filaments add extra rigidity and cleaning power. • Model No. SFB100 Specifications: Model No SFB100 Brand: Sealey Diameter: Ø100mm Maximum Speed: 4500rpm Nett Weight: 0.12kg Shaft Diameter: Ø6mm
 |
Price from £8.95
Compare prices3→Compare prices and buy Lessmann 0.35 Steel Wire DIY Cup Brush 75mm 6mm Shank LES43013307
The Lessmann DIY Cup Brush is fitted with 6mm shank. It has been designed for working on large surfaces, generally for the removal of rust, paint, dirt or scale, and for polishing. 430.123.07: Wire: 0 more→.35 Steel, Diameter: 50mm.430.133.07
 |
Price from £5.49
Compare prices4→Compare prices and buy Bosch 0.3mm Crimped Steel Wire Wheel Brush 75mm 6mm Shank 2608622007
The Wire Wheel provides a good fine surface finish. Fitted with crimped wire, it is ideal for light-to-medium duty cleaning applications on small surfaces. The Wire Wheel is intended for removing anne more→aling colour on welded seams and is suitable for cleaning work on smaller stainless steel, aluminium or non-ferrous metal surfaces, on edges and in grooves. It is also suitable for removing rust, roughing, mat sanding, texturing and paint stripping. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results. It is intended for …
 |
Price from £3.27 up to £5.36
Compare prices5→Compare prices and buy Draper Hollow Cup Brassed Steel Wire Brush 50mm 6mm Shank
This wire cup brush is designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces. The bristles are made from hardened dipped brassed steel wire, which giv more→es a high level of durability and resistance to oxidation. The brush is strong enough to provide reliable performance, and the crimping is flexible to tackle recessed areas and irregular surfaces. The cup shape works flat to the surface to cover a large surface area. Fitted with a non-slip 6.35mm hex shank. Compatible with most drill drivers and drills with a 13mm chuck. Conforms to EN1083-1 and EN1083-2 Contents: 1 x Brassed Steel Crimped Wire Cup Brush, 50mm Specifications: Diameter: 50mm …
 |
Price from £3.74 up to £5.99
Compare prices5→Compare prices and buy Draper Brassed Wire Wheel Brush 100mm 6mm Shank 41428
This wire wheel brush is designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces. The bristles are made from hardened dipped brassed steel wire, which g more→ives a high level of durability and resistance to oxidation. The brush is strong enough to provide reliable performance, and the crimping is flexible to tackle recessed areas and irregular surfaces. The wheel shape is designed to work perpendicular to the surface, making it ideal for smaller and tighter areas. Fitted with a non-slip 6.35mm hex shank. Compatible with most drill drivers and drills with a 13mm chuck. Conforms to EN1083-1 and EN1083-2 Contents: 1 x Brassed Steel Crimped Wire Wheel …
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
