Makita 3708F
Diamond Core Bits & Milling Cutters1654
 |
For veining, panelling, 'V' grooving, bevelling & chamfering. Specifications • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Overall Length Metric: 56 • Bearin more→g Dia Metric: 12.7 • Angle: 60
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 25 • Overall Length Metric: 68
 |
Trend Professional 1/4in shank bearing guided pierce and trim cutter - 6.3mm diameter for laminate work 6.3mm diameter X 18mm cutting length pierce and trim cutter for flush cutting laminated apertur more→es cleanly. 1/4in shank and 18mm cutting range; ideal for smaller routers and thinner materials allowing easy control. Cutter has a piercing tip to drill through the laminate and run against the work to make the cut in one go for fast, efficient and clean cutting. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 18 • Overall …
 |
Tungsten carbide cutting edges, suitable for DIY and professional use. Supplied with 2 bearings (9.5 & 12.7mm) to enable use as either ovolo or rounding over bits. The guide bearing can follow complex more→and intricate shapes and the cutters are suitable for use on softwoods, hardwoods, MDF and plywood. Shank: 1/4in. Features: With two bearings (9.5 and 12.7mm) to enable use as Ovolo or rounding over bit TCT TCT Specifications: Dimensions: H:12.0 x W:2.0 x D:5.5 cm Colour: Multi Guarantee:5 years Material: Tungsten Carbide Model Number: FAIRB112
 |
Useful for bevelling thick timbers. Certain sizes can be used for jointing, boxes, pilasters and carcassing. For full bevels, template should be fitted to component. Specifications • Shank D more→iameter: 1/2 • Dia Metric: 26 • Dia2 Metric: 12.7 • Cut Length Metric: 35 • Overall Length Metric: 84.5 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Angle: 80
 |
Drill, countersink, and counterbore in one step with the Stanley Countersinks. Built with sturdy materials, the STA62508 is a reliable companion, ready to tackle challenges in both workshop and job si more→te environments. Its ergonomic design prioritizes user comfort during extended use, providing a secure grip and precise control. From woodworking to various applications, this tool empowers you to achieve exceptional outcomes. Its versatility positions it as an indispensable asset for tackling a wide range of challenges. Features & Benefits • Complete two jobs in one • For use with STA62380-XJ Flip and Drive connector • For use in hard and soft wood, composite board and MDF Specifications …
 |
Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or mill lateral slots. All aluminium tooling should more→be used with a coolant, wax stick or lubricant. Material should be securely clamped. Ideal for recessing and slotting extrusions. HSSE is a special grade for machining the most abrasive anodised finishes. Specifications • Shank Diameter: 8 mm • Dia Metric: 6 • Cut Length Metric: 14 • Overall Length Metric: 60 • Type or Grade: Up-cut
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/4 • Dia Metric: 20 • Dia Imperial: 25/32 • Cut Length Metric: 20 • Overall Length Metric: 53
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
