Makita DRT50ZJ
Diamond Core Bits & Milling Cutters556
 |
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 1/2 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 25.4 • Cut Length Imperial: 1 • Overall Length Metric: 76
 |
Trend Craft Pro 1/4in shank straight router cutter - 3/8in diameter Two Flute Carbide tips Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber ba more→sed materials. 9.5mm wide X 31.8mm cutting depth with bottom cut feature for increased diversity including medium duty morticing. Matched 3/8in imperial diameter, for use with matched fit to imperial dimensions for precise fitting, 1 1/4in cut depth for deeper grooving, slotting and morticing in small furniture and light joinery work. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K'mark shank …
 |
These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers. Generally HSS more→cutters are slightly less expensive than their TC grades, but can be more suitable for certain applications. Suitable for general grooving and rebating. Specifications • D=1/4 inch • D=6.3 mm • C=16 mm • OL=48 mm • Shank Diameter=1/4 inch
 |
High quality 3-flute countersink bit for deburring, chamfering and countersinking. A finely-tuned material elasticity provides for great durability. Perfect chip removal and a low tilt risk ensure ple more→asant working. Cutting section as per DIN 335-C, 90° with 3 cutters. ¼" hexagon, suitable for holders with take-up as per DIN ISO 1173-D 6.3. Features and Benefits • Hex shaft for very good power transfer • Finely-tuned material elasticity for great durability • Very good centring properties • Perfect chip removal • Precise return movement Contents 846 3-flute Countersink Bit, 10.40 x 34 mm
 |
Clarkson 01PM/03PM standard series multi flute end mills. Made from M42 High Speed Steel with 8% cobalt. Sizes 2.0mm - 20.0mm: Four Flutes Sizes 21.0mm - 38.0mm: Six Flutes Sizes 40.0mm - 50.00mm: Eig more→ht Flutes BS 122/4. Specifications • Milling Diameter: 20mm • Shank Diameter: 16mm • Length of Cut: 38mm • Overall Length: 83.5mm • Square End Helix Angle: 30° Features and Benefits • Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Multidirectiona
 |
Having two tungsten carbide cutting edges, these cutters are suitable for professional use. This cutter is ideal for fast cutting applications on MDF, softwoods, hardwoods and plywood. Shank: 1/4in. F more→eatures: For grooving, rebating and mortising TCT TCT Specifications: Dimensions: H:15.0 x W:1.9 x D:5.5 cm Colour: Multi Guarantee:5 years Material: Tungsten Carbide Model Number: FAIRB214
 |
Single fluted Tungsten Carbide straight cutter for fast free cutting. Single flutes should be chosen where speed and clearance rates are more important than the finish. Depth of cut should not exc more→eed cutter diameter. Specifications • Shank Diameter: 1/4 • Dia Metric: 1.5 • Cut Length Metric: 6 • Overall Length Metric: 43
 |
Trend C005X1/2TC CraftPro Two Flute Cutter 6mm Diameter x 16mm Cut
The Trend C005X1/2TC has a microgranular TC tip ensuring the perfect sharpness. It has a diameter of 6mm, 1/2 inch shank and a more→working depth of 16mm.
Features:
- VERSATILE 2-FLUTE STRAIGHT CUTTERS: Designed for multiple routing tasks like edge trimming, grooving, and rebating; delivers high-quality finishes at slower feed speeds due to limited waste clearance
- TUNGSTEN CARBIDE TIPPED: 2.0mm micro-granular extra-hard tips for prolonged sharpness and cutter durability. Ideal for cutting softwood, hardwood, and man-made timber boards
- PTFE NON-STICK COATING: Its PTFE non-stick coating reduces friction, minimises resin build-up
The Trend C005X1/2TC has a microgranular TC tip ensuring the perfect sharpness. It has a diameter of 6mm, 1/2 inch shank and a more→working depth of 16mm.
Features:
- VERSATILE 2-FLUTE STRAIGHT CUTTERS: Designed for multiple routing tasks like edge trimming, grooving, and rebating; delivers high-quality finishes at slower feed speeds due to limited waste clearance
- TUNGSTEN CARBIDE TIPPED: 2.0mm micro-granular extra-hard tips for prolonged sharpness and cutter durability. Ideal for cutting softwood, hardwood, and man-made timber boards
- PTFE NON-STICK COATING: Its PTFE non-stick coating reduces friction, minimises resin build-up
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
