Makita GS5000 110V
Cutting Discs258
 |
The Multi Construction Rapido Cutting Disc provides powerful and fast cutting performance across various materials. Its special abrasive mix enables work on various materials. In addition, the thin di more→sc offers easy and fast cutting with little force exertion, less noise and minimum dust. Use this disc for cutting metal, Inox, non-ferrous metals, stone, marble and plastic. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413, FEPA and oSa. It is compatible with angle grinders.Straig
 |
The X571 Best for Metal is compatible with angle grinders. The X571 Best for Metal has an excellent lifetime when grinding welding seams and coarse sanding metal surfaces. Its high-quality zirconia al more→umina/semi-fria
 |
• For light grinding work. Thanks to the flexibility of the disc, it is ideally suited to working on curved surfaces. Other advantages of the disc: less vibration and noise development, cool grin more→ding (less heat discolouration)
 |
The Expert for Metal Cutting Disc provides powerful cutting performance in metal with maximum safety. The disc is made of premium aluminium oxide with advanced phenol resin, which copes with demanding more→applications while delivering good results. Moreover, the disc's precision-manuf
 |
These Makita Tungsten Carbide Grit Blades for X-LOCK grinders are suitable for cutting a variety of materials including plaster board, PVC, FRP & copper. Supports the X-LOCK system which allows for sa more→fe and easy disc installation and removal. Specifications • Diameter: 125 mm • Fitting: X-LOCK • Thickness: 2mm • Pack Quantity: 1 • TC Grit: 30/40 Features & Benefits • Suitable for cutting a variety of materials including plaster board, PVC, FRP & copper • Supports the X-LOCK system which allows for safe and easy disc installation and removal
 |
Cuts materials that angle grinders previously couldn’tProfess
 |
DeWalt Extreme Diamond metal cutting discs are intended as a direct replacement for bonded abrasive cutting discs. They are suitable for use on steel, stainless steel, cast iron, rebar, sheet metal, a more→luminium and non-ferrous metals. Specifications • Diameter: 125 mm • Thickness: 1.3 mm • Bore Size: 22.23 mm Features and Benefits: • Economical: 1000+ cuts can be achieved with one disc • Increased safety: solid steel body greatly reduces risk of disc breakage • No shelf life: does not deteroriate over time (in proper storage conditions) • Diameter retention: each disc maintains its original diameter until the last cut • Less dust: substantial reduction …
 |
The X551 Expert for Metal has an impressive material removal rate on metal surfaces. The zirconia alumina and semi-friable aluminium oxide abrasive grit blend delivers a brilliant removal rate and lif more→etime on metal applications. Furthermore, its highly robust X-cloth with stable backing ensures durability and steady performances on tough surfaces. The grit is bonded using fully synthetic resin on X-cloth for optimal sanding behaviour. It is intended for deburring and welding preparation on carbon steel, mild steel, aluminium, non-ferrous metals and cast iron. It is also ideal for removing discolouration, stock and surface imperfections. It is available in angled or straight options on fibreglass …
Abrasive Wheels & Belts5136
 |
11.08Buy!
£
£
Idealo.co.uk
Delivery: in United Kingdom
Report
Metal / Sanding Form Round / Disc Diameter 75 mm
 |
Lasts up to 100x longer than standard sandpaperSmall but tough sanding jobs to remove old material and prepare surfaces for working can be almost impossible with conventional sanders or by hand. Even more→if you can reach the surface, these jobs destroy sandpaper. With the Expert Sanding Plate however, you can reach corners and sand difficult materials with your oscillating multitool.Using Bosch Carbide Technology, grits of the hardest metal are robustly fixed to the surface. This sharp grit remains fully effective over its long lifespan because you can clean it with a solvent. The Expert Sanding Plate is designed for multiple materials and users.The coarse, open grains of the RT2 (grit size 20) …
 |
3.56Buy!
£
£
Idealo.co.uk
Delivery: in United Kingdom
Report
Sandpaper Set / Metal / Quantity 10 Piece / Disc Diameter 125 mm
 |
The Pencil Brush provides a good coarse surface finish. Fitted with knotted wire, it is ideal for medium-duty cleaning applications on small steel surfaces. Its shape makes it ideal for cleaning work more→in very hard-to-reach areas such as in corners and the inside of pipes and profiles. The brush is also suitable for removing heavy rust and varnish as well as stripping paint. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results It is intended for use with drills with a 6-mm shank.Pencil brush – knotted wireIdeal for wo…
 |
Compatible with Festool sanders, this polishing sponge offers exceptional softness and flexibility, ensuring smooth and uniform finishes on various surfaces. With a diameter of 150mm and a thickness o more→f 30mm, this sponge provides ample coverage and stability during use. Designed for ease of use, this polishing sponge is quick and simple to attach and remove from Festool sanders, allowing for efficient changes between tasks. Its versatile design caters to both professional craftsmen and hobbyists, providing the precision and consistency needed to achieve flawless finishes every time. Features & Benefits • Very fine (honeycombed) • For removing polish residues on the painted surface • …
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
