Makita PJ7000J
Diamond Core Bits & Milling Cutters548
 |
Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges. Corners will require final trimming square with a hand chisel or a corner chisel. S more→pecifications • Shank Diameter: 1/4 • Dia Metric: 15.9 • Dia Imperial: 5/8 • Cut Length Metric: 19 • Overall Length Metric: 51
 |
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 1/4 • Dia Metric: 7.5 • Dia Imperial: 9/32 • Cut Length Metric: 19 • Cut Length Imperial: 3/4 • Overall Length Metric: 51
 |
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the more→most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications • Shank Diameter: 1/4 • Dia Metric: 12 • Dia Imperial: 15/32 • Cut Length Metric: 19 • Overall Length Metric: 58
 |
Regular length end mill with 4 flutes
 |
Having two tungsten carbide cutting edges, these cutters are suitable for professional use. This cutter is ideal for fast cutting applications on MDF, softwoods, hardwoods and plywood. Shank: 1/4in. F more→eatures: For grooving, rebating and mortising TCT TCT Specifications: Dimensions: H:12.0 x W:1.4 x D:5.5 cm Colour: Multi Guarantee:5 years Material: Tungsten Carbide Model Number: FAIRB25
 |
Trend Craft Pro 1/4in shank bearing guided flush trimming cutter - 12.7mm diameter Two Flute Carbide tips. Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic lamina more→tes and veneers. 12.7mm diameter X 9.5mm cutting depth shank mounted bearing guided trimmer. Ideally suited to flush trim laminate and veneer work. 1/4in shank for smaller routers and easy control for hand held trimming use on curved and straight edge work or to follow templates for shallow rebating. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices.&hell
 |
Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cutter breakage. Specifications • Shank Diameter: more→1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 32 • Cut Length Imperial: 1 1/4 • Overall Length Metric: 77.5 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Angle: 90
 |
Manufactured from special tool steel, hardened and tempered to 55HRC for long life. The 90° head incorporates a single finely ground fast cutting edge. Shank 6mm diameter. Suitable for use with h more→and or power drills on hard or softwood and plastics. Display packed.
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
