Metabo FSX 200 Intec 609225500
Cutting Discs164
 |
The Faithfull Aluminium Oxide Flap Discs are suitable for heavy-duty applications. The 72 flaps enables fast stock removal with minimal risk of damage through gouging or discolouration. A lightweight more→disc design reduces operator fatigue, and is easier to control, providing better quality and consistency of your surface finish. The layered disc is cooler, and quieter than typical grinding/abrasi
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
 |
The Makita Z60V Thin Stainless Steel Cutting Discs are precision-engin
 |
Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thi more→ckness permit fine cutting where necessary on stainless steel and high grade metals. They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's …
 |
Reliable Cutting - The Standard for Metal Cutting Disc cuts reliably through metal. Its aluminium oxide disc is designed for general use with metal. Use this disc for cutting metal. It is compatible w more→ith angle grinders. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Reliable Cutting in Metal • Standard for Metal Cutting Disc cuts reliably through metal • The aluminium oxide disc is designed for general use with metal Specifications Specification: A 30 S BF Diameter: 125mm Thickness: 2,5mm Thickness 2: 2,5mm Bore size: 22,23mm Bore diameter: 22,23mm
 |
Excellent Lifetime - The X-LOCK X571 Best for Metal Flap Disc offers an excellent lifetime on metal applications. Its high-quality zirconia alumina/semi-fr
 |
General-purpose flat cutting disc recommended for use with Sealey and other leading makes of grinding and cutting power tools. Suitable for cutting stainless steel. Features & Benefits: • General-pur more→pose flat cutting disc recommended for use with Sealey and other leading makes of grinding and cutting power tools. • Suitable for cutting stainless steel. • Model No. PTC/125CT Specifications: Model No PTC/125CT Bore: Ø22mm Brand: Sealey Disc Size: Ø125 x 1.6mm Nett Weight: 0.04kg
 |
Makita's A36N grinding discs were designed to out-perform all other aluminium grinding discs on the market. The unique bond structure is a combination of grit impregnated with a substance called stear more→ic acid. This specially formulated mix ensures lubrication is present between the grit and work surface at raised emperatures. Due to the low melting point of aluminium, problems can arise once a grinding surface reaches melting point. The useful substance present within the bond structure acts as a lubricant to reduce friction between grit and workpiece. Lower friction = less heat build up. By reducing the heat element, there is less possibility of melted aluminium sticking to the grinding disc …
Abrasive Wheels & Belts2145
 |
Contains 180 Grit and 280 Grit abrasive buffs. For precise and delicate material removal on metal, glass, wood and plastic. The flexible material enables to work on tight and irregularly shaped areas. more→These buffs can be used with mandrels 402 as well as SC402. Specifications • Shank diameter: 3.2mm • Working diameter: 25.0mm • Grit: 180 / 280 • Maximum RPM: 20.000 1/min Contents • 180 Grit Abrasive Buff • 280 Grit Abrasive Buff
 |
12.95Buy!
£
£
Idealo.co.uk
Delivery: in United Kingdom
Report
Quantity 1 Piece / Black / Sanding Form Rectangular
 |
Aggressive Cleaning on Metal - The X-LOCK Heavy for Metal Cup Brush, Knotted Wire provides an aggressive cleaning performance. It is fitted with knotted wire for heavy-duty cleaning applications on me more→dium-to-large steel surfaces. It is suitable for use with X-LOCK angle grinders. Changing brushes is fast and convenient thanks to the keyless X-LOCK system. Click it on with X-LOCK – the fastest accessory-chang
 |
Festool's Granat Net abrasive is the perfect solution for machining materials which produce a large quantity of dust. The open net structure enables dust extraction across the entire surface – for wor more→king cleanly, a high material removal capacity and a long service life of the abrasive. Granat Net is available in five different formats which cover a wide range of different applications. Convenient and safe: Resistant mesh structure with high tear resistance and edge stability – for perfect results right down to the smallest detail, without scratches and without rework. Achieve ideal results more quickly: The perfect solution for machining materials which produce a large quantity of dust. The…
 |
Standard Applications - The Sanding Plate With hook-and-loop-T
 |
Up to 3x faster than a benchmark Bosch disc - Professional metalworkers take pride in the beauty of a finished surface, but surface finishing can be a time consuming job. By minimising the process ste more→ps required to achieve a perfect finish, the EXPERT SCM Flap Disc ensures efficiency without compromising on quality. Part of the Bosch Surface Structure range of advanced abrasives, the Bosch EXPERT Surface Conditioning Material Flap Disc combines the toughness of aluminium oxide grits with a 3D non-woven structure to give a fast cutting SCM which does not smear. These discs are ideal for refining #36 fiber disc scratches on mild steel. Offering time savings to the professional by saving process …
 |
11.56Buy!
£
£
Idealo.co.uk
Delivery: in United Kingdom
Report
Sanding Form Triangular / Disc Diameter 94 mm
Important!
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Grinders & Polishers should be confirmed with the online store manager directly before purchase.
