Metabo KFM 18 LTX 3 RF 601754840
Diamond Core Bits & Milling Cutters1347
 |
These two wing Tungsten Carbide Tipped slotting cutters are ideal for grooving and rebating operations. A 12.7mm diameter bearing is supplied with every cutter giving a 9.5mm groove depth. Depth of cu more→t can be changed by purchasing alternative bearing sizes. Easy to set-up and use. Hex key is supplied. N.B. The grooving section of this tool cannot be detached from the shank. Specifications • Shank Diameter: 1/4 • Dia Metric: 31.8 • Dia Imperial: 1 1/4 • Cut Length Metric: 8 • Cut Length Imperial: 5/16 • Overall Length Metric: 67 • Bearing Dia Metric: 12.7 • Rebate Metric: 10
 |
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwoo more→d, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks, for quick identification. Produces a smooth round over profile, or an ovolo mould with quirks. Includes extra bearing B127A for round over effect. Specifications • D=1 inch • D=25.4 mm • B=9.5 mm • R=6.3 mm • OL=62 mm • Shank Diameter=8 mm
 |
Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. Specifications • Shank Diameter: 8 mm • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 64.5 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 6.3 • Radius 1 Imperial: 1/4
 |
Clarkson 01PM/03PM standard series multi flute end mills. Made from M42 High Speed Steel with 8% cobalt. Sizes 2.0mm - 20.0mm: Four Flutes Sizes 21.0mm - 38.0mm: Six Flutes Sizes 40.0mm - 50.00mm: Eig more→ht Flutes BS 122/4. Specifications • Milling Diameter: 11mm • Shank Diameter: 12mm • Length of Cut: 19mm • Overall Length: 66.5mm • Square End Helix Angle: 30° Features and Benefits • Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Multidirectiona
 |
HSS Three Flute 90° Countersink. Specifications • Nominal Diameter: 8.0mm • Shank Diameter: 6mm • Overall Length: 50mm • Capacity: 2.0mm - 8.0mm Features and Benefits • P more→roduces countersinks for cap screws • Self centering and chatter free • Can be used for chamferring • DIN 335C
 |
These cutters are self-guiding and can be used to produce rebates, lap joints, tongues and rebated corners. When using bearing Ref. B95A make two passes when a full depth of cut is required. Specif more→ications • Shank Diameter: 8 mm • Dia Metric: 35 • Dia Imperial: 1 3/8 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 63 • Bearing Dia Imperial: 3/8
 |
Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Specifications • Shank Diameter: 1/4 • Dia Metric: 27.5 • Dia Impe more→rial: 1 • Cut Length Metric: 13 • Overall Length Metric: 59 • Angle: 45
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications • Shank Diameter: 1/4 • Dia Metric: 3 more→• Cut Length Metric: 11 • Overall Length Metric: 59
Important!
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Routers & Trimmers models should be checked with manager of online store immediately before purchase.
