Metabo W 9-115 600354000
Cutting Discs354
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
 |
Reliable Cuts - The Standard for Universal Diamond Cutting Disc provides reliable cuts in universal building materials. Its optimised diamond matrix delivers solid results thanks to the disc's high-qu more→ality standards. Bosch's diamond competence centre in Switzerland ensures these standards by enabling consistent quality time and again. Use this disc for cutting building materials such as concrete and masonry. It is compatible with angle grinders. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Reliable Cuts in Universal Building Materials • Standard for Universal Diamond Cutting Disc provides reliable cuts in universal building materials • Optimised …
 |
Lasts up to 50x longer than a Bi-Metal blade in tough materials - Cutting thin sheet metal and thin wall pipes is a tough job, but with a good recip saw blade you can manage: the real problems start w more→hen you cut stainless steel. This tough, high-alloy steel is an obstacle to construction or renovation workers and destroys blades. Bosch Carbide Technology consigns these problems to the past. The EXPERT ‘Thin Tough Metal’ is a leap forward in recip saw blade development, where the hardest metal is integrated into a tooth design optimised for steel sheets and pipes. The teeth are ground to a fine geometry that allows even thin sheets of stainless steel to be cut smoothly. Ideal for metal workers, plu…
 |
• General-purpose flat cutting disc recommended for use with Sealey and other leading makes of grinding and cutting power tools.• Pack of 50.General-purp
 |
• Zirconium flap disc for descaling, derusting, weld preparation, weld cleaning and general surface preparation.• More durable than normal sanding discs.• Abrasive flaps are attached to rigid disc wit more→h epoxy adhesive - does not require backing pad.• Depressed centre disc suitable for electric and air tools.• Size/Bore: ø115/22mm.
 |
CK850 blades are described as having one of the Fastest Tile Cuts EverFeatures:- Marcrist diamond products comply with every known safety standard worldwide- Titanium coated diamonds provide self cool more→ing and self sharpening cutting edge- Armoured centre for blade strength beyond belief (Patented)- Precision engineered core, hardened, ground, balanced and tensioned- Noise suppression for semi silent operation (Patented)- Ulta thin diamond edge guarantees lighting fast cutting- Segments are formed under vacuum and extreme pressure and fused to the corde. This results in a extreme bond homogenity and adhesion for outstanding performance and safetyMaterials
 |
• Zirconium flap disc for descaling, derusting, weld preparation, weld cleaning and general surface preparation.• More durable than normal sanding discs.• Abrasive flaps are attached to rigid disc wit more→h epoxy adhesive - does not require backing pad.• Depressed centre discs suitable for electric and air tools.• Size/Bore: ø115/22mm.
 |
Fast Cuts - The Expert for Inox Rapido Cutting Disc performs fast cuts in Inox with maximum safety. The disc is made of premium aluminium oxide with functional fillers and additives in a modern phenol more→resin matrix. In addition, the thin disc is free of ferrous, sulphurous and chlorinated fillers. Maximum work safety is enabled thanks to the precision-manuf
Wire & Cup Brushes190
 |
Price from £4.49
Compare prices3→Compare prices and buy Bosch 0.3mm Crimped Steel Wire Brush 50mm 6mm Shank 2608622006
Fine Finish on Steel - The Wire Cup Brush delivers an excellent, fine-surface finish. It features crimped wire for light-to-medium
 |
Price from £3.66 up to £5.53
Compare prices5→Compare prices and buy Draper Rotary Wire Brush, 6 x 100m
Brassed crimped steel wire with 6mm diameter shank. Display packed.
 |
Price from £3.49 up to £3.68
Compare prices5→Compare prices and buy Sealey Flat Top Decarbonising Brush 25mm
• Flat trimmed brush with brassed and crimped filaments for extra rigidity.• ø6 x 26mm Shaft.• Trim Length/ø: 28/25mm.Flat trimmed brush with brassed and crimped filaments for extra rigidity more→. ø6 x 26mm Shaft.• Flat trimmed brush with brassed and crimped filaments. • ø6 x 26mm Shaft. • Trim Length/ø: 28/25mm. • Model No. VS1803Technical Specification:N
 |
Price from £24.99 up to £39.99
Compare prices6→Compare prices and buy Bosch 0.5mm Crimped Steel Wire Cup Brush 100mm M14 Thread 1608614011
Extra-Fine Finish - The Clean for Metal Wire Cup Brush provides an extra-fine surface finish. The cup brush is fitted with crimped wire for light- to medium-duty cleaning applications. Ideal for use o more→n metal, it is suitable for cleaning work on medium to large steel surfaces, such as removing coatings, rust and cleaning formwork boards and facings. The cup brush is also suitable for roughing, matt sanding and paint stripping. It is intended for use with angle grinders with an M14 thread. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, …
 |
Price from £8.95
Compare prices2→Compare prices and buy Lessmann 0.35 Steel Wire DIY Cup Brush 75mm 6mm Shank LES43013307
The Lessmann DIY Cup Brush is fitted with 6mm shank. It has been designed for working on large surfaces, generally for the removal of rust, paint, dirt or scale, and for polishing. 430.123.07: Wire: 0 more→.35 Steel, Diameter: 50mm.430.133.07
 |
Price from £4.00 up to £5.16
Compare prices5→Compare prices and buy Draper Hollow Cup Wire Brush, 75mm
Brassed crimped steel wire with 6mm diameter shank. Display packed.
 |
Price from £16.99 up to £20.95
Compare prices6→Compare prices and buy Bosch X Lock Knotted Stainless Steel Wire Cup Brush 75mm X-Lock 2608620729
Aggressive Cleaning on Inox - The X-LOCK Heavy for Inox Cup Brush, Knotted Wire provides an aggressive cleaning performance. It is fitted with knotted wire for heavy-duty cleaning applications such as more→removing heavy rust, paint or varnish on medium-to-large surfaces. It is suitable for use with X-LOCK angle grinders. Changing brushes is fast and convenient thanks to the keyless X-LOCK system. Click it on with X-LOCK – the fastest accessory-chang
 |
Price from £3.49
Compare prices2→Compare prices and buy Faithfull Crimped Wire Wheel Brush 75mm 6mm Shank WBS75C
This Faithfull crimped steel Wire Circular Brush is designed for light to medium-duty applications such as cleaning metal surfaces prior to welding or painting. Fitted with a 6mm (1/4in) shank and des more→igned to operate with power tools up to a maximum of 4,500/min. Shaft: 6mm (1/4in). Wire: 0.30mm crimped steel wire. Conforms to ISO 9001 and DIN EN1083-1 and 2 standards.Diame
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
