Metabo W 9-115 Quick 600371000
Cutting Discs314
 |
The X Lock system makes it easier to swap out angle grinder accessories than ever before. Simply pull the X Lock lever on the machine to release any attached accesory, and press the new accessory into more→place until it locks with an audible click. There is no need for additional tools or detachable components and X Lock accessories are mounted safely and securely in a matter of seconds. These Makita X Lock diamond cutting discs are suitable for cutting concrete, granite and marble. Features & Benefits • X Lock mechanism allows accessories to be attached without a nut, flange or spanner • No need to worry about missing parts or tools • X Lock accessories can be swapped over in seconds …
 |
Reliable Cuts - The Standard for Universal Diamond Cutting Disc provides reliable cuts in universal building materials. Its optimised diamond matrix delivers solid results thanks to the disc's high-qu more→ality standards. Bosch's diamond competence centre in Switzerland ensures these standards by enabling consistent quality time and again. Use this disc for cutting building materials such as concrete and masonry. It is compatible with angle grinders. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Reliable Cuts in Universal Building Materials • Standard for Universal Diamond Cutting Disc provides reliable cuts in universal building materials • Optimised …
 |
Lasts up to 50x longer than a Bi-Metal blade in tough materials - Cutting thin sheet metal and thin wall pipes is a tough job, but with a good recip saw blade you can manage: the real problems start w more→hen you cut stainless steel. This tough, high-alloy steel is an obstacle to construction or renovation workers and destroys blades. Bosch Carbide Technology consigns these problems to the past. The EXPERT ‘Thin Tough Metal’ is a leap forward in recip saw blade development, where the hardest metal is integrated into a tooth design optimised for steel sheets and pipes. The teeth are ground to a fine geometry that allows even thin sheets of stainless steel to be cut smoothly. Ideal for metal workers, plu…
 |
Makita's Diamak Diamond Cutting Discs with segmented rim. The segmented blade is designed to cut most masonry materials including Masonry, brick, block, light concrete, sandstone, limestone and slate. more→Specifications • Diameter: 115mm • Bore: 22.23mm • Segment Height: 7mm • Pack Quantity: 1
 |
• Zirconium flap disc for descaling, derusting, weld preparation, weld cleaning and general surface preparation.• More durable than normal sanding discs.• Abrasive flaps are attached to rigid disc wit more→h epoxy adhesive - does not require backing pad.• Depressed centre discs suitable for electric and air tools.• Size/Bore: ø115/22mm.
 |
• Zirconium flap disc for descaling, derusting, weld preparation, weld cleaning and general surface preparation.• More durable than normal sanding discs.• Abrasive flaps are attached to rigid disc wit more→h epoxy adhesive - does not require backing pad.• Depressed centre disc suitable for electric and air tools.• Size/Bore: ø115/22mm.
 |
A pack of hardened and tempered diamond blades offering a selection of different cuts and finishes. The continuous rim provides a smooth finish and is designed for use on ceramic and natural stone til more→es. The segmented rim creates a faster cut and is an effective general-purpose blade for use on concrete, bricks, stone, granite and marble, whilst the continuous turbo rim provides a fast cut and smooth finish on granite, marble and stone.
Wire & Cup Brushes281
 |
Price from £5.95 up to £6.70
Compare prices5→Compare prices and buy Makita D-66070 Wire Brush Set for Drill (3 Piece)
Makita D-66070 Wire Brush Set for Drill (3 Piece)
The Makita D-66070 is a 3 Piece Wire Brush Set designed to be used with power tools to remove rust and paint from metal objects.Feature
more→> - Cup type: light duty for removing coatings, rust, and cleaning. For flat or irregular surfaces/edges.
- Wheel type: light duty for removing coatings, rust, and cleaning. For flat or irregular surfaces/edges.
- End type: light duty for working on hard to reach areas (pipes and profiles).
Specificatio
- Part Number: D-66070
- Number of Pieces: 3
The Makita D-66070 is a 3 Piece Wire Brush Set designed to be used with power tools to remove rust and paint from metal objects.Feature
more→> - Cup type: light duty for removing coatings, rust, and cleaning. For flat or irregular surfaces/edges.
- Wheel type: light duty for removing coatings, rust, and cleaning. For flat or irregular surfaces/edges.
- End type: light duty for working on hard to reach areas (pipes and profiles).
Specificatio
- Part Number: D-66070
- Number of Pieces: 3
 |
Price from £3.49 up to £4.01
Compare prices5→Compare prices and buy Sealey Flat Wire Brush Stainless Steel 50mm with 6mm Shaft
• Flat wire brush.• Crimped stainless steel filaments.• Shaft: ø6mm.• Diameter: ø50mm.• Maximum Speed: 4500rpm.Flat wire brush with crimped stainless steel filaments, 50mm width and a 6mm sh more→aft.• Flat wire brush. • Crimped stainless steel filaments. • Shaft: ø6mm. • Width: ø50mm. • Maximum Speed: 4500rpm. • Model No. SFBS50Technical Specification:D
 |
Price from £4.49 up to £6.39
Compare prices4→Compare prices and buy Faithfull Wire Brush Shaft Mounted 50mm x 20mm, 0.30mm Wire
This Faithfull Wire Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. It can be used in industrial power tools at higher speeds. Type Cup M more→aximum speed 12,000/min.
 |
Price from £7.49 up to £11.99
Compare prices5→Compare prices and buy Faithfull Conical Wire Brush 100Mm X M14X2 0,5Mm FAIWBTC100
Conical Knot Brush with high tensile steel wire. Ideal for work in hard-to-reach places such as edges or corners. Suitable for the removal of slag, rust, scale or even dried cement. Max. Cutting Speed more→: 12,500 rpm. Features: For use on s/less steel & heavier duty applications For use with angle grinders For use with angle grinders Maximum speed: 12,500 rpm Specifications: Dimensions: H:13.0 x W:4.0 x D:10.5 cm Colour: Multi Guarantee:5 years Material: Metal Model Number: FAIWBTC100
 |
Price from £4.95
Compare prices4→Compare prices and buy Stanley Crimped Steel Wire Wheel Brush 50mm 6mm Shank STA36020
These Stanley crimped wire wheels are ideal for cleaning and preparing surfaces. They are designed for use in drill chucks and can be used with standard corded or cordless drills. The high tensile ste more→el wire is heat treated for durability. An innovative internal holding plate construction helps to reduce wire movement for increased control and longer product lifetime. Features & Benefits • For use with electric drills • Suitable for corded and cordless machines • Ideal for cleaning and surface preparation Specifications • Wheel Diameter: 50mm • Wheel Thickness: 10mm • Shank Diameter: 6mm
 |
Price from £7.23 up to £9.11
Compare prices6→Compare prices and buy Draper Crimped Wire Cup Brush, 80mm, M14
Manufactured from 0.3mm hardened brassed steel wire. Designed for use with angle grinders. M14 thread. Display packed.
 |
Price from £8.95
Compare prices3→Compare prices and buy Faithfull Stainless Steel Crimped Wire Cup Brush 75mm M14 Thread WBC75S
Faithfull Crimped Wire Cup Brush for lighter to medium-duty applications such as cleaning metal surfaces prior to painting. Designed for use with a compatible thread angle grinder. Suitable for indust more→rial use and more specialist applications.Wi
 |
Price from £12.92 up to £16.39
Compare prices6→Compare prices and buy Draper Twist Knot Wire Cup Brush, 80mm, M14
Manufactured from 0.5mm hardened steel wire. Designed for use with angle grinders. M14 thread. Carton packed.
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
