PowerWalker VI 600 SW/Schuko 600 VA (10120079)

The diode bridges allow simultaneous charging of different batteries from one alternator, without connecting the batteries together.Even discharged, batteries remain isolated.Thus, the use of the serv more→ice battery, for example, can not download the starter battery.Diode bridges present ARGO reduced voltage drop due to the use of Schottky diodes:a low intensity, the loss will be about 0.3 V, at full capacity, 0.45 V.All models are equipped with a compensation diode allowing slightly increase the output voltage of the alternator to compensate for the loss of voltage the diode bridge.For best results, see our bridges ARGO FET diode voltage drop.Power input of the alternator.Some alternators need …

Victron PWM-LCD & USB 10A PWM solar PWM charge controller with LCD display for tracking and configuration and USB connection.Features:Liquid crystal display.For tracking and configuration.Charging out more→put.The battery can be prevented from over-discharging by connecting all loads to the charging output.This output will disconnect the load when the battery has discharged to a preset voltage.Some loads (especially inverters) are best connected directly to the battery, and the inverter remote control to the load output.A special interface cable may be required.please, refer to the manual.This option allows presetting the ON-time after twilight.Programmable battery charging algorithm.Pre-programmed …

MDS18 Replacement UPS battery kit, suitable to replace the APC RBC18 replacement battery cartridge.