Stanley FatMax FMC761B
Cutting Discs202
 |
Quantity: 1; Diameter [mm]: 125; Thickness [mm]: 2; Bore Diameter [mm]: 22.23; Supplementary Info: BETON
 |
Lasts up to 4x longer than a standard multi material diamond disc - On modern construction sites you need to cut a wide variety of hard materials, and these take their toll on tools. The EXPERT MultiM more→aterial Disc is the ideal accessory for busy construction professionals needing to cut concrete, brick, roofing tiles and reinforced concrete - because it simply keeps doing the job for longer. The high segments on this cutting disc are made from an advanced matrix of metal and diamonds, which is designed to stay razor sharp. These segments are laser-welded onto a hard steel body; and the sides are fluted to remove dust for efficiency and longevity. This mix of optimum diamond grits and advanced …
 |
Reliable Cutting - The Standard for Metal Cutting Disc cuts reliably through metal. Its aluminium oxide disc is designed for general use with metal. Use this disc for cutting metal. It is compatible w more→ith angle grinders. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Reliable Cutting in Metal • Standard for Metal Cutting Disc cuts reliably through metal • The aluminium oxide disc is designed for general use with metal Specifications Specification: A 30 S BF Diameter: 125mm Bore size: 22,23mm Thickness: 2,5mm Bore diameter: 22,23mm Thickness 2: 2,5mm
 |
Depressed Centre Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Discs wit more→h a 1.8mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They have been developed to make angle grinders more versatile in use by allowing better access in some applications. Metal cutting discs must always be presented to the workpiece at an angle of 90. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that …
 |
18.71Buy!
£
£
Electricalworld.com
Delivery: in United Kingdom
Report
• Will cut through the toughest of materials; reinforced concrete, steel and cast iron.• Laser welded segments.Will cut through the toughest of materials; reinforced concrete, steel and cast iron. Las more→er welded segments.Techni
 |
The Marcrist CK850 AkkuMAX Extreme Speed Diamond Tile Blade is engineered for rapid, precise cutting of ceramic tiles, porcelain, and other hard materials. Designed with advanced diamond technology, t more→his blade delivers exceptional cutting speed without compromising on quality. Optimised for cordless tools, the CK850 AkkuMAX is lightweight and efficient, extending battery life while ensuring consistent, high-speed performance. Its turbo-segmented design enhances airflow and cooling, reducing heat buildup and allowing for longer continuous use. Suitable For • Ceramics • Granite and Natural Stone • Marble • Natural Stone Tiles • Mosaic Tiles • Porcelain Features & …
 |
Heavy duty depressed centre grinding disc. Specifications • Grit: A24R-BF • Bore: 22.23 mm • Diameter: 125 mm • Thickness: 6 mm • Pack Quantity: 1
 |
Excellent Lifetime - The X-LOCK X571 Best for Metal Flap Disc offers an excellent lifetime on metal applications. Its high-quality zirconia alumina/semi-fr
Wire & Cup Brushes286
 |
Price from £16.95
Compare prices3→Compare prices and buy Lessmann 0.5 Steel Wire Knot Cup Brush 65mm M10 x 2.0 Thread
Knot Cup Brushes are for heavy-duty use for the preparing of metal surfaces before painting, and the removal of slag, rust, scale or concrete waste.Lessmann knotted brushes are filled with a special s more→teel wire of high tensile strength in order to meet the demands of this type of brush. Products marked with a * have a bridle fitted which an be removed to expose a further 20mm of useable wire.Diameter. 65mm.Bore. M10.Wire Gauge. 0.50. Wire Type. Steel.Max. R.P.M. 12,500.Addition
 |
Price from £16.67 up to £18.95
Compare prices4→Compare prices and buy Lessmann Crimped Steel Wire Cup Brush 80mm M14 x 2.0 Thread
The Lessmann Cup Brushes are filled with crimped wire and are ideal for working on large surfaces. They can also be used for the removal of rust, paint, dirt or scale and for polishing. A range of siz more→es and wire styles are available.Diame
 |
Price from £2.95 up to £3.58
Compare prices6→Compare prices and buy Sealey Flat Wire Brush Ø50mm with 6mm Shaft
• Suitable for use with power drills.• ø6mm Shaft.• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power drills. ø6mm Shaft. Crimped brassed stee more→l filaments add extra rigidity and cleaning power.• Suitable for use with power drills. ø6mm Shaft. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. SFB50Technical Specification:D
 |
Price from £14.95
Compare prices4→Compare prices and buy Bosch 0.5mm Knotted Conical Steel Wire Wheel Brush 100mm M14 Thread
Coarse Finish on Metal - The Heavy for Metal Bevel Brush delivers an extra-coarse surface finish. Its conical bevel brush is fitted with knotted wire for heavy-duty cleaning applications in hard-to-re more→ach areas. It is suitable for cleaning smaller steel surfaces and in grooves or on edges at high circumferential speeds. Ideal for use in metal, this brush is also suitable for removing heavy rust, paint stripping, deslagging, deburring, descaling and cleaning welding seams. It is intended for use with angle grinders with an M14 thread. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface …
 |
Price from £29.99 up to £30.95
Compare prices4→Compare prices and buy Lessmann Knot Wheel Brush 115 x 14mm M14 Bore, 0.35 Steel Wire
The Lessmann Knot Wheel Brushes are for grinders, angle grinders and stationary machines, used in the preparation and re-working of bolt fillet and butt welds. They remove scale, rust, paint, slag, ru more→bber residue and can be used for de-burring. They are filled with a special high tensile strength steel wire in order to meet the exacting requirements during use.
 |
Price from £12.95 up to £17.99
Compare prices5→Compare prices and buy Faithfull Wire Conical Brush 115Mm Xlock, Multi FAIWBCT115XL
X-LOCK Conical Wire Brush for heavy-duty applications. Twist knot brushes are suitable for the removal of slag, rust, scale or even dried cement from welds, edges and grooves. For use on steel surface more→s, aluminium and non-ferrous metal surfaces. The X-LOCK quick change system ensures a fast, reliable and effective one click change between tools when used with a compatible angle grinder. Features: X-LOCK quick change system for fast change between tools 0.5mm twist knot stainless steel wire (304) 0.5mm twist knot stainless steel wire (304) Use with steel, aluminium and non-ferrous metal surfaces Specifications: Dimensions: H:14.0 x W:2.5 x D:12.5 cm Colour: Multi Guarantee:5 years Material: Metal …
 |
Price from £7.49
Compare prices5→Compare prices and buy Bosch 0.35mm Knotted Steel Wire Pencil Brush 10mm 6mm Shank
Coarse Finish on Steel - The End Brush provides a good coarse surface finish. Fitted with knotted wire, it is ideal for medium-duty cleaning applications on small steel surfaces. Its shape makes it id more→eal for cleaning work in very hard-to-reach areas such as in corners and the inside of pipes and profiles. The brush is also suitable for removing heavy rust and varnish as well as stripping paint. It is intended for use with drills with a 6-mm shank. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results Cylindrical shank …
 |
Price from £10.40 up to £14.08
Compare prices6→Compare prices and buy Draper Crimped Wire Cup Brush, 100mm, M14
Manufactured from 0.3mm hardened brassed steel wire. Designed for use with angle grinders. M14 thread. Display packed.
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
