Stanley FatMax FMEG210K
Cutting Discs313
 |
Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in s more→tock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. SAFETY TIPS Read the manufacturer's instructions carefullyWear …
 |
Fast and Powerful Cutting - The X-LOCK Expert for Metal Cutting Disc provides powerful cutting performance in metal with maximum safety. The disc is made of premium aluminium oxide with advanced pheno more→l resin, which copes with demanding applications while delivering good results. Moreover, the disc's precision-manuf
 |
The X Lock system makes it easier to swap out angle grinder accessories than ever before. Simply pull the X Lock lever on the machine to release any attached accesory, and press the new accessory into more→place until it locks with an audible click. There is no need for additional tools or detachable components and X Lock accessories are mounted safely and securely in a matter of seconds. These Makita X Lock diamond cutting discs are suitable for cutting concrete, granite and marble. Features & Benefits • X Lock mechanism allows accessories to be attached without a nut, flange or spanner • No need to worry about missing parts or tools • X Lock accessories can be swapped over in seconds …
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
 |
The Bosch 2608900532 X-LOCK Expert Diamond Metal Wheel Cutting Disc lasts up to 100x longer than Bosch 2608603169 Cutting DiscThe Bosch 2608900532 has an exceptionally durable cutting edge using Bosch more→Diamond Technology. Cutting metals such as steel and cast iron has traditionally been tough on angle grinder discs, and many workers are familiar with the chemical smell of bonded discs burning away while they cut. With the EXPERT Diamond Metal Wheel, this smell can be consigned to the past - as can regular trips to a shop to buy new metal discs. For tradespeople and construction workers who are fed up with burning through bonded discs and money, the Bosch EXPERT Diamond Metal Wheel X-LOCK Diamond …
 |
These Makita Type 41 Pro Cutting discs are designed for fast clean cutting and are particularly suitable for use with cordless angle grinders for around 40% longer battery life over a standard cutting more→wheel. They are manufactured from high quality bonded 60G aluminium oxide for long life and are suitable for cutting steel and stainless steel. Please note generic stock image shown for illustration purposes only. Refer to the description for the specifications. Specifications • Diameter: 115mm • Thickness: 1.2mm • Bore: 22.23mm Contents • 10 Discs
 |
The Marcrist BF350 Turbo Precision Diamond Blade is a top tier cutting tool designed for fast, accurate cuts across a wide range of materials. Engineered with high-quality diamond segments and a turbo more→rim design, this blade delivers exceptional cutting speed and precision. The BF350's innovative turbo rim enhances airflow, reducing heat buildup and minimising the risk of warping or blade damage during intense use. This results in smoother, cleaner cuts with minimal chipping, even on hard materials like concrete, stone, and brick. Suitable For • General Purpose • Masonry • Concrete • Facing Bricks • Block Pavers • Dry Wall • Plasterboard • Clay Roof Tiles …
 |
Makita's Diamak Diamond Cutting Discs with segmented rim. The segmented blade is designed to cut most masonry materials including Masonry, brick, block, light concrete, sandstone, limestone and slate. more→Specifications • Diameter: 115mm • Bore: 22.23mm • Segment Height: 7mm • Pack Quantity: 1
Wire & Cup Brushes279
 |
Price from £7.49 up to £11.99
Compare prices5→Compare prices and buy Faithfull Conical Wire Brush 100Mm X M14X2 0,5Mm FAIWBTC100
Conical Knot Brush with high tensile steel wire. Ideal for work in hard-to-reach places such as edges or corners. Suitable for the removal of slag, rust, scale or even dried cement. Max. Cutting Speed more→: 12,500 rpm. Features: For use on s/less steel & heavier duty applications For use with angle grinders For use with angle grinders Maximum speed: 12,500 rpm Specifications: Dimensions: H:13.0 x W:4.0 x D:10.5 cm Colour: Multi Guarantee:5 years Material: Metal Model Number: FAIWBTC100
 |
Price from £15.95 up to £20.99
Compare prices4→Compare prices and buy Faithfull Flat Wire Brush Knot 115Xm14X2 0,35Mm S FAIWBCT115S
Flat Twist Knot Wire Brush, compatible with 115mm (4.1/2in) angle grinders with a M14 x 2 mount. Twist knot brushes are suitable for the removal of slag, rust, scale or even dried cement. Perfect for more→use on stainless steel. Standard wire brushes when used on stainless steel can contaminate and cause the material to rust. Conforms to ISO 9001, DIN EN 1083-1 and 2. Features: For the removal of slag, rust, scale or even dried cement Compatible with 115mm angle grinders Compatible with 115mm angle grinders Perfect for use on stainless steel Specifications: Dimensions: H:14.0 x W:2.5 x D:12.5 cm Colour: Multi Guarantee:5 years Material: Metal Model Number: FAIWBCT115S
 |
Price from £5.61 up to £6.95
Compare prices5→Compare prices and buy Draper Brassed Steel Crimped Wire Brush Set (3 Piece)
• Set includes a 25mm wire end brush, 50mm wire cup brush, and a 50mm wire wheel brush • Designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces • Harde more→ned dipped brassed steel wire • Strong construction with crimping action • Suitable for cleaning, deburring and surface preparation • Fitted with a non-slip 6.35mm hex shank • Compatible with most drill drivers and drills with a 13mm chuckThis set of wire brushes is designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces. The brushes are made from hardened dipped brassed steel wire, which gives a high level of durability and resistance to oxidation. …
 |
Price from £9.99 up to £11.78
Compare prices6→Compare prices and buy Sealey Brassed Steel Cup Brush Ø100mm M14 x 2mm
• Suitable for use with power tools up to the maximum rated rpm.• Crimped brassed steel filaments add extra rigidity and cleaning power.Suitable for use with power tools up to the maximum rated rpm. C more→rimped brassed steel filaments add extra rigidity and cleaning power.• Suitable for use with power tools up to the maximum rated rpm. • Crimped brassed steel filaments add extra rigidity and cleaning power. • Model No. CBC100Technical Specification:D
 |
Price from £7.49
Compare prices5→Compare prices and buy Bosch 0.35mm Knotted Steel Wire Pencil Brush 10mm 6mm Shank 2608622115
Coarse Finish on Steel - The End Brush provides a good coarse surface finish. Fitted with knotted wire, it is ideal for medium-duty cleaning applications on small steel surfaces. Its shape makes it id more→eal for cleaning work in very hard-to-reach areas such as in corners and the inside of pipes and profiles. The brush is also suitable for removing heavy rust and varnish as well as stripping paint. It is intended for use with drills with a 6-mm shank. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother surface results Cylindrical shank …
 |
Price from £10.95 up to £15.99
Compare prices4→Compare prices and buy Faithfull Flat Wire Brush 125 X 12 X 22,2Mm 0,5Mm FAIWBCT125
Circular Wire Brush, compatible with 125mm (5in) angle grinders with a 22.2 mm (7/8in) bore standard angle grinder flange plate. Twist knot brushes are suitable for the removal of slag, rust, scale or more→even dried cement. Conforms to ISO9001 and DIN EN1083-1 and 2. Max. Cutting Speed: 12,500 rpm. Features: For heavier duty applications Compatible with 125mm angle grinders with a standard flange plate Compatible with 125mm angle grinders with a standard flange plate Maximum speed: 12,500 rpm Specifications: Dimensions: H:15.5 x W:2.5 x D:13.0 cm Colour: Multi Guarantee:5 years Material: Metal Model Number: FAIWBCT125
 |
Price from £20.95 up to £24.99
Compare prices4→Compare prices and buy Faithfull Wire Cup Brush Knot 75Mm Xlock Ss FAIWBT75SSXL
X-LOCK Twist Knot Wire Brush for heavy-duty applications. Ideal for removing rust, paint and varnish. Use on stainless steel, aluminium and non-ferrous metal surfaces. Using standard wire brushes on s more→tainless steel can contaminate and cause the material to rust. The X-LOCK quick change system ensures a fast, reliable and effective one click change between tools when used with a compatible angle grinder. Wire Type: High Tensile Twisted Stainless Steel (304)Diameter: 75mmFitting: X-LOCKWire Size: 0.5mmMax. RPM: 12500 Features: Use on stainless steel, aluminium and non-ferrous metal X-LOCK quick change system for fast change between tools X-LOCK quick change system for fast change between tools …
 |
Price from £4.00 up to £4.49
Compare prices5→Compare prices and buy Bosch 0.3mm Crimped Steel Wire Wheel Brush 50mm 6mm Shank 2608622112
Fine Finish on Steel - The Wire Wheel provides a good fine surface finish. Fitted with crimped wire for light- to medium-duty cleaning applications on small surfaces, it is ideal for removing annealin more→g colour on welded seams. The wire wheel is suitable for cleaning work at high circumferential speeds on smaller steel surfaces, edges or in grooves. Moreover, it is suitable for removing rust, roughing, mat sanding and paint stripping. It is intended for use with drills with 6-mm shank. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while thinner wires deliver finer, smoother …
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
