Stanley FatMax SFMCG400M2K
Cutting Discs220
 |
Lenox MetalMax is a new alternative to abrasive cut-off discs. Its breakthrough diamond technology delivers extreme durability to help you maximise work efficiencies and reduce costs in your metal cut more→ting jobs. MetalMax blades are recommended for multiple types of metal including steel, sheet metal, stainless steel, rebar, cast iron, aluminium and non-ferrous metals. Designed for use in the same power tools as bonded abrasive discs, at the same RPMs and feed forces, MetalMax blades can be used without having to change any operating settings. Specifications • Diameter: 125mm • Thickness: 1.3mm • Arbor: 22.23mm
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
 |
Impressive Removal Rate - The X551 Expert for Metal has an impressive material removal rate on metal surfaces. The zirconia alumina and semi-friable aluminium oxide abrasive grit blend delivers a bril more→liant removal rate and lifetime on metal applications. Furthermore, its highly robust X-cloth with stable backing ensures durability and steady performances on tough surfaces. The grit is bonded using fully synthetic resin on X-cloth for optimal sanding behaviour. It is intended for deburring and welding preparation on carbon steel, mild steel, aluminium, non-ferrous metals and cast iron. It is also ideal for removing discolouration, stock and surface imperfections. The X551 Expert for Metal is …
 |
Fast Cuts in Stone - The Best for Stone Diamond Cutting Disc produces fast cuts in all types of stone. Its laser-welded diamond cutting segments with a 15-mm height are robust for rapid cuts. It featu more→res speed stripes that are integrated in the diamond segment and minimise side friction, enabling high-speed work. Furthermore, the disc´s optimised diamond matrix ensures fastest results. Use this disc for cutting all types of stone. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Fast Cuts in All Types of Stone • Best for Stone Diamond Cutting Disc produces fast cuts in all types of stone • Laser-welded diamond cutting segments (15-mm height) a…
 |
• For light grinding work. Thanks to the flexibility of the disc, it is ideally suited to working on curved surfaces. Other advantages of the disc: less vibration and noise development, cool grin more→ding (less heat discolouration)
 |
Fast Powerful Cutting - The Expert for Metal Cutting Disc provides powerful cutting performance in metal with maximum safety. The disc is made of premium aluminium oxide with advanced phenol resin, wh more→ich copes with demanding applications while delivering good results. Moreover, the disc's precision-manuf
 |
Impressive Lifetime, Maximum Safety - The X-LOCK Expert for Metal Grinding Disc delivers an impressively long lifetime on metal with maximum safety. The disc's premium aluminium-oxide abrasive grain, more→selected functional fillers and additives in a modern phenol resin bond matrix are particularly suited for metal applications. Its precision-manuf
 |
3x faster than a standard concrete grinding head - Grinding large concrete surfaces has always been a time-consuming job, and therefore expensive. The EXPERT Concrete is faster than even a benchmark B more→osch diamond grinding head: It achieves this thanks to its integration of Diamond Technology with the latest design innovations. The dust accumulation in conventional grinding heads for concrete prevents them working to their full efficiency: The L-shaped grinding segments on the EXPERT head are optimised for effective removal of surface material. This material is immediately fed into the large slots, which ensure fast dust extraction. For anyone who needs to grind large concrete surfaces, the Bosch …
Wire & Cup Brushes321
 |
Price from £10.34 up to £13.95
Compare prices5→Compare prices and buy Bosch X Lock Crimped Brass Wire Cup Brush 75mm X-Lock c
Extra-Fine Finish on Metal - The X-LOCK Clean for Metal Cup Brush, Crimped Wire, Brass-Coated provides an extra-fine surface finish. Fitted with brass-coated crimped wire for light-to-medium
 |
Price from £6.95
Compare prices4→Compare prices and buy Draper 3 Piece Crimped Wire Brush Set WBSET3
This set of wire brushes is designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces. The brushes are made from hardened dipped brassed steel wire, which more→gives a high level of durability and resistance to oxidation. The brushes are strong enough to provide reliable performance, and the crimping is flexible to tackle recessed areas and irregular surfaces. The set includes a 25mm wire end brush, 50mm wire cup brush, and a 50mm wire wheel brush. Fitted with a non-slip 6.35mm hex shank. Compatible with most drill drivers and drills with a 13mm chuck. Conforms to EN1083-1 and EN1083-2 Features and Benefits • Set includes a 25mm wire end brush,…
 |
Price from £3.49
Compare prices3→Compare prices and buy Faithfull Crimped Wire Wheel Brush 75mm 6mm Shank WBS75C
This Faithfull crimped steel Wire Circular Brush is designed for light to medium-duty applications such as cleaning metal surfaces prior to welding or painting. Fitted with a 6mm (1/4in) shank and des more→igned to operate with power tools up to a maximum of 4,500/min. Shaft: 6mm (1/4in). Wire: 0.30mm crimped steel wire. Conforms to ISO 9001 and DIN EN1083-1 and 2 standards.Diame
 |
Price from £29.99 up to £30.95
Compare prices3→Compare prices and buy Sealey VS1900 14 Piece Injector Bore Cleaning Brush Set
Ideal for cleaning and decarbonising areas with limited access, especially injector apertures before refitting. Set includes three brass brushes, two end brushes 15/19mm, one extension bar, one steel more→rod and six blanking plugs. Features and Benefits • Ideal for cleaning and decarbonising areas with limited access, especially injector apertures before refitting. • Set includes: - 3-Piece Brass Brushes; Ø18, 20, 25mm, - 2-Piece End Brushes; 15 x 19mm, - Extension Bar (x1), - 1-Piece Steel Rod, - 6-Piece Blanking Plugs. • Model No. VS1900 Specifications Model No VS1900 Brand: Sealey Brush Size: Ø18, 20, 25mm Brush Type: Brass & Steel Extension Bar Length: 200mm Nett Weight: 0.26kg
 |
Price from £41.95
Compare prices3→Compare prices and buy Lessmann 0.5 Steel Wire Knot Cup Brush 100mm M14 x 2.0 Thread LES486217
Knot Cup Brushes are for heavy-duty use for the preparing of metal surfaces before painting, and the removal of slag, rust, scale or concrete waste.Lessmann knotted brushes are filled with a special s more→teel wire of high tensile strength in order to meet the demands of this type of brush. Products marked with a * have a bridle fitted which an be removed to expose a further 20mm of useable wire.Stability bridle fitted.Diameter
 |
Price from £14.95
Compare prices4→Compare prices and buy Bosch 0.5mm Knotted Conical Steel Wire Wheel Brush 100mm M14 Thread 260862
Coarse Finish on Metal - The Heavy for Metal Bevel Brush delivers an extra-coarse surface finish. Its conical bevel brush is fitted with knotted wire for heavy-duty cleaning applications in hard-to-re more→ach areas. It is suitable for cleaning smaller steel surfaces and in grooves or on edges at high circumferential speeds. Ideal for use in metal, this brush is also suitable for removing heavy rust, paint stripping, deslagging, deburring, descaling and cleaning welding seams. It is intended for use with angle grinders with an M14 thread. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface …
 |
Price from £2.95
Compare prices4→Compare prices and buy Sealey Flat Wire Brush 50mm 6mm Shank SFB50
Suitable for use with power drills. Ø6mm Shaft. Crimped brassed steel filaments add extra rigidity and cleaning power. Features and Benefits • Suitable for use with power drills. Ø6mm Shaft. • Crimpe more→d brassed steel filaments add extra rigidity and cleaning power. • Model No. SFB50 Specifications Model No SFB50 Brand: Sealey Diameter: Ø50mm Maximum Speed: 4500rpm Nett Weight: 0.055kg Shaft Diameter: Ø6mm
 |
Price from £15.95 up to £20.99
Compare prices4→Compare prices and buy Faithfull Wire Cup Brush T/Knot 100X M14X2 0,50Mm FAIWBT100
Twist Knot Wire Cup Brush for heavier duty applications such as the removal of slag, rust, scale or even dried concrete. Designed for use with a compatible thread angle grinder. Suitable for industria more→l use and more specialist applications. Features: For heavier duty applications For use with angle grinders For use with angle grinders Specifications: Dimensions: H:13.3 x W:8.0 x D:11.0 cm Colour: Multi Guarantee:5 years Material: Metal Model Number: FAIWBT100
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
