Car Wires & Cables Active

Connects2 CT51-TY01 Toyota Amplified Active System Car Stereo Retention Interface AdapterThis adaptor is required to replace factory fitted amplified radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector and actives the factory on board amplifierKey Features:Allows the installation of an aftermarket head unit into a vehicle with an OEM amplifierFits the following vehicles:ManufacturerModelNoteYear FromYear ToHeadunitConnectionToyotaLandcruiser100 Model2002OEM SpecificToyotaPrado1202003OEM Specific *Disclaimer*This product has been developed through carefully documented data …

Car Make Car Model From Year To Year Volvo 940 1990 1998 Volvo 760 1990 1998 Volvo 850 1990 1998 *Disclaimer* This product has been developed through carefully documented data and research. Connects2 Ltd. or Car Audio Centre cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle manufacturing changes or options, or damage that may occur in the vehicle during the installation of components. All application data is subject to change.Please check the connections in the vehicle match the harness you are purchasing.

This adaptor will enable you to replace your factory fitted stereo with an aftermarket unit and connect it to your factory fitted amplified system.Fits the following models:Saab 9-3 2006>2013Saab 9-5 2006>2013 *Disclaimer* This product has been developed through carefully documented data and research. Connects2 Ltd. or Car Audio Centre cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle manufacturing changes or options, or damage that may occur in the vehicle during the installation of components. All application data is subject to change.Please check the connections in the vehicle match the harness you are purchasing.

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness purchased.Audi / VW / Skoda / Fiat and other vehicles tend not to have an ignition switched live feed.In these cases it is necessary to manually connect a spurred live feed from fuse box for example to feed switched power so the new stereo turns on and off with the key.The wire in particular on the new wiring harness will be the red wire. *Disclaimer* This product has been developed through carefully documented …

Connects2 CT51-VL02 Volvo XC90 2002 Onwards Amplified Active System Car Stereo Retention Interface AdapterThis adaptor is required to replace factory fitted amplified radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector and actives the factory on board amplifier *Disclaimer*This product has been developed through carefully documented data and research. Connects2 Ltd. or Car Audio Centre cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle manufacturing changes or options, or damage that may occur in the vehicle during the

Connects2 CT51-NS01 Nissan Amplified Active System Car Stereo Retention Interface AdapterThis adaptor is required to replace factory fitted amplified radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector and actives the factory on board Harmon Kardon amplifier Key Features:Allows the installation of an aftermarket head unit into a vehicle with an OEM amplifierFits the following vehicles:ManufacturerModelNoteYear FromYear ToHeadunitConnectionNissan350Z20032010BOSE & Infinity Amplified SystemOEM SpecificNissanMurano20052008BOSE & Infinity Amplified SystemOEM

Connects2 CT51-TY05 Toyota Amplified Active System Car Stereo Retention Interface AdapterThis adaptor is required to replace factory fitted amplified radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector and actives the factory on board amplifierKey Features:Allows the installation of an aftermarket head unit into a vehicle with an OEM amplifierFits the following vehicles:ManufacturerModelNoteYear FromYear ToHeadunitConnectionToyotaAvensisRetains JBL Amplfied Systems, 28 Pin Connector20112015 OEM SpecificToyotaCorollaRetains JBL Amplfied Systems, 28 Pin Connector20112015

Connects2 CT51-TY04 Toyota Amplified Active System Car Stereo Retention Interface AdapterThis adaptor is required to replace factory fitted amplified radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector and actives the factory on board amplifierKey Features:Allows the installation of an aftermarket head unit into a vehicle with an OEM amplifier *Disclaimer* This product has been developed through carefully documented data and research. Connects2 Ltd. or Car Audio Centre cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.Compatible with following vehicles:Car Make / Model Year NotesAudi A6 1994 - 1997 For use with VW / BOSE / Nokia DSP sound systemConnection: 10 Way ISO *Disclaimer*This product has been developed through carefully documented data and research. Connects2 Ltd. or Car Audio Centre cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle manufacturing changes or options, or damage that may occur in the vehicle during the installation of components. All

This Active System Adapter is compatible with the following cars:Mercedes M - Class 1998 > W163For all vehicles with Bose Systems. Mercedes M - Class 1998 > W163For all vehicles with Bose Systems. *Disclaimer* This product has been developed through carefully documented data and research. Connects2 Ltd. or Car Audio Centre cannot be held responsible for discrepancies/inconsistencies that may occur due to vehicle manufacturing changes or options, or damage that may occur in the vehicle during the installation of components. All application data is subject to change. Please check the connections in the vehicle match the harness you are purchasing.

This adapter allows an aftermarket head unit to be installed, while retaining the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.Plug and PlayCAN-BusPark BrakeReverseIgnitionIlluminationAmp RetentionCompatible with following vehicles:CAR MAKE / MODEL YEAR REMARKSPorsche 911 2004 - 2008 For Fibre Optic Amp Retention. Includes Cable For Vehicles With ISO ConnectorConnection: Mini ISOPorsche Boxster 2004 - 2008Porsche Cayman 2005 - 2009 *Disclaimer*This product has been developed through carefully documented data and research. Connects2 Ltd. or Car Audio Centre cannot be held responsible for discrepancies/inconsistencies that …