Other for Motorcycles Draper

Expert Quality for intricate work. Zinc alloy body with soft grip and a twelve segment blade incorporating a metal guide shroud for extra protection. Includes push button blade positioner segment break off recess and two spare blade strips.PTDDRPDIR82836

Fully flexible plated stem
With claw action pick-up end
Controlled from spring-loaded grip
Part Number:5010559396696

Expert Quality screwdrivers with hardened SVCM satin chrome plated hexagonal blades. Attached to a soft grip oil and solvent resistant handle with integrated toughened 'Pound Thru' metal cap designed for receiving hammer blows.PTDDRPDIR35184

Manufactured from carbon steel which is hardened and tempered with a satin chrome finish. Features a shot blast scraper end. For cleaning cylinder heads removing old sealants and carbon etc.PTDDRPDIR36923

Extending bit holder, ideal for use in tight and hard to reach spaces. They are durable crewdriver bits are chrome vanadium steel with a shot blast finish
Bit holder also has a series of notches which makes it easy to lock at different lengths
1/4" Square drive sockets are chrome plated for corrosion protection
Supplied inside a convenient carry case
Draper lifetime warranty

Step drill bit with 2mm increments perfect for drilling into steel brass copper aluminium wood and plastics. Manufactured from good quality high-speed steel correctly hardened for a longer life. Drill steps marked at graduations: 4 6 8 10 12 14 16 18 20mm.PTDDRPDIR71220

Aluminium with heavy duty soft rubber face to prevent marking. Supplied with heavy duty magnets which stick to the face of the vice jaws.PTDDRPDIR14180

Material: Aluminium/Steel
Designed for pinpoint lubrication to small and awkward areas
Needle Length: 40mm
Model number: 43982

Versatile nitrile gloves offering superior strength dexterity and resistance to oils and aqueous chemicals. Made from synthetic rubber. Suitable for single use. Supplied as a box of 100.PTDDRPDIR31035

Pocket COB and SMD LED slimline light offering a maximum brightness of 100 Lumens. Made from lightweight aluminium there are four different light settings to choose from and strong magnets located on the back and base of the lamp for hands-free use. The head vertically folds to a maximum of 180° to help re-direct the beam where its most needed. The light is powered by a rechargeable 0.35Ah li-ion battery and there is a LED charging indicator which flashes while it's charging and stays lit once fully charged. There is also a warning light to inform when the battery is low. It takes approximately 2.5 hours to fully charge the light and it can run for a maximum of 6 hours. Supplied with USB-C c…

Expert Quality for the removal of seized pistons without damaging outer piston surface. Knurled clamp blocks allow secure grip of inner piston face. Self-locking mechanism ensures tight grip on piston during removal.PTDDRPDIR30838

Compact and durable COB LED mini flood light and power bank for charging mobile devices. Fitted with a strong magnetic base and useful hanging hook for hands-free use. Provides three light output settings: low high and flash offering a brightness of 500-1000 Lumens (low to high/flash). Simple push button operation for on/off and lighting modes with memory function set to recall the last lighting mode used. Fitted with an integral adjustable bracket which can rotate through 180° for optimal light positioning and ring finger for portability. USB input and output with power bank function for charging electronic devices. Supplied with USB-C charging cable.PTDDRPDIR88595

For use on small bore cylinders i.e. motor cycles etc. with capacities between 25 and 57mm. The flexible drive shaft allows easy alignment whilst working with the honing pressure adjustable to suit the particular application. Suitable for use with an electric or air drill the maximum working speed is 2400r/min. Overall length 210mm. Supplied with 220 grit stone set which are also available separately - Stock No. 56247.PTDDRPDIR56244

Fast wireless charging pad capable of charging one device at a time. Fitted with strong magnetic panels on the front and back to hold the device with a metal surface in place while charging. The LED charging indicator flashes green when charging. There is a pull-out phone holder suitable to hold QI enabled (wireless charging) smartphones up to 166 x 80 x 10mm in size. The charging pad is mountable to a non-metallic surface or wall using the two screw hole fixings (screws not supplied). IP20 rated. Compatible with the Draper range of wireless/USB rechargeable lights including Mini-Flood Light (Stock No. 65688), Head Torch (Stock No. 65689) and Hand Torch (Stock No. 65690) - sold separately. Supplied …

For use on cylinders with capacities between 51 and 177mm i.e cars vans trucks marine and industrial applications. The flexible drive shaft allows easy alignment whilst working with the honing pressure adjustable to suit the particular application. Suitable for use with an electric or air drill the maximum working speed is 2400r/min. Supplied with 180 grit stone set which is also available separately as are other grades. Overall length 300mm.PTDDRPDIR56246

Mainly used in the aeronautics, defence and racing industries for wire locking fixings in safety critical applications. Manufactured from chrome vanadium steel, hardened and tempered with painted handles, chrome plated spiral screw assembly and polished faces. Maximum wire capacity: twist 1.5mm diameter and cut 2.5mm diameter. Features and Benefits • Mainly used in the aero, defence and racing industries for wire locking fixing in safety critical applications • Maximum wire capacity: Twist 1.5mm dia., cut 2.5mm.(stainless steel) Contents 1 x Wire Twisting Pliers, 250mm

Features: Fast wireless charging pads offering simultaneous charging for up to two devices Pull-out phone holder for securing QI enabled mobile phones whilst charging Strong magnets on the front for attaching Draper wireless charging products Strong magnetic panels on the rear for mounting to magnetic surfaces Mountable to non-metallic surfaces like walls and van panelling, using built-in screw holes Ultra-tough ABS and nylon polymer IK07 construction - 2m drop proof IP20 dust and water resistance USB-C charging cable and 3-pin UK plug supplied Specifications: Dimensions: H:36.2 x W:11.0 x D:11.0 cm Colour: Blue Guarantee:1 year Material: Plastic Model Number: 65793

7W COB LED inspection lamp with an SMD LED torch built into the pivoting and swivelling head allowing the light to be used in any 360 degree position. Fitted with a dimming function delivering a light output of between 70 and 700 lumens a power indicator a convenient magnetic base and a hook for hands-free use. Supplied with a Micro USB cable just plug into any micro USB charger for up to 15 hours of continuous use with a four hour charging time (depending on the charger unit).PTDDRPDIR11689

7W COB LED inspection lamp with an SMD LED torch built into the pivoting and swivelling head allowing the light to be used in any 360° position. Fitted with a dimming function delivering a light output of between 70 and 700 lumens a power indicator a convenient magnetic base and a hook for hands-free use. The Micro USB charger provides up to 15 hours of continuous use with a four hour charging time.PTDDRPDIR98346

7W COB LED inspection lamp with an SMD LED torch built into the pivoting and swivelling head allowing the light to be used in any 360° position. Fitted with a dimming function delivering a light output of between 70 and 700 lumens a power indicator a convenient magnetic base and a hook for hands-free use. The Micro USB charger provides up to 15 hours of continuous use with a four hour charging time.PTDDRPDIR98348

10W COB inspection lamp with four light setting a battery power indicator and an SMB LED torch on the tip. Charged via a micro USB cable. Manufactured from shock resistant plastic and fitted with a 180° swivelling hook and nylon hookon the backand also fitted with three high power magnetsfor hands-free operation. Supplied with a micro USB to standard USB cable and USB charger.PTDDRPDIR11767

11W COB inspection lamp with four light setting a battery power indicator and an SMB LED torch on the tip. Charged via a micro USB cable. Manufactured from shock resistant plastic and fitted with a 180° swivelling hook and nylon hookon the backand also fitted with three high power magnetsfor hands-free operation. Supplied with a micro USB to standard USB cable and USB charger.PTDDRPDIR11765

10W COB inspection lamp with four light setting a battery power indicator and an SMB LED torch on the tip. Charged via a micro USB cable. Manufactured from shock resistant plastic and fitted with a 180° swivelling hook and nylon hookon the backand also fitted with three high power magnetsfor hands-free operation. Supplied with a micro USB to standard USB cable and USB charger.PTDDRPDIR11766

10W COB inspection lamp with four light settings a battery power indicator and an SMB LED torch on the tip. Charged via a micro USB cable. Manufactured from shock resistant plastic and fitted with a 180° swivelling hook and nylon hook on the back and also fitted with three high power magnets for hands-free operation. Supplied with a micro USB to standard USB cable and USB charger.PTDDRPDIR11764