Other for Motorcycles OptiMate

OptiMate O-10 replacement linking shrouds and caps for SAE connectors. Features Fits the OptiMate two-pin SAE connector plugs Includes 2 caps (1 colored – 1 black) & 2 shrouds The rubber seal protects the SAE connection

OptiMATE Cable TM-73. A 2.5 meter extension cable that allows a pre-2015 AccuMate or pre-2012 OptiMate with TM connectors to be used further away from the vehicle or battery. Simply plug one end into the AccuMate or OptiMate outlet and the other end into the vehicle. Rugged cable and "glide-guide" TM connectors provide a reliable connection. Can also be used with "Power Accessories" such as USB chargers, flashlights, etc. to extend their range from the battery connection cable. Features Length: 250 cm 2-pole KET plug to 2-pole KET socket Max. Cable load: 5 A Use at very low temperatures: down to -40 ° C Cable remains flexible at sub-freezing temperatures High quality cable, designed by TecMate…

5 Amp low temperature charging cable extension with weather and dirt protected SAE connection system. Features O-03 length: 180 cm / 6 ft O-13 length: 460 cm / 15 ft O-33 length: 100 cm / 40 inch Industry standard 2-pin SAE connector Max. Cable load: 5 A Use at very low temperatures: down to -40 ° C Cable remains flexible at sub-freezing temperatures Includes an in-line rubber gasket for the OptiMATE high performance SAE connector High quality cable, designed by TecMate

OptiMATE Cable TM-74. Battery connection cable for older OptiMate, AccuMate and Oximiser chargers. Features Battery terminals with Easy-Grip rubber grips OptiMATE-KET/TM connector (white) for OptiMate III, AccuMate 612, OptiMate PRO and Oximiser chargers Specially designed for round, square and flat battery connectors Cable length approx. 50 cm Max. Power: 10 Amps Can be used at low temperatures (-20° C) High quality cable, developed by TecMate

OptiMATE cable O-35. Connect your durable SAE battery cable to 2 pieces of heated clothing (jacket / gloves, etc.). Features Length: 30 cm 2 x DC 2.5 mm sockets 2-pin industry standard SAE connector Max. Cable load: 10 A Use at very low temperatures: down to -40 °C Cable remains flexible at sub-freezing temperatures Includes in-line seals for DC 2.5 mm and OptiMATE high performance SAE connectors High quality cable designed by TecMate

Convert your older TecMate or British charger battery cable to SAE connector with weather protected sleeve and cap!
Length=6″/15cm.
-40°C/-40°F very low temperature use.
Cable max. rating: 5 Amp. 15A fuse.
KET 2 pole connector with locking clip converts to an industry standard 2-pin SAE connector.

OptiMATE cable O-30. Electrify your tank bag or handlebar bag with a cable pass-through or even your fixed luggage cases. Create a weatherproof electrical pass-through from SAE to SAE with a flat profile. Installation is simple. Cut a 14 mm diameter hole through the dedicated crosshair power inlet of your tank bag or handlebar bag, or drill through the hard wall of the case to accept the M14 connector and threaded nut. Custom gaskets are provided for ROUND (Wunderlich) and OVAL (SW Motech) power inputs and for the hard pannier wall. A DC 2.5mm to SAE adapter completes the installation. Features Low profile 90° angle inlet with M14 threaded tube and nylon nut (requires 14 mm hole) Custom seals f…

Extension for 5.A charger cable with splash and dirt proof SAE connection system.Length.4.6.m.Industry standard two-pin SAE connectors.Max rating of the cable:5.A.20.?C./.4.?F, use in low temperatures.Includes in-line rubber seal for the OptiMATE heavy-duty SAE connector.

OptiMATE cable O-02. Plug with swivel adapter, fits Ø12 mm motorcycle/DIN or Ø21 mm AUTO sockets, with industry standard 2-pin SAE connector. Features Length: 50 cm 2-pole SAE connection according to industry standard 8 A fuse (in plug) Max. cable load: 5 A Use at very low temperatures: down to -20 °C With rubber cable seal for OptiMATE heavy-duty SAE connection High quality cable, developed by TecMate

OptiMATE cable O-36. Adapter from DIN plug 90° to 2 x Ø 21 mm car sockets. Features Length: 45 cm 2-pin SAE plug according to industry standard Max. cable load: 10 A Use at very low temperatures: down to -40 °C Cable remains flexible at sub-freezing temperatures Includes an in-line rubber seal for the OptiMATE high performance SAE connector High quality cable designed by TecMate

Waterproof battery cable with charging status monitor for 12.8V and 13.2V LifePO4/ LFP battery in your parked performance vehicle.Battery status 24/7 just by flashing an LED! SAE quick connect charging port to charge the battery when needed.Monitor the charging of a vehicle´s lithium starter battery or check if the vehicle´s charging system is working properly.Battery charge level:The LED that matches the charge level flashes every 10 seconds (long-term consumption less than 0.2 mA).Vehicle Charging System:LED arrow mode is activated when the charging voltage reaches the lithium effective charging range of 14.2.V.14,5.V (.green LED).The OVERLOAD warning is activated from 14.6.V+.SAE charging po…

Monitor the charge of the 12V lead-acid battery of a stored powersports vehicle or check if the vehicle´s charging system is working properly.2 automatic modes:battery charge level monitor (single LED flashing mode) and charging system check (arrows mode).4 LEDs cover the voltage range from fully charged to discharged.of all 12V batteries, including higher voltage AGM motorsport batteries (4th LED 12.7V).Battery charge level:The LED that matches the charge level flashes every 5 seconds (long-term consumption less than 0.2 mA).Vehicle Charging System:LED arrow mode is activated when the charging voltage reaches a minimum of 13.5.V (.green LED) or the ideal range of 14.V+ (.green LED).SAE charging p…

OptiMATE cable O-105. The portable 3300 mA Dual USB charger, with 90° elbow BIKE plug connector that fits your BMW and Triumph motorcycle – the popular choice of BMW riders! Connects to Ø 12 mm DIN / BIKE 12 V socket found on BMW and Triumph motorcycles. Charges 2 x USB devices with up to 3300 mA current available to share, or charge 1 x USB-C device fast. – Charge current adapts to each connected device for safe recharging. Creates weatherproof seal against inserted USB cable, or ‘rideproof’ cap protects USB port not in use – Worry free phone, camera or GPS charging in any weather! Built in protection turns off USB charging & prevents your parked vehicle’s LFP (LiFePO4) or AGM (Pb)battery fr…

OptiMATE 1 Duo, inexpensive 12 V battery maintenance for all batteries! OptiMATE 1 Duo provides precise microprocessor controlled charging and long term maintenance. Maintain any type of 12 volt lead acid battery without overcharging, plus capped/wet batteries, AGM (MF) or GEL encapsulated batteries and 12.8 / 13.2 V lithium (LiFePO4) batteries. Ideal for vehicles that are used or stored infrequently or seasonally. The OptiMATE maintenance program delivers only what the battery needs, never too much or too little. Features Recommended for: AGM, STD, GEL 12 V batteries from 2 to 30 Ah and Lithium (LiFePO4) 12.8/13.2 V batteries from 1 - 8 Ah Programme control: Fully automatic Features: Automatically …

General characteristics:State of charge checker, all 12V lead-acid batteries and 12.8V and 13.2V lithium batteries.Special functions.Displays static voltage and state of charge percentage for 12V AGM, GEL and STD lead-acid and 12.8V and 13.2V LFP/LiFeP04 lithium batteries.Easy-to-understand comparison screen compares voltage to state of charge for all vehicle starting battery technologies.The smart choice for sales services:Check new batteries before selling or test returned batteries.Technical characteristics.Very simple use:Connect the clamps to the battery and read the result.The OptiMate battery tester´s microprocessor consumes very little battery power to find out and display its status.-…

Tecmate OptiMATE GOLD series: 9-stage encapsulated battery-saving 12V/ 12.8V 1.25A charger & maintenance unit TM630. OptiMate 4 Quad Program, for the ultimate maintenance of the high-tech 12V/12.8V battery in your adventure, touring, cruiser or racing motorcycle or ATV, side-by-side and jet boat - the world s most advanced battery charger for motorsports! Quad program Select program 1 or 3 to charge the battery directly or via a live (hot) 12V socket*, or program 2 or 4 to charge via a BMW CAN-Bus controlled 12V socket*. * requires optional cable accessory for connection to the socket Fully automatic multi-stage program safely brings the battery to full charge - select battery type and charging …

Optimate Lithium 4s 6A - the LITHIUM series PRO battery charger for the 12.8V/13.2V LiFeP04/LFP battery in performance/race bikes, cars or crafts - the choice for racers/dealers! Features Ideal for: Lithium (LiFePO4) 12.8 V / 13.2 V batteries from 3 - 72 Ah Charging current: 6 A (Ampmatic) Charging voltages: nominal: 12.8 V-13.2 V range: 0.5 V - 14.4 V Operation: Fully automatic (in 10 steps) Starts from 0.5 V with continuous monitoring / testing of charge absorption or bad / shorted cell condition Unnecessary (and unsafe) charging of a defective battery is prevented Usage: Indoor/outdoor (lowest temperature: -40 °C) Input: Global (100-240 V 50-60 Hz), high efficiency (CEC listed), fully enclosed S…

Ideal for 12V lead-acid batteries in the above-mentioned vehicles/boats.
The fully automatic multi-step program allows you to charge the battery safely.
Plug into battery and Optimate 6 Ampmatic does the rest, no monitoring required
Included components: weatherproof battery power cable and battery terminal set included.