Other for Motorcycles UNIOR

Product features.- M26x1.- material:premium plus carbon steel.- surface finish:blacken to standard DIN 50938.Advantages:- allows flywheel removal on the motorcycle.- On the puller, there is an attachment for an open-end wrench, which - should be hold the magnet.Usage:- for removal of flywheels with external thread.

Material:premium chrome vanadium steel.drop forged, entirely hardened and tempered.surface finish:trivalent chrome plated according to ISO 1456:2009.Lenght 500mm.

Product features.- The flexible magnetic pickup is designed to collect metal objects from hard to reach spots.Advantages:- It features a flexible stem with a strongly magnetic tip.- The magnet is capable of lifting metal objects of up to 1 kg.- The tool is fitted with an ergonomically designed handle, ensuring easy and efficient operation.

Jaws drop forged from premium plus carbon steel, entirely hardened and tempered.-handles made from sheet metal.-surface finish:nickel plated.-screw phosphated.Max diameter 30mm.

Jaws drop forged from premium plus carbon steel, entirely hardened and tempered.-handles made from sheet metal.-surface finish:nickel plated.-screw phosphated.Max diameter 30mm.

5x crosstip (PH) screwdriver CR (article 615CR) dim.PH 0x60, PH 1x80, PH 2x100, PH 3x150, PH 4x200.

Product features.- M38x1.5.- material:premium plus carbon steel.- surface finish:blacken to standard DIN 50938.Advantages:- allows flywheel removal on the motorcycle.- On the puller, there is an attachment for an open-end wrench, which - should be hold the magnet.Usage:- for removal of flywheels with external thread.

It is used for the control of the tension of the drive beltsControlling tool is mounted onto the belt.On the marked part of the engine the belt is forced by hand to establish the sag of the belt so that it is in conformance with the pressure force of 45N and with the sag prescribed by motorbike producer.material:premium plus carbon steelsurface finish:chrome plated according to ISO 1456:2009.

Screw extractor.- 1xM3 - M6, 2xM6 - M8, 3xM8 - M11, 4xM11 - M14, 5xM14 - M18, 6xM18 - M24.

5x flat screwdriver TBI (article 605TBI) dim.0.5x3.0x80, 0.8x4.0x100, 1.0x5.5x125, 1.2x6.5x150, 1.2x8.0x175.

Product features.Advantages:- This adjustable tool is easy to navigate through difficult-to-reach areas.- To enable quick and reliable gripping of objects, it has three claws that extend or return to their original position upon pressing or releasing the button, respectively.How to use the tool:- for lifting small especially non-metallic parts like bolts, nuts, screws.

Product features.-material:premium plus carbon steel.- surface finish:trivalent chrome plated to standard ISO 1456:2009.Usage:- The tool is used for compressing brake pistons when replacing brake pads.The tool is useful for compressing single, double and triple brake pistons The tool enables quick and easy pressing of brake pistons back into the housing without additional damage to the piston or the housing.Important!.For compressing double or triple brake pistons, we leave the used brake pads in the brake housing.This will prevent one of the pistons being pushed from the housing.after compressing replace the worn out brake pads with the new one.

7x screwdriver TBI with TX profile (article 621TBI) dim.TX 10, TX 15, TX 20, TX 25, TX 27, TX 30, TX 40.

Product features.- Safety twist plier is a versatile tool to help you to do reliable safety wiring (lock wiring) rapidly and consistently.- Safety wiring remains the most positive and assured method of securing critical fasteners that must not be allowed to back out:any tendency of the fastener to loosen is counter acted by tightening of the safety wire.twisting and cutting capacity:- 0.5mm dia stainless wire without heat treated.- 0.8mm (Dia.) soft wire.Usage:- Twisting of bolts, oil caps, drain cocks, valves and single twist electrical connectors.

Product features.- material:premium plus carbon steel.- heavy duty double - component handles.- jet stamp UNIOR.- for automotive pressed axlecuffs OETIKER®.

Product features.- material:premium plus carbon steel.- material pivoting tip:special carbon tool steel.- surface finish:trivalent chrome plated to standard ISO 1456:2009.- tips black finish.- heavy duty double - component handles.- jet stamp UNIOR.- for hose clips on cooling, heating, fuel or screen-washer systems.Advantages:- fits most standard sized clamps.- position lock makes it easy to replace hose clamps.

Product features.- material gripping arms:carbon tool steel.- for assembling or disassembling oil filters.- removes all type of oil filters from 60 to 120 mm diameter.Advantages:- arms are ribbed, for better gripping oil filters.

Product features.- Dimension of box:448 x 198 x 54.Set includes:- 6x hex socket 1/2´´, long type (article 192/2HXL) dim.5x100, 6x100, 7x100, 8x100, 10x100, 12x100.- 11x hex socket 1/2´´ (article 192/2HX) dim.4, 5, 6, 7, 8, 9, 10, 12, 14, 17, 19.- 1X Reversible ratchet 1/2´´.- accessories 1/2´´.2x extension bar (125, 250mm).

Product features.- Dimension of box:448 x 198 x 54.Set includes:- 18x socket 1/2´´, 12 point (article 190/1 12P) dim.10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30, 32.- 1X Reversible ratchet 1/2´´.- accessories 1/2´´.1x sliding T - handle, 2x extension bar (125, 250mm), 1x universal joint.

Product features.- Dimension of box:448 x 198 x 54.Set includes:- 18x socket 1/2´´, 6 point (article 190/1 6P) dim.10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30, 32.- 1X Reversible ratchet 1/2´´.- accessories 1/2´´.1x sliding T - handle, 2x extension bar (125, 250mm), 1x universal joint.

Product features.- Dimension of box:321 x 198 x 54.Set includes:- 14x socket 3/8´´, 6 point (article 238/1 6P) dim.6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19.- 1x reversible ratchet 3/8´´.- accessories 3/8´´.1x offset handle, 1x sliding T - handle, 2x extension bar (125, 250mm), 1x universal joint.- 10x screwdriver socket 3/8´´.hex (article 236/2HX dim.4, 5, 6, 8, 10, article 236/2HXL dim.4, 5, 6, 8, 10).