Micrometers & Calipers A&D

The Moore & Wright MW279-01A Micrometer Stand is designed for micrometers up to 100mm (4in). It has a painted cast iron base with plastic covered clamping jaws and the angle of the jaws can be adjusted.PTDMAW27901A

The Moore & Wright 100 Series Vernier Calipers have a standard workshop model design. They are made of hardened alloyed stainless steel and have a chromed scale with engraved graduations. The calipers allow 4-way measurement and the measuring surface is micro-lapped. The calipers are manufactured to DIN 862 standards. Supplied in a plastic box.The MAW10015BI calipers have the following specifications: Range: 0-150mm (0-6in).Resolution: 0.02mm (0.001in).Additional Information:• Graduation (mm): 0.02• Graduation (in): 0.001• Size (mm): 150• Size (in): 6

The Moore & Wright DPC Series Digital Calliper has a polycarbonate frame and offers 4-way measurement (mm/inch absolute/incremental) with an accuracy of ± 0.2mm/0.008in. The calliper can be zeroed at any point on the scale.Supplied with a CR2032 battery and a vinyl pouch. Specification:Range: 0-150mm (0-6in).Resolution: 0.01mm (0.0005in).Jaws: 40mm.PTDMAW11015DPC

The Moore & Wright 200 Series MW200-01 Analogue External Micrometer has a hammertone finish frame with an insulated grip, a satin chrome scale and tungsten carbide measuring faces. It has a tapered design for easier access to difficult areas. The micrometer has an adjusting key, locking lever and a constant force ratchet for ease of use. It is manufactured to DIN 863/1 standards, and supplied in plastic case. Specification; Range: 0-25mm.Resolution: 0.01mm.Accuracy: 0.004mm.Additional Information:• Micrometer Type: External• Metric/Imperial: Metric• Min. Measurement (mm): 0• Max. Measurement (mm): 25• Graduation (mm): 0.01

The Moore & Wright 100 Series Vernier Calipers have a standard workshop model design. They are made of hardened alloyed stainless steel and have a chromed scale with engraved graduations. The calipers allow 4-way measurement and the measuring surface is micro-lapped. The calipers are manufactured to DIN 862 standards. Supplied in a plastic box.The MAW10020BI calipers have the following specifications: Range: 0-200mm (0-8in).Resolution: 0.02mm (0.001in).PTDMAW10020BI

The Moore & Wright 100 Series Vernier Calipers have a standard workshop model design. They are made of hardened alloyed stainless steel and have a chromed scale with engraved graduations. The calipers allow 4-way measurement and the measuring surface is micro-lapped. The calipers are manufactured to DIN 862 standards. Supplied in a plastic box.The MAW10030BI calipers have the following specifications: Range: 0-300mm (0-12in).Resolution: 0.02mm (0.001in).PTDMAW10030BI

The Moore & Wright Traditional External Micrometer has a blue textured frame finish with tungsten carbide measuring faces and a tapered bow frame. The 'speeder' type ratchet locking lever and adjusting key make this micrometer easy to use. It has a 6.5mm spindle diameter. The micrometers are manufactured to BS870 DIN 863/1 ISO 361 standards. Supplied in plastic pocket case.The 1965 Traditional External Micrometer has the following specification: Micrometer Range: 0-1in. Measuring Faces: Flatness: 0.00005in Parallelism: 0.0001in Accuracy: 0.0001in.Resolution: 0.001in.PTDMAW1965

The Moore & Wright Traditional External Micrometer has a blue textured frame finish with tungsten carbide measuring faces and a tapered bow frame. The 'speeder' type ratchet locking lever and adjusting key make this micrometer easy to use. It has a 6.5mm spindle diameter. The micrometers are manufactured to BS870 DIN 863/1 ISO 361 standards. Supplied in plastic pocket case.The 1965M Traditional External Micrometer has the following specification: Micrometer Range: 0-25mm.Measuring Faces: Flatness: 0.001mm Parallelism: 0.003mm Accuracy: 0.003mm.Resolution: 0.001mm.PTDMAW1965M

The Moore & Wright DFC Series Digital Callipers are fitted with an extra-large easy-to-read display. The callipers have a high measuring speed of 120in per second and you can read/convert measurements in inch metric and fractions. The frame is made from stainless steel and provides extra smooth movements when measuring. Supplied with a CR2032 battery. Specification;Range: 0-150mm (0-6in).Resolution: 0.01mm (0.0005 / 1/128 in).Jaws: 40mm. PTDMAW11015DFC

The Moore & Wright 110-DBL Series Digital Calipers display values in mm/inch and feature ABS / INC measurement settings. All the metal parts are made from hardened stainless steel. The calipers offer a zero point at any position and a conveniently located on/off button. The calipers are manufactured to DIN 862 standards. Supplied with a CR2032 battery.The MAW11015DBL calipers have the following specifications: Range: 0-150mm (0-6in).Resolution: 0.01mm (0.005in).Jaws: 40mm. Supplied retail packed and in a plastic pouch.PTDMAW11015DBL

The Moore & Wright 966 Series Traditional External Micrometer has a blue textured frame finish with tungsten carbide measuring faces. The 'speeder' type ratchet locking lever and adjusting key make this micrometer easy to use. It has a 6.5mm spindle diameter. The micrometers are manufactured to BS870 DIN 863/1 ISO 361 standards. Supplied in a case.The 1966M/50 Traditional External Micrometer has the following specification: Micrometer Range: 25-50mm.Measuring Faces: Flatness: 0.001mm Parallelism: 0.003mm Accuracy: 0.003mm.Resolution: 0.01mm.PTDMAW1966M50

The Moore & Wright Traditional External Micrometer has a pearl chrome plated frame with insulation pads tungsten carbide measuring faces and a tapered bow frame. The 'speeder' type ratchet locking lever and adjusting key make this micrometer easy to use. It has a 6.5mm spindle diameter. The micrometers are manufactured to BS870 DIN 863/1 ISO 361 standards. Supplied in plastic pocket case. The 1961M Traditional External Micrometer has the following specification: Micrometer Range: 0-25mm. Measuring Faces: Flatness: 0.001mm Parallelism: 0.003mm Accuracy: 0.003mm.Resolution: 0.01mm.PTDMAW1961M

The Moore & Wright Water Resistant Series Digital Calliper are fitted with a patented ceramic capacitive sensor and a large LCD display offering 4-way measurement (mm/inch absolute/incremental). They can be zeroed at any point on the scale and are fitted with a conveniently located on/off switch. The callipers are manufactured to DIN 862 standards and are water and dust resistant to IP54 specifications. Supplied with a CR2032 battery. Specification:Range: 0-150mm (0-6in).Resolution: 0.01mm (0.0005in).Jaws: 40mm.PTDMAW11015WR

The Moore & Wright 200 Series Digital External Micrometer has a tapered design that provides easier access to difficult areas and a hammertone finished frame with a high quality insulated grip. It also has tungsten carbide measuring faces and a constant force ratchet on the thimble. The large LCD display allows for 4 types of measurement (mm/inch conversion and Absolute/Incremental reading) and a zero setting. The micrometers are manufactured to DIN 863 standards. Specification Range: 0-25mm/0-1in.Resolution: 0.001mm/.00005in.PTDMAW20001DBL

MW110 Basic Line Digital Calipers feature 4 way measurement with mm/inch measurement function settings with zero point at any position and thumb wheel for easy adjustment. They also feature a robust construction with all metal parts being made of hardened steel and supplied in a handy case for easy and safe storage. Features and Benefits 4 way measurement Large LCD display for easy reading metric and imperial measurement functions (mm/inch) Robust construction with hardened steel parts Thumb wheel for fine adjustment Suppiled in a handy case for safe storage Notes Extra batteries available - Order Code EDI -904-4000K

The Moore & Wright 890M Fixed Type Depth Micrometer has a fixed depth rod with a 6.5mm diameter. It is fitted with a 'speeder' type ratchet and a lock screw for added user convenience. Conforms to BS 6468:1984. Specification: Base Length: 63.5mm (2.1/2in)Range: 0-25mmResolution: 0.01mmPTDMAW890M

The Moore & Wright 900 Series Internal Micrometers comprise of a measuring head a set of extension rods and a spacing collar to facilitate alternative measuring ranges. These models (901 902 & 903) have detachable extension handles. All models supplied in a fitted case. These 900 Series Internal Micrometers conform to BS959 Standards.The Moore & Wright Internal Micrometer 901M Internal Micrometer has the following specification: Range: 25-55mm.Head Range: 5mm.PTDMAW901M

The Moore & Wright 110-DBL Series Digital Calipers display values in mm/inch and feature ABS / INC measurement settings. All the metal parts are made from hardened stainless steel. The calipers offer a zero point at any position and a conveniently located on/off button. The calipers are manufactured to DIN 862 standards. Supplied with a CR2032 battery.The MAW11030DBL calipers have the following specifications: Range: 0-300mm (0-12in).Resolution: 0.01mm (0.005in).Jaws: 60mm.PTDMAW11030DBL

The Moore & Wright 900 Series Internal Micrometers comprise of a measuring head a set of extension rods and a spacing collar to facilitate alternative measuring ranges. These models (901 902 & 903) have detachable extension handles. All models supplied in a fitted case. These 900 Series Internal Micrometers conform to BS959 Standards.The Moore & Wright Internal Micrometer 902M Internal Micrometer has the following specification: Range: 50-210mm.Head Range: 10mm.PTDMAW902M

The Moore & Wright 891 Series Adjustable Depth Micrometer features interchangeable depth rods with a 4mm diameter. These adjustable depth micrometers conform to BS6468:1984. Base Length: 63.5mm / 2.1/2in. The Moore & Wright 891M150 Adjustable Depth Micrometer has the following specification: Range: 0-150mm.Resolution: 0.01mm.PTDMAW891M150

The Moore & Wright 900 Series Internal Micrometers comprise of a measuring head a set of extension rods and a spacing collar to facilitate alternative measuring ranges. These models (901 902 & 903) have detachable extension handles. All models supplied in a fitted case. These 900 Series Internal Micrometers conform to BS959 Standards.The Moore & Wright Internal Micrometer 903 Internal Micrometer has the following specification: Range: 2-12in.Head Range: 0.50in.PTDMAW903

The Moore & Wright 900 Series Internal Micrometers comprise of a measuring head a set of extension rods and a spacing collar to facilitate alternative measuring ranges. These models (901 902 & 903) have detachable extension handles. All models supplied in a fitted case. These 900 Series Internal Micrometers conform to BS959 Standards.The Moore & Wright Internal Micrometer 903M Internal Micrometer has the following specification: Range: 50-310mm.Head Range: 10mm.PTDMAW903M