Effects Pedals

The DAddario XPND Pedal Riser is a blessing for the pedal enthusiast. Sometimes your favourite stompbox is at an awkward position or angle on stage making it hard to engage when its needed most. But with DAddarios handy pedal riser youll be troubled no more. Built from ultra-durable aluminium its simple to install and will raise your pedal to a prime easily accessible position.Even better you can fit a number of these across your XPND pedalboard if youre a real effects nut and with built-in cable routing itll help keep your stage manageable. This smaller size is ideal for a single pedal.

The RockBoard by Warwick RBO B Tray Universal PSU Mount is compatible with almost any multi-power supply unit. The RBO B THE TRAY can be mounted underneath any of the new RockBoard pedalboards (except the Duo 2.0). The pedalboards vertical support braces allow you to mount the tray without needing to drill any holes in the pedalboard. The tray can be easily fixed to the pedalboard using only 1 screw. Players can easily strap power supply units to the tray using screws or cable ties.

Momentary footswitch pedal for “non-latch” footswitch operations such as sustaining notes on electronic keyboards. It can also be used for things like punch in/out on Roland/BOSS recording gear.
Type: Sustain Pedal
Made in: Taiwan
Original Colour by Producer: Black;Black
Type-A Connector: Jack MONO 6,3 mm Male
Polarity Switch: No
Colour: Black
Cable Length: 3 m
Compatible with: Universal

Wall Adapter Power Supply. 9V DC power supply, 2000 mA, Polarity: (-) center, (+) ring, Euro plug
UK/EU Power supply included: No
Power Supply: 240V
ChargerType: Power Supply
Current (mA): 2000.0
Plug Type: Barrel
Polarity: Center Minus
Current: 2000 mA
Voltage: 9V
Made in: China

The Decksaver Eventide H9 & H9 MAX Cover is a high-quality cover designed to accommodate most two-button switch guitar pedals by Eventide protecting your equipment while on the move. The custom moulded protective cover is constructed from a highly-durable polycarbonate shell for optimal strength. The cover helps to protect your pedals from dust liquid accidental impact damage and more while on the move. The precision trimmed design of the Decksaver cover allows you to accommodate cables and more so your equipment is always ready to go. With its smoked clear finish the cover allows you to see your controller at all times. Please Note: Pictures are for reference only and the cover does not include …

Universal expression pedal. Compatible with most expression pedal sockets. Rubber feet for solid floor-grip. Rubber contact surface. Sensitivity pot. Polarity switch. 183 cm cable with 6,3 mm jack plug. Weight: 318 g. Colour: Black
Made in: China

The Decksaver BOSS STOMP BOX Cover is a high-quality cover designed to accommodate your stompbox protecting it while on the move. The custom moulded protective cover is constructed from a highly-durable polycarbonate shell for optimal strength. The cover helps to protect your pedals from dust liquid accidental impact damage and more while on the move. The precision trimmed design of the Decksaver cover allows you to accommodate cables and more so your equipment is always ready to go. With its smoked clear finish the cover allows you to see your controller at all times. Please Note: Pictures are for reference only and the cover does not include the pedal.

The Decksaver Eventide 3 SWITCH Cover is a high-quality cover designed to accommodate most three-button switch guitar pedals by Eventide protecting your equipment while on the move. The custom moulded protective cover is constructed from a highly-durable polycarbonate shell for optimal strength. The cover helps to protect your pedals from dust liquid accidental impact damage and more while on the move. The precision trimmed design of the Decksaver cover allows you to accommodate cables and more so your equipment is always ready to go. With its smoked clear finish the cover allows you to see your controller at all times. Please Note: Pictures are for reference only and the cover does not include …

The Decksaver BOSS 200 Cover is a high-quality cover designed to accommodate your electric guitar pedals protecting your equipment while on the move. The custom moulded protective cover is constructed from a highly-durable polycarbonate shell for optimal strength. The cover helps to protect your pedals from dust liquid accidental impact damage and more while on the move. The precision trimmed design of the Decksaver cover allows you to accommodate cables and more so your equipment is always ready to go. With its smoked clear finish the cover allows you to see your controller at all times. Please Note: Pictures are for reference only and the cover does not include the pedal.

The Nektar NP-1 and NP-2 universal foot switch pedals are solid, rugged and ideal for both studio and stage. Rubber gripping keep them in place during performances and polarity switching ensures they work with any keyboard or electronic product, requiring a foot switch. Universal piano style keyboard sustain foot switch pedal. Solid metal pedal and base with rubberized cover. Rubber foot plate for solid floor grip. Polarity switch - works with all keyboards. 6ft cable with 1/4'' TS jack plug. Weight: 1.6 lb.
Made in: China
Original Colour by Producer: Black;Black
Type-A Connector: Jack MONO 6,3 mm Male
Cable Length: 1,8 m
Polarity Switch: Yes
Type: Sustain Pedal
Colour: Black
Compatible with: …

Universal piano style sustain pedal. The Alesis ASP-2 is the perfect product for keyboard players who want the most realistic pedal action. Designed to work and feel just like an acoustic piano's sustain pedal, it has a specially-designed rubber bottom that grips the floor and won't move while you play. This classic-style pedal works with any Alesis digital piano, keyboard or MIDI controller and it also has a polarity switch for compatibility with virtually all other branded keyboards. Features: Classic and durable design with authentic piano style feel; Hardwired 6' (1.82m) cable with 1/4'' (6.35mm) connector; Polarity switch for compatibility with all electronic keyboards
Original Colour by …

Instrument Equipment Bag / Black / 0.18 kg / Foam Padding 8 mm

Custom moulded in the UK to fit the contours of the Boss 500 Series. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Boss 500 Series.
Compatible with: Boss 500 Series
Made in: United Kingdom
Type: Dust Cover

The Behringer PSU-HSB-ALL Power Adapter is designed for use with a wide variety of 9-volt devices including over 20 effects pedals at a time and keyboards. The adapter is supplied with 4 x assorted jumper cables and 2 x daisy-chain cables with 5 x connectors. With a transformerless design the PSU-HSB-ALL eliminates the 50/60-cycle hum and noise. The Behringer PSU-HSB-ALL features a 2-pin Euro plug and is designed for use with 220V - 240V sockets.

Kicking the ULTRA VIBRATO UV300 into action is like putting an invisible, automatic whammy bar on your guitar. From the gentle, pulsing rhythms of the ocean surf, to the wild, whirling effects of a rotating speaker system, the UV300 will bring a dose of days-gone- by to your sound. Select from Unlatch, Bypass or Latch modes and twist the dedicated Rise, Rate and Depth dials to create your ideal vibrato. In Latch mode, the effect is constantly on once you step on it. Unlatch mode only applies the effect while you press down on the pedal, so you can add vibrato to a single note if you like. Your guitar will be playing mind-games with everyone in earshot as familiar, but hardly ordinary, tones …

Tremolo effect pedal for electric guitar that offers the classic, warm and mind-bending tremolo effects of vintage ‘60s amps. It provides dedicated Rate, Wave and Depth controls for awesome sound shaping, features a status LED for effect on/off and battery check and a first-class electronic On/Off switch for highest signal integrity in bypass mode. Pedal runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included). Dimensions: 173 x 99 x 58 mm. Weight: 272 g.
UK/EU Power supply included: No
Battery Operation: Yes
Power Supply: Adapter
Type: Tremolo
Made in: China

The TC PowerPlug 9 gives you 9 volts of TC approved power for use with your TC Electronic pedals including TonePrint PolyTune Ditto Loopers and analog drive pedals.

Lets get it out the way this pedal sounds best cranked. Known as diming the controls the Behringer HM300 Heavy Metal Pedals circuit gained its legendary reputation by setting every control to 10 and letting the mayhem unfold. This gives the characteristic chainsaw-like buzzing distorted tone by pushing the circuit to extreme levels of clipping. This was the sound of Swedish death metal which is also the reason the original circuit has left such a significant legacy. If you need a distortion pedal to propel your tone to crushing new highs and deliver some of the most grinding textures available the HM300 supplies it in abundance.

The Pedaltrain Triple Pedal Booster allows you to customise your board to your needs by elevating up to three pedals by one inch to a more comfortable reachable and easy to use height.

A standard in pedal switches, with a medal body for durability. Use as a damper switch or as a control switch for functions such as start/stop. Attached cable.
Made in: Japan

The Behringer HD300 Heavy Metal Distortion Effects Pedal gives you the tools to create high levels of crushing distortion and sustain with ease. Theres serious sustain on offer giving you the ability to get really sludgy crushing sounds with ease. The expanded 4-knob layout gives you total control over your tone with a dedicated Bottom knob perfect for optimising the pedal for lower tunings or 7+ string guitars. If you need to go heavier go with the HD300.

Stereo chorus guitar effect pedal that features dedicated Level, Tone, Rate and Depth controls for an incredible sound shaping. It also provides a status LED indicator for effect on/off and battery check, and a first-class electronic on/off switch that maintains incredible signal integrity in bypass mode. Pedal can be powered by either a 9 V battery or DC power supply (not included). Dimensions: 54 x 70 x 122 mm. Weight: ca 330 g.
UK/EU Power supply included: No
Type: Chorus
Battery Operation: Yes
Power Supply: Adapter
Made in: China

The Strymon 9V UK Power Supply can be used to power your Strymon effects pedal and any other 9V centre negative pedals. Offering up to 667mA the Power supply will make sure your pedal is running at maximum allowing you to use your pedal to the best of its ability. Its low noise operation and automatic worldwide voltage conversation Strymons official power supply is perfect as a replacement to keep your pedal going no matter where.

Overdrive effect pedal for guitars that features original 4558 op amps and MA150 distortion diodes, and delivers the classic, authentic vintage vacuum tube-like sound. It provides dedicated Drive, Tone and Level, High/Low and Gain controls, blue status LED for effect on/off and battery check and top-quality on/off switch that maintains incredible signal integrity in bypass mode. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
UK/EU Power supply included: No
Type: Overdrive
Battery Operation: Yes
Made in: China