Effects Pedals

The Strymon Zuma Mounting Kit is the perfect solution for affixing your power supply in a discreet manner. It keeps your Zuma high current PSU stored underneath your PedalTrain board leaving more space for creative pedals up top! Please note: The Zuma Mounting Kit is not compatible with older model Pedaltrain boards (PT-1 PT-2 PT-JR) with holes on the rear brace instead of an open pass through for the length of the board. For those boards we recommend affixing Zuma to your board with Dual-Lock®.

Power Suply: Input: 100-240V ~ 50-60Hz / Output: 9V, 1.3APolarity: Center NegativeCompatible with DigiTech Whammy Pedal I, Whammy Pedal II, Whammy 4, Whammy 5, VHM5, MV5, GNX 1, VX 400, Vocalist Workstation, Vocalist Access, Vocalist VR, Vocalist Live 2, Vocalist Live 4, RP 3, S100, S400, RP 100 / 150 / 200 / 250 / 300 / 350, 500, RPx 400, Vocal 300, BP 200, Genesis 1, Jam Man Looper, Jam Man SoloXT Looper, Jam, Man Express XT Looper, Jam Man Stereo Looper, iStomp – 2,1 x 5,5 mm Barrel connector, negative center.
Made in: China
Polarity: Center Minus
Voltage: 9V
Plug Type: Barrel
Current (mA): 1300.0
Type: Power Supply

The Behringer CS400 Compression and Sustain Ultimate Dynamics effects pedal is the perfect option for balancing your level. Ensuring that your quieter strikes ring with resonance while simultaneously reducing harsh loud tones. With intuitive controls for Level Tone Attack and Sustain you can fully personalise this stompbox tone to maximise its full potential. Utilising an active status LED you will always be able to tell when this pedal is enhancing your dynamics.

A distortion effect pedal. It has dense, tube-like distortion sound with an endless sustain. Its ideal for extreme hard rock or heavy metal sounds. The sound is adjusted using Distortion, Level potentiometers and a 3-band equalizer. In addition, it is equipped with a blue status LED, foot switch and ¼'' In/Out connectors. The effect is powered by a 9 V battery or adapter (not included).
UK/EU Power supply included: No
Made in: China
Type: Distortion;Overdrive
Battery Operation: Yes

The Behringer UO300 Ultra Octaver Pedal gives you that extra cutting edge to your sound by adding up to two additional tones to your guitar. Offering notes that are either one to two octaves lower than the original sound packing in that extra punch. You can also adjust all three tones at any moment with intuitive and individual volume controls for each one which accompanies a switch that offers brilliant bass performance. With a performer friendly LED status light you can tell if the pedal is active wherever you are on stage.

D’Addario XPND Pedal Risers are designed to elevate pedals in those “tough to stomp” places. Mont the risers using the included hook and loop strips and raise any pedal a full inch, making it easy to access. You can align multiple risers across your board as needed, and with built-in-cut-outs for simple cable routing, adding risers is quick and hassle-free. XPND Pedal Risers are built to last and are available in single or double width, to accommodate dual-sized or multiple pedals.
Material: Aluminium
Variant: Large
Size: L
Colour: Black
Made in: Vietnam

The power supply 1 SPOT you can use anywhere in the world without a voltage converter because it automatically converts voltage worldwide. No need to worry about AC hum interfering with your sound either. the 1 SPOT is one of the quietest power sources. It is the 9V DC adapter that only takes up one spot on your power strip. With the ability to handle up to 1700mA, the 1 SPOT can power your entire pedalboard.
Connector Angle: Straight
Colour: Black
Polarity: Center Minus
Current (mA): 1700.0
Current: 1700 mA
Plug Type: Barrel
Power Supply: 9V;Adapter
Made in: China
Variant: 1 SPOT
Voltage: 9V
Type: Adapter
ChargerType: Power Supply…

The Behringer TU300 Chromatic Tuner is a necessity for any modern performer. Keeping your instrument at the correct tuning is essential to any performer and this makes that job a whole lot easier. Featuring a seven-segment LED indicator you can select between seven different tuning modes and an eleven-point stream meter can ensure the utmost precision at any moment. Whether you are on stage or in the studio this is the perfect companion for you.

Custom moulded in the UK to fit the contours of the Headrush Mx5. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Headrush Mx5.
Type: Dust Cover
Made in: United Kingdom
Compatible with: Headrush Mx5

500mA, 305 cm cable lenght, 9V DC, switchmode power supply, 2.1/5.5mm connector (inside/outside), power LED, polarity minus inside, weight: 142 g
Made in: China
ChargerType: Power Supply
Voltage: 9V
Plug Type: Barrel
Polarity: Center Minus
Number of Outputs: 1
Current: 201-500 mA
Current (mA): 500.0
UK/EU Power supply included: No
Power Supply: 240V

Approved 12V DC/1000mA power supply with negative centre that is compatible with TC Electronic stompbox pedals.
Current (mA): 1000.0
Made in: China
Voltage: 12V
Plug Type: Barrel
Number of Outputs: 1
Current: 701-1000 mA
UK/EU Power supply included: No
Power Supply: 240V
Polarity: Center Minus
ChargerType: Power Supply

Instrument Equipment Bag / Black / 0.49 kg

Custom moulded in the UK to fit the contours of the Strymon Nightsky & Volante. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Strymon Nightsky & Volante.
Made in: United Kingdom
Type: Dust Cover
Compatible with: Strymon Nightsky / Volante

Compact and portable 3-button footswitch pedal for use with several DigiTech products, including The Jimi Hendrix Experience, The JamMan, or Expression Factory. Pedal provides increased functionality and convenient Hands-free control over up/down selection of Models, Mode changes, Loop selection, automatic Start/Stops, and auto record where applicable. It is equipped with durable metal chassis construction, one 1/4" input and 3 m stereo TRS cable.
Number of Buttons: 3
Battery Operation: No
Power Supply: Passive
Type: Footswitch
Colour: Black

Get louder, get quieter, or get modulated with the outstanding FOOT CONTROLLER FCV100. This versatile pedal works equally well as a volume or modulation pedal – without tying up your hands or slowing down your performance.The FCV100 can accommodate two mono or one stereo instrument via its dual 1,4" Input jacks. By switching into Norm mode, the FCV100 is capable of controlling the volume of two individual instruments. In CV mode the FCV100 can control modulation and volume levels of other musical instruments by connecting Output 2 to the volume or modulation input of the instrument. In CV mode, when Output 2 is in use, Input/Output 1 can still be used for controlling the volume of another …

The TC Helicon Singles Connect Kit is a cable set for connecting up to four vocal effects pedals together. With minimal cable clutter and simple usage the Singles Connect Kit is an essential audio and power accessory kit for the VoiceTone Single pedals. Including a 12V/1A power supply DC interconnect/daisy-chaining cables and three short XLR cables the Singles Connect Kit opens up a wide range of options for connecting your effects.

Sustain pedal for Casio keyboards, plastic
Type: Sustain Pedal
Original Colour by Producer: Black;Black
Polarity Switch: No
Cable Length: 1,7 m
Compatible with: Universal
Type-A Connector: Jack MONO 6,3 mm Male
Colour: Black
Made in: China

Digital multi-effects pedal comparable to state-of-the-art studio processors that features 24-bit/40 kHz high-resolution stereo effects including Chorus, Flanger, Phaser, Delay, Tremolo and Pitch Shifter. It also provides dedicated Level control plus 2 additional parameter controls for adjustment of delay time, flanger rate etc., a status LED indicator for effect on/off and battery check, and a first-class electronic on/off switch that maintains incredible signal integrity in bypass mode. Pedal can be powered by either a 9 V battery or DC power supply (not included). Dimensions: 54 x 70 x 122 mm. Weight: ca 330 g.
Battery Type: 9V
Power Supply: 9V DC ( - )
UK/EU Power supply included: No
Battery …

A case style gig bag, ideally suited for the Pedal Baby 100. This tough vinyl gig bag is zippered on three sides and comes with a shoulder strap. There’s a separate space for pedals and cables along with a zipped pocket on top so you can fit your entire rig in a case smaller than a laptop bag. Padding has been added to the inside to provide extra support for your valuable gear.
Type: Soft Case
Colour: Black
Original Colour by Producer: Black;Black
Made in: United Kingdom

This well-built, real-feel pedal comes with a non-slip rubber plate — essential when performing on hardwood or slip-prone surfaces — and an extended cable (2.2 m) for stacked multi-keyboard setups. It is compatible with half-damper capable keyboards, and it can also serve as a standard pedal switch (for sustain, etc).
Original Colour by Producer: Black;Black
Made in: Malaysia
Type: Half Damper;Sustain Pedal
Polarity Switch: No
Type-A Connector: TRS 6,3 mm Jack
Cable Length: 2,2 m
Compatible with: Universal
Colour: Black

Simple sustain plastic pedal, suitable for all keyboards with standard sustain polarity. Cable length: 160cm.
Colour: Black
Cable Length: 1,6 m
Type-A Connector: Jack MONO 6,3 mm Male
Polarity Switch: No
Original Colour by Producer: Black;Black
Type: Sustain Pedal
Made in: China

The Eden Astroflange Bass Flanger Pedal is a bass-optimised flanger with detailed controls so you can craft your ultimate flanged tones. Specially designed for bass the dynamic response of this versatile pedal has been tailored for bass frequencies to deliver low-end shimmer. Sporting a simple yet adaptable four-knob layout its quick and easy to dial in a range of fantastic flanged sounds. The intuitive nature of these controls allows you to really dive into fine-tuning however. Velocity is your standard speed/rate control while Altitude adjusts the predominant frequencies affected by the flanging effect. The Low Cut offers even more depth by setting how much low-end is affected by the modulation.…

Universal pedalboard made from aluminium, for the storage of all commercially available floor effects. The cross bars (covered with Velcro), height and the tilt of the Pedalboard can be individually adjusted. Power supplies can be mounted below the board. Dimensions: 500 x 135 x 35 mm. Weight Pedalbay: 2,46 kg. Accessories (included): 2x black elastic bands, approx. 1.5m hook tape, soft carrying case with shoulder strap.
Original Colour by Producer: Black;Black
Made in: Germany
Type: Pedalboard
Colour: Black

Genuine Tube-like sound that makes it more than your average Screamer pedal! If you’re not playing through a real tube amp, cranked for overdrive, it’s difficult to get genuine tube overdrive sound. Using a FET Transistor System, which already has overdrive and distortion capabilities is a better approach to maintain the genuine sound you get from an actual analog tube amp. A FET allows you to bring out the harmonic attributes, and break-up the distortion into a finer grit, the way a real tube does. Now, your leads will sing richer and longer, and your rhythm will be more open and expressive than ever before. It all culminates into an overdrive that is superbly dynamic, with crisp precise clar…