Powerline Adapters Axis

If you want to move to IP and it is time to replace your analog video cameras, AXIS T8640 PoE+ over Coax Adapter Kit is an efficient way to make the switch – and keep your Coax cabling. AXIS T8640 PoE+ over Coax Adapter Kit includes two adapters, one for connecting a network camera to a Coax cable and one for connecting it to the network (see Typical set-up).Let your Coax cables do double-duty:- AXIS T8640 PoE+ over Coax Adapter Kit lets you reuse hard-to-replace or long-range Coax cabling when you replace your analog cameras with Axis network cameras. And you can integrate Power over Ethernet over Coax for efficient power management. Range distances depend on the power required and the type of…

- Reduced installation costs
- IEEE 802.3af compliance

Easier and faster installations

Power over Ethernet (PoE) offers an easy fast and cost-effective solution for supplying power to network video products without the need to install power outlets and electrical cabling.

No need for power outlets

With the use of Axis PoE products Axis network cameras and video encoders can receive both data and power over a single Ethernet cable. Network video products can thus be installed in areas where traditional power cabling and outlets are unavailable or difficult to install.

Axis PoE midspans and PoE splitters

Axis PoE midspans provide power (max. 15.4 W per port) over Ethernet cables …

Single port PoE midspan, IEEE 802.3af (15W). The midspan can be installed on a wall, shelf or DIN rail with an accessory DIN clip.

Ethernet has a limited cable length between the switch and the camera of 100m (328 ft.). When needed to cover a longer distance a switch is normally used as a repeater or optical fiber may be used.

To overcome this distance limit network installers can simply connect an AXIS T8129 PoE Extender in-line with the Cat-5e or Cat-6 cable and forward the rest to the camera. Dependent on midspan and camera type the connection in total can be between 200-400 meters (656-1312 ft.).

Compatibility
AXIS T8129 PoE Extender is compatible with all Axis network video products supporting PoE and it is both IEEE 802.3af and IEEE 802.3at compliant. Check in the Set-up tab for information typical connections …

AXIS TU8001 Ethernet Surge Protector helps reduce downtime service and maintenance of your system by shielding your PoE devices against transient voltage spikes in the Ethernet cable. It is a compact high-quality product validated to work seamlessly with Axis devices.N/AN/AAXIS TU8001 is perfect to be installed close to a PoE switch located indoors or in an outdoor electrical enclosure cabinet adjacent to a network camera or another device. Placing it in an enclosure you get less exposed wiring simpler troubleshooting of the whole system and less hardware visible on the pole. The product can be easily mounted on a wall or on a DIN rail.N/AN/AWith a network device and a surge protector from Axis …

AXIS 90 W Midspan AC/DC is for installations where mains power is not an option. With a power input of either 24 V AC or 20-26.4 V DC it can deliver up to IEEE 802.3bt (90 W) to the network device. 24 V AC can be needed in harsh environments where new cabling or installations are not an option and you need to retrofit box dome or PTZ cameras. 20-26.4 V DC can be used where battery back-up is needed or for solar-powered installations. Or when the network device is built in another equipment and is powered directly from it.

AXIS 30 W Midspan AC/DCN/AN/AAXIS 30 W Midspan AC/DC is ideal for installations where mains power is not an option. With a power input of either 10-28 V DC or 24 V AC it can deliver up to IEEE 802.3at (30 W) to your network device. AXIS 30 W Midspan AC/DC is plug-and-play and compatible with all Axis PoE devices which require up to 30 W power. 24 V AC can be needed in harsh environments where new cabling or installations are not possible and you need to retrofit box dome or PTZ cameras. 10-28 V DC can be used where battery back-up is needed or for solar-powered installations. Or when the network device is built in another equipment and is powered directly from it for example in an ATM.

NetworkPower over Ethernet (PoE)YesEthernet LAN data rates10,100,1000 Mbit/sEthernet interface typeGigabit EthernetFeaturesWall mountableYesProduct colourBlackRack mountingYesSafetyEC/EN/UL 62368 - 1, UL 508 EMC EN 550 24, EN 55032 Class A, FCC P art 15 Subpart B Class A, VCCI Class A, RCM AS/NZS CISPR32 Class A, ICES - 003 Class A, EAC Environment IEC 60068 - 2 - 6, IEC 60068 - 2 - 27, IEC 60068 - 2 - 32LED indicatorsAlarm, PoE, PowerPorts & interfacesDC-in jackYesEthernet LAN (RJ-45) ports

The AXIS T8129-E Outdoor POE Splitter is a reliable and durable device designed for outdoor installations in both residential and commercial settings. The device is housed in a sleek white casing that seamlessly blends with any outdoor environment.This POE (Power over Ethernet) splitter is specifically designed for smart homes, enabling users to conveniently power their compatible devices through a single Ethernet cable. With its advanced power management technology, the splitter efficiently distributes power to connected devices, ensuring stable and reliable performance.The AXIS T8129-E Outdoor POE Splitter is equipped with advanced safety features to protect connected devices from power surges,…