Pipe Cutters KNIPEX

Twist Cut for corrugated pipes with a 13 - 32 mm diameter. Great for cutting empty or ready-assembled corrugated pipes to length. Equipped with a recessed blades to help prevent injuries and a double-sided guide for a precise cut. Capable of an exact, flush cut, without damaging the internal cables. Features and Benefits Cut on the outside of fluting - no sharp raw edge inside the corrugated pipe Simple insertion of the corrugated pipe for reliable and simple cutting: no waste Slim and ergonomically shaped for work in poorly accessible areas Typical Applications Electrical Construction Plumbing Notes In the case of thick-walled corrugated pipes, re-apply after the circular cut just behind the …

Twist Cut for corrugated pipes with a 13 - 32 mm diameter. Great for cutting empty or ready-assembled corrugated pipes to length. Equipped with a recessed blades to help prevent injuries and a double-sided guide for a precise cut. Capable of an exact, flush cut, without damaging the internal cables. Features and Benefits Cut on the outside of fluting - no sharp raw edge inside the corrugated pipe Simple insertion of the corrugated pipe for reliable and simple cutting: no waste Slim and ergonomically shaped for work in poorly accessible areas Typical Applications Electrical Construction Plumbing Notes In the case of thick-walled corrugated pipes, re-apply after the circular cut just behind the …

Knipex 90 22 10 BK BiX Cutter for Plastic Pipes and Sealing Sleeves from Ø 20 to 50mm The Knipex BiX (carded) is a clever Pipe Cutter, it cuts pipes without shavings and fits comfortably in the hand. It can also cut high-temperature plastic drainpipes and electrical conduits in next to no time. Suited to cutting sealing sleeves during final assembly - close to the wall, standard-compliant. Features:
- Cuts unreinforced plastic pipes from Ø 20 to 50 mm with a wall thickness of up to 2.4 mm
- Cuts pipes quickly, cleanly and without shavings
- Cuts sealing sleeves approx. 2-3 mm from the wall
- Rotatable knife block for cutting plastic pipes (blade in the middle) and sealing sleeves (b…

Plastic pipe cutter for Flexible & Protective Tubes, ideal for cutting thin walled plastic pipes and flexible hoses, also with fabric reinforcement, of plastic and rubber up to 25.0 mm. Features and Benefits Opening spring and locking device Blades: special tool steel, oil-hardened, interchangeable Notes Not suitable for cutting cables

The Knipex DP50 Cutter will cut and chamfer all common domestic plastic drain pipes up to 50mm diameter in a single operation The Knipex DP50 is designed to cut plastic pipes of diameters 32mm, 40mm and 50mm, up 2.4mm thick. The cutter has an exchangeable blade with two cutting edges that can be reversed when showing signs of wear. Features:
- Reversible high-quality ball-bearing steel blade, can be easily replaced without tools
- Clean cut: no readjusting or deburring required, reducing potential blockages or damages of the seals
- Cuts high temperature and other plastic pipes with Ø 32, 40 or 50 mm and wall thicknesses up to 2.4 mm
- Optimal cutting due to slide-bearing and self-adjusting g…

Knipex PlastiCut Cutter for plastic pipes, plastic armoured pipes and hoses (also fabric reinforced) The Knipex 9020185SB (carded) PlastiCut Cutter has been designed for cutting thin-walled plastic pipes (armoured pipes) and hoses made of soft plastics and rubber (also fabric reinforced) up to an outer diameter of 25 mm. Thanks to the trapezoidal shape, the blade firstly cuts wedge-shaped into the material. The manual force initially acts on the tip of the blade and, during the cutting process, follows the shape of the material in a circular (radial) way from the inside out and onto the material. This prevents distortions as can arise when cutting using a conventional shearing action with two …

The Knipex 903102BK TubiX Pipe Cutter enables comfortable, easy cutting due to high-quality needle bearings in the cutting wheel and guide rolls The Knipex 903102BK has a QuickLock one-hand locking mechanism for independent holding and clamping on the tube. This 180mm long tool can cut pipes from 6 - 35mm and has an integrated deburring tool to smooth the edges afterwards. A spare cutting wheel is under the black panel in the handle. Easy one-handed pushing for quick adjustment to different tube sizes. Features: Cuts pipes from 6 - 35 mm (1/4" - 1 3/8") with wall thickness up to 2 mm Cutting wheel made of high-grade ball-bearing steel Quick replacement of the cutting wheel without any tools …

Knipex 90 31 02SB TubiX Pipe Cutter 6 - 35mm The Knipex 903102SB TubiX is capable of cutting copper, brass and stainless steel pipes with wall thickness up to 2mm and diameters of 6-35mm. Comes with an integral spare wheel and deburring tool. Features: 
- QuickLock single-handed quick adjustment: independent holding and clamping on the tube
- Easy one-handed pushing for quick adjustment to different tube sizes
- Comfortable: easy cutting due to high-quality needle bearings in the cutting wheel and guide rolls
- Cuts pipes from Ø 6 - 35 mm (1/4" - 1 3/8") with wall thickness up to 2 mm
- Cutting wheel made of high-grade ball-bearing steel
- Practical quick replace system for the cu…