Pipe Cutters Ridgid

Ridgid 32573 Autofeed 2-in-1 Ratcheting Pipe Cutter 6 - 28mm The Ridgid 32573 pipe cutter has a rugged and compact design with a handle that can be attached to the cutter and operated in ratchet steps as small as 10 degrees. Featuring the 2-in-1 Close Quarters Cutter where the cutter can be used alone or with the ratchet handle, a light and ergonomic accessory to help use the cutter in tight and restricted spaces. Features:
- RIDGID expands its tubing cutters offering for use in very tight and confined spaces
- The 118 Feed Assisted midget cutter teams up with a detachable Ratchet Handle that allows for easier cutting as well as increased productivity in tight and restricted spaces
- …

The RIDGID Screw Feed Tubing and Conduit Cutters provide clean, square cuts. They are fitted with an X-CEL Knob that can cut tubing more quickly and easily thanks to the larger, more ergonomic design. They can cut through copper, brass, aluminium and thin-wall steel. Models 10, 15 and 20 feature a convenient fold-away reamer.RIDGID Screw Feed No.15 Tubing and Conduit Cutter Capacity: 5-28mm (3/16 - 1.1/8in).Std. Wheel: F-158.Weight: 0.68kg. Additional Information:• Cutter Type: Aluminium/Brass/Copper• Min. Capacity (mm): 5• Max. Capacity (mm): 28

The RIDGID Stainless Steel Tubing & Conduit Cutter has been designed for optimised performance on Stainless Steel tubes. The cutter has a contoured frame that allows for easy alignment, even whilst adjusting the cutter to make a cut. It is fitted with an ergonomic, X-CEL knob that allows for easy and quick adjustments. There are six individual bearings in the 15-SI, which replace the traditional rollers. The bearings create a smoother cut and allow for increased speed and reduced drag around the tube when cutting. Capacity: 5-28mm (3/16 - 1.1/8in).Std. Wheel: E-1525.Weight: 0.68kg. Additional Information:• Cutter Type: Stainless Steel• Min. Capacity (mm): 5• Max. Capacity (mm): …

The RIDGID Quick-Acting Tube Cutters for Copper feature a quick-acting design, I-beam construction, hardened wear surfaces and thrust bearing slide assemblies for smooth operation. The X-CEL Knob cuts tubing more quickly and easily with the larger, more ergonomic design and the X-CEL wheel pin makes changing the cutter wheel quicker using the new ball detent design, with no tools needed and no lost clips. Also available in models for plastic pipe.RIDGID 31632 Quick-Acting 151 Tube Cutter For Copper Std. Wheel: E-3469.Capacity: 6-42mm (1/4 - 1.7/8in).Weight: 0.56kg.Additional Information:• Cutter Type: Copper• Min. Capacity (mm): 6• Max. Capacity (mm): 42

No.101 Suitable for use in confined areas on small diameter piping. High carbon steel cutting wheel and large knurled feed screw for easy control of cutting pressure for clean cuts.

Ridgid 31803 Quick Acting Tubing Cutter 6 - 65mm  The Ridgid 65S Tubing Cutter is designed for optimized performance on Stainless Steel tubes. With a quick-acting mechanism that rapidly adjusts to different sized tubing and for smoothness, six individual bearings replace traditional rollers.  Features:  
- The bearings create a smoother cut and allow for increased speed around the tube 
- A contoured frame allows for easy alignment while adjusting the cutter to make a cut 
- Specially designed Heavy Duty cutter wheel contains bearings to decrease rotations needed to complete a cut 
- Oversized, easy to grip, smooth X-CEL knob allows for easy and quicker adjustments 
- Fits comforta…

The RIDGID Screw Feed Tubing and Conduit Cutters provide clean, square cuts. They are fitted with an X-CEL Knob that can cut tubing more quickly and easily thanks to the larger, more ergonomic design. They can cut through copper, brass, aluminium and thin-wall steel. Models 10, 15 and 20 feature a convenient fold-away reamer.RIDGID Heavy-Duty Screw Feed No.20 Tubing and Conduit Cutter Capacity: 16-54mm (5/8 - 2.1/8in)Std. Wheel: E-1240.Weight: 0.79kg. Additional Information:• Cutter Type: Aluminium/Brass/Copper/Steel• Min. Capacity (mm): 16• Max. Capacity (mm): 54

The RIDGID Screw Feed Tubing and Conduit Cutters provide clean, square cuts. They are fitted with an X-CEL Knob that can cut tubing more quickly and easily thanks to the larger, more ergonomic design. They can cut through copper, brass, aluminium and thin-wall steel. Models 10, 15 and 20 feature a convenient fold-away reamer.RIDGID Screw Feed No.20 Tubing and Conduit Cutter Capacity: 16-54mm (5/8 - 2.1/8in)Std. Wheel: F-158.Weight: 0.79kg. Additional Information:• Cutter Type: Aluminium/Brass/Copper• Min. Capacity (mm): 16• Max. Capacity (mm): 54

The RIDGID Quick-Acting Tubing Cutter is fitted with a cutting wheel specifically designed to cut Pe pipe. The cutter is fitted with an ergonomic X-CEL Knob, that makes cutting tubing quicker and easier. It has a quick-acting design with an I-beam construction, featuring hardened surfaces and thrust bearing slide assemblies for smooth operation and increased working life. The X-CEL wheel pin allows you to change the cutter wheel quickly using the new ball detent design, with no tools needed and no lost clips.RIDGID 156-PE Quick-Acting Tubing Cutter For Polyethylene (PE) Pipe Capacity: 110-160mm (4.1/4 - 6in).Std. Wheel: E2880.Weight: 2.23kg.Additional Information:• Cutter Type: PE Plastic• …